linux.git/drivers/net/phy, branch v5.4-rc6

net: phylink: Fix phylink_dbg() macro

2019-11-01T22:06:46+00:00

The phylink_dbg() macro does not follow dynamic debug or defined(DEBUG)
and as a result, it spams the kernel log since a PR_DEBUG level is
currently used. Fix it to be defined appropriately whether
CONFIG_DYNAMIC_DEBUG or defined(DEBUG) are set.

Fixes: 17091180b152 ("net: phylink: Add phylink_{printk, err, warn, info, dbg} macros")
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flag

2019-10-24T04:44:44+00:00

The LAN8740, like the 8720, also requires a reset after enabling clock.
The datasheet [1] 3.8.5.1 says:
	"During a Hardware reset, an external clock must be supplied
	to the XTAL1/CLKIN signal."

I have observed this issue on a custom i.MX6 based board with
the LAN8740A.

[1] http://ww1.microchip.com/downloads/en/DeviceDoc/8740a.pdf

Signed-off-by: Martin Fuzzey 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: bcm7xxx: define soft_reset for 40nm EPHY

2019-10-18T17:00:07+00:00

The internal 40nm EPHYs use a "Workaround for putting the PHY in
IDDQ mode." These PHYs require a soft reset to restore functionality
after they are powered back up.

This commit defines the soft_reset function to use genphy_soft_reset
during phy_init_hw to accommodate this.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Doug Berger 
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: micrel: Update KSZ87xx PHY name

2019-10-17T23:31:52+00:00

The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches.
Update the PHY ID and name to reflect that, as this family of switches
is commonly refered to as KSZ87xx

Signed-off-by: Marek Vasut 
Cc: Andrew Lunn 
Cc: David S. Miller 
Cc: Florian Fainelli 
Cc: George McCollister 
Cc: Heiner Kallweit 
Cc: Sean Nyekjaer 
Cc: Tristram Ha 
Cc: Woojung Huh 
Signed-off-by: David S. Miller

net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs

2019-10-17T23:31:51+00:00

The KSZ8051 PHY and the KSZ8794/KSZ8795/KSZ8765 switch share exactly the
same PHY ID. Since KSZ8051 is higher in the ksphy_driver[] list of PHYs
in the micrel PHY driver, it is used even with the KSZ87xx switch. This
is wrong, since the KSZ8051 configures registers of the PHY which are
not present on the simplified KSZ87xx switch PHYs and misconfigures
other registers of the KSZ87xx switch PHYs.

Fortunatelly, it is possible to tell apart the KSZ8051 PHY from the
KSZ87xx switch by checking the Basic Status register Bit 0, which is
read-only and indicates presence of the Extended Capability Registers.
The KSZ8051 PHY has those registers while the KSZ87xx switch does not.

This patch implements simple check for the presence of this bit for
both the KSZ8051 PHY and KSZ87xx switch, to let both use the correct
PHY driver instance.

Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795")
Signed-off-by: Marek Vasut 
Cc: Andrew Lunn 
Cc: David S. Miller 
Cc: Florian Fainelli 
Cc: George McCollister 
Cc: Heiner Kallweit 
Cc: Sean Nyekjaer 
Cc: Tristram Ha 
Cc: Woojung Huh 
Signed-off-by: David S. Miller

net: phy: Fix "link partner" information disappear issue

2019-10-16T20:17:01+00:00

Some drivers just call phy_ethtool_ksettings_set() to set the
links, for those phy drivers that use genphy_read_status(), if
autoneg is on, and the link is up, than execute "ethtool -s
ethx autoneg on" will cause "link partner" information disappear.

The call trace is phy_ethtool_ksettings_set()->phy_start_aneg()
->linkmode_zero(phydev->lp_advertising)->genphy_read_status(),
the link didn't change, so genphy_read_status() just return, and
phydev->lp_advertising is zero now.

This patch moves the clear operation of lp_advertising from
phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
if autoneg on and autoneg not complete, just clear what the
generic functions care about.

Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: Yonglong Liu 
Reviewed-by: Heiner Kallweit 
Signed-off-by: David S. Miller

phylink: fix kernel-doc warnings

2019-10-10T00:44:41+00:00

Fix kernel-doc warnings in phylink.c:

../drivers/net/phy/phylink.c:595: warning: Function parameter or member 'config' not described in 'phylink_create'
../drivers/net/phy/phylink.c:595: warning: Excess function parameter 'ndev' description in 'phylink_create'

Fixes: 8796c8923d9c ("phylink: add documentation for kernel APIs")
Signed-off-by: Randy Dunlap 
Cc: Russell King 
Signed-off-by: Jakub Kicinski

net: phy: at803x: use operating parameters from PHY-specific status

2019-10-05T01:11:08+00:00

Read the PHY-specific status register for the current operating mode
(speed and duplex) of the PHY.  This register reflects the actual
mode that the PHY has resolved depending on either the advertisements
of autoneg is enabled, or the forced mode if autoneg is disabled.

This ensures that phylib's software state always tracks the hardware
state.

It seems both AR8033 (which uses the AR8031 ID) and AR8035 support
this status register.  AR8030 is not known at the present time.

This patch depends on "net: phy: extract pause mode" and "net: phy:
extract link partner advertisement reading".

Reported-by: tinywrkb 
Reviewed-by: Andrew Lunn 
Tested-by: tinywrkb 
Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
Signed-off-by: Russell King 
Signed-off-by: David S. Miller

net: phy: extract pause mode

2019-10-05T01:11:08+00:00

Extract the update of phylib's software pause mode state from
genphy_read_status(), so that we can re-use this functionality with
PHYs that have alternative ways to read the negotiation results.

Tested-by: tinywrkb 
Reviewed-by: Andrew Lunn 
Signed-off-by: Russell King 
Signed-off-by: David S. Miller

net: phy: extract link partner advertisement reading

2019-10-05T01:11:08+00:00

Move reading the link partner advertisement out of genphy_read_status()
into its own separate function.  This will allow re-use of this code by
PHY drivers that are able to read the resolved status from the PHY.

Tested-by: tinywrkb 
Signed-off-by: Russell King 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller