linux.git/drivers/net/qlge, branch v2.6.31 Linux kernel source tree qlge: Fix sizeof usage. 2009-07-04T02:10:51+00:00 Ron Mercer ron.mercer@qlogic.com 2009-07-02T06:06:13+00:00 e332471c035708441de89d4c59f7f7cdc2700c0d Some usage was only sizing a pointer rather than the data type. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Some usage was only sizing a pointer rather than the data type.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qlge: Add/use function for link up/down. 2009-07-04T02:10:46+00:00 Ron Mercer ron.mercer@qlogic.com 2009-07-02T06:06:12+00:00 6a47330892e697ae27d2d56a3c4c7fec2015be93 We need to set/clear the mac address register when the link goes up/down respectively. Without this both ports of a 2-port device can end up with the same mac address in a bonding scenario. The new ql_link_on() and ql_link_off() will also be used in handling certain firmware events. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
We need to set/clear the mac address register when the link goes up/down
respectively.  Without this both ports of a 2-port device can end up
with the same mac address in a bonding scenario.
The new ql_link_on() and ql_link_off() will also be used in handling
certain firmware events.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qlge: Fix MAC address bonding issue. 2009-07-04T02:10:41+00:00 Ron Mercer ron.mercer@qlogic.com 2009-07-02T06:06:11+00:00 7fab3bfe08a2c5c4221685499ec4fef83ad82f83 This addes functionality to set/clear the MAC address in the hardware when the link goes up/down. The MAC address register is persistent across function resets. In bonding the same address can bounce from one port to the other. This can cause packets to be delivered to the wrong port. This patch clears the MAC address in the hardware when the link is down and sets it when the link comes up. It was found that pulling/pushing the cable from one port to another causes the same MAC address to be in both ports. The next patch in this series will use this functionality as well. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This addes functionality to set/clear the MAC address in the hardware
when the link goes up/down.
The MAC address register is persistent across function resets. In
bonding the same address can bounce from one port to the other.  This
can cause packets to be delivered to the wrong port.
This patch clears the MAC address in the hardware when the link is down
and sets it when the link comes up.
It was found that pulling/pushing the cable from one port to another
causes the same MAC address to be in both ports.
The next patch in this series will use this functionality as well.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qlge: Fix tx byte counter. 2009-07-04T02:10:37+00:00 Ron Mercer ron.mercer@qlogic.com 2009-07-02T06:06:10+00:00 13cfd5be53d01a9316907512f17f34d3858450e8 Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qlge: Fix redundant call to free resources. 2009-07-04T02:10:30+00:00 Ron Mercer ron.mercer@qlogic.com 2009-07-02T06:06:09+00:00 6e9e4795e688fd61fa83f7f4cad4992939fd4ca3 The caller will free acquired resouces if a failure occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The caller will free acquired resouces if a failure occurs.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qlge: Fix carrier on condition. 2009-07-04T02:10:26+00:00 Ron Mercer ron.mercer@qlogic.com 2009-07-02T06:06:08+00:00 8b007de19026e91991ae70ca0def31c42435e008 We were turning on the carrier without verifying the link was up. This adds link up to the link initialize check before turning carrier on. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
We were turning on the carrier without verifying the link was up.
This adds link up to the link initialize check before turning carrier
on.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qlge: Clear frame to queue routing before reset. 2009-07-04T02:10:21+00:00 Ron Mercer ron.mercer@qlogic.com 2009-07-02T06:06:07+00:00 a5f59dc926844bf95be2261c1bb0a24597b7a8c5 Not clearing the routing bits can cause frames to erroneously get routed to management processor. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Not clearing the routing bits can cause frames to erroneously get routed to
management processor.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qlge: Expand coverage of hw lock for config register. 2009-07-04T02:10:18+00:00 Ron Mercer ron.mercer@qlogic.com 2009-07-02T06:06:06+00:00 4322c5bee85ed58042ec04235ec7086065ad5074 The hardware semaphore covers the configuration register as well as the ICB registers. The ICB high and low regs contain the address of the initialization control block and the config register is used to signal the hardware that a block is ready to be downloaded. Currently we were only protecting the ICB regs. This changes expands to cover the config register as well. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The hardware semaphore covers the configuration register as well as the
ICB registers.  The ICB high and low regs contain the address of the
initialization control block and the config register is used to signal
the hardware that a block is ready to be downloaded.  Currently we were
only protecting the ICB regs.  This changes expands to cover the config
register as well.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-06-15T10:02:23+00:00 David S. Miller davem@davemloft.net 2009-06-15T10:02:23+00:00 9cbc1cb8cd46ce1f7645b9de249b2ce8460129bb Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c 
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c
trivial: fix ETIMEOUT -> ETIMEDOUT typos 2009-06-12T16:01:50+00:00 Jean Delvare khali@linux-fr.org 2009-06-04T14:20:28+00:00 3ac49a1c9928b4a242b3cb1d83bc1d5c9b8fcb50 fix ETIMEOUT -> ETIMEDOUT typos Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 
fix ETIMEOUT -> ETIMEDOUT typos

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>