linux.git/drivers/net/phy, branch vsnprintf

net: phy: avoid undefined behavior in *_led_polarity_set()

2024-12-19T00:50:23+00:00

gcc runs into undefined behavior at the end of the three led_polarity_set()
callback functions if it were called with a zero 'modes' argument and it
just ends the function there without returning from it.

This gets flagged by 'objtool' as a function that continues on
to the next one:

drivers/net/phy/aquantia/aquantia_leds.o: warning: objtool: aqr_phy_led_polarity_set+0xf: can't find jump dest instruction at .text+0x5d9
drivers/net/phy/intel-xway.o: warning: objtool: xway_gphy_led_polarity_set() falls through to next function xway_gphy_config_init()
drivers/net/phy/mxl-gpy.o: warning: objtool: gpy_led_polarity_set() falls through to next function gpy_led_hw_control_get()

There is no point to micro-optimize the behavior here to save a single-digit
number of bytes in the kernel, so just change this to a "return -EINVAL"
as we do when any unexpected bits are set.

Fixes: 1758af47b98c ("net: phy: intel-xway: add support for PHY LEDs")
Fixes: 9d55e68b19f2 ("net: phy: aquantia: correctly describe LED polarity override")
Fixes: eb89c79c1b8f ("net: phy: mxl-gpy: correctly describe LED polarity")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Andrew Lunn 
Link: https://patch.msgid.link/20241217081056.238792-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski

net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850

2024-12-03T02:56:41+00:00

Fix outdated MII_LPA data in the LAN88xx PHY, which is used in LAN7800
and LAN7850 USB Ethernet controllers. Due to a hardware limitation, the
PHY cannot reliably update link status after parallel detection when the
link partner does not support auto-negotiation. To mitigate this, add a
PHY reset in `lan88xx_link_change_notify()` when `phydev->state` is
`PHY_NOLINK`, ensuring the PHY starts in a clean state and reports
accurate fixed link parallel detection results.

Fixes: 792aec47d59d9 ("add microchip LAN88xx phy driver")
Signed-off-by: Oleksij Rempel 
Link: https://patch.msgid.link/20241125084050.414352-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski

net: phy: fix phy_ethtool_set_eee() incorrectly enabling LPI

2024-11-28T08:26:13+00:00

When phy_ethtool_set_eee_noneg() detects a change in the LPI
parameters, it attempts to update phylib state and trigger the link
to cycle so the MAC sees the updated parameters.

However, in doing so, it sets phydev->enable_tx_lpi depending on
whether the EEE configuration allows the MAC to generate LPI without
taking into account the result of negotiation.

This can be demonstrated with a 1000base-T FD interface by:

 # ethtool --set-eee eno0 advertise 8   # cause EEE to be not negotiated
 # ethtool --set-eee eno0 tx-lpi off
 # ethtool --set-eee eno0 tx-lpi on

This results in being true, despite EEE not having been negotiated and:
 # ethtool --show-eee eno0
	EEE status: enabled - inactive
	Tx LPI: 250 (us)
	Supported EEE link modes:  100baseT/Full
	                           1000baseT/Full
	Advertised EEE link modes:  100baseT/Full
	                                         1000baseT/Full

Fix this by keeping track of whether EEE was negotiated via a new
eee_active member in struct phy_device, and include this state in
the decision whether phydev->enable_tx_lpi should be set.

Fixes: 3e43b903da04 ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) 
Link: https://patch.msgid.link/E1tErSe-005RhB-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni

net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled

2024-11-24T14:49:41+00:00

This is a follow-up to 41ffcd95015f ("net: phy: fix phylib's dual
eee_enabled") and resolves an issue with genphy_c45_an_config_eee_aneg()
(called from genphy_c45_ethtool_set_eee) not seeing the new value of
phydev->eee_cfg.eee_enabled.

Fixes: 49168d1980e2 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Heiner Kallweit 
Reported-by: Choong Yong Liang 
Reviewed-by: Russell King (Oracle) 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-11-19T12:56:02+00:00

Merge in late fixes to prepare for the 6.13 net-next PR.

Conflicts:

include/linux/phy.h
  41ffcd95015f net: phy: fix phylib's dual eee_enabled
  721aa69e708b net: phy: convert eee_broken_modes to a linkmode bitmap
https://lore.kernel.org/all/20241118135512.1039208b@canb.auug.org.au/

drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
  2160428bcb20 net: txgbe: fix null pointer to pcs
  2160428bcb20 net: txgbe: remove GPIO interrupt controller

Adjacent commits:

include/linux/phy.h
  41ffcd95015f net: phy: fix phylib's dual eee_enabled
  516a5f11eb97 net: phy: respect cached advertising when re-enabling EEE

Signed-off-by: Paolo Abeni

net: phy: microchip_t1: Clause-45 PHY loopback support for LAN887x

2024-11-15T23:22:10+00:00

Adds support for clause-45 PHY loopback for the Microchip LAN887x driver.

Signed-off-by: Tarun Alle 
Reviewed-by: Andrew Lunn 
Link: https://patch.msgid.link/20241114101951.382996-1-Tarun.Alle@microchip.com
Signed-off-by: Jakub Kicinski

net: phy: fix phylib's dual eee_enabled

2024-11-15T22:27:37+00:00

phylib has two eee_enabled members. Some parts of the code are using
phydev->eee_enabled, other parts are using phydev->eee_cfg.eee_enabled.
This leads to incorrect behaviour as their state goes out of sync.
ethtool --show-eee shows incorrect information, and --set-eee sometimes
doesn't take effect.

Fix this by only having one eee_enabled member - that in eee_cfg.

Fixes: 49168d1980e2 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Russell King (Oracle) 
Reviewed-by: Heiner Kallweit 
Link: https://patch.msgid.link/E1tBXAF-00341F-EQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski

net: phy: dp83869: fix status reporting for 1000base-x autonegotiation

2024-11-15T03:11:03+00:00

The DP83869 PHY transceiver supports converting from RGMII to 1000base-x.
In this operation mode, autonegotiation can be performed, as described in
IEEE802.3.

The DP83869 has a set of fiber-specific registers located at offset 0xc00.
When the transceiver is configured in RGMII-to-1000base-x mode, these
registers are mapped onto offset 0, which should make reading the
autonegotiation status transparent.

However, the fiber registers at offset 0xc04 and 0xc05 follow the bit
layout specified in Clause 37, and genphy_read_status() assumes a Clause 22
layout. Thus, genphy_read_status() doesn't properly read the capabilities
advertised by the link partner, resulting in incorrect link parameters.

Similarly, genphy_config_aneg() doesn't properly write advertised
capabilities.

Fix the 1000base-x autonegotiation procedure by replacing
genphy_read_status() and genphy_config_aneg() with their Clause 37
equivalents.

Fixes: a29de52ba2a1 ("net: dp83869: Add ability to advertise Fiber connection")
Cc: stable@vger.kernel.org
Signed-off-by: Romain Gantois 
Link: https://patch.msgid.link/20241112-dp83869-1000base-x-v3-1-36005f4ab0d9@bootlin.com
Signed-off-by: Jakub Kicinski

net: phy: convert eee_broken_modes to a linkmode bitmap

2024-11-15T02:01:37+00:00

eee_broken_modes has a eee_cap1 register layout currently. This doen't
allow to flag e.g. 2.5Gbps or 5Gbps BaseT EEE as broken. To overcome
this limitation switch eee_broken_modes to a linkmode bitmap.

Signed-off-by: Heiner Kallweit 
Link: https://patch.msgid.link/dfe0c9ff-84b0-4328-86d7-e917ebc084a1@gmail.com
Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-11-14T19:29:15+00:00

Cross-merge networking fixes after downstream PR (net-6.12-rc8).

Conflicts:

tools/testing/selftests/net/.gitignore
  252e01e68241 ("selftests: net: add netlink-dumps to .gitignore")
  be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw")
https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/

drivers/net/phy/phylink.c
  671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled")
  7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"")

Adjacent changes:

drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
  5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
  e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()")

Signed-off-by: Jakub Kicinski