linux.git/drivers/net/phy, branch v5.18-rc2 Linux kernel source tree net: phy: micrel: Remove DT option lan8814,ignore-ts 2022-04-04T11:40:42+00:00 Horatiu Vultur horatiu.vultur@microchip.com 2022-04-01T11:05:22+00:00 76e9ccd6894377bc3cf7fbdea90b0af2cb4eb12a When the PHY and the MAC are capable of doing timestamping, the PHY has priority. Therefore the DT option lan8814,ignore-ts was added such that the PHY will not expose a PHC so then the timestamping was done in the MAC. This is not the correct approach of doing it, therefore remove this. Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When the PHY and the MAC are capable of doing timestamping, the PHY has
priority. Therefore the DT option lan8814,ignore-ts was added such that
the PHY will not expose a PHC so then the timestamping was done in the
MAC. This is not the correct approach of doing it, therefore remove
this.

Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: micrel: Remove latency from driver 2022-04-04T11:40:42+00:00 Horatiu Vultur horatiu.vultur@microchip.com 2022-04-01T11:05:21+00:00 b814403a8cd8b28a2c0497e211f029786394531d Based on the discussions here[1], the PHY driver is the wrong place to set the latencies, therefore remove them. [1] https://lkml.org/lkml/2022/3/4/325 Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Based on the discussions here[1], the PHY driver is the wrong place
to set the latencies, therefore remove them.

[1] https://lkml.org/lkml/2022/3/4/325

Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: broadcom: Fix brcm_fet_config_init() 2022-03-25T23:59:21+00:00 Florian Fainelli f.fainelli@gmail.com 2022-03-24T23:24:38+00:00 bf8bfc4336f7a34e48b3bbd19b1542bf085bdc3d A Broadcom AC201 PHY (same entry as 5241) would be flagged by the Broadcom UniMAC MDIO controller as not completing the turn around properly since the PHY expects 65 MDC clock cycles to complete a write cycle, and the MDIO controller was only sending 64 MDC clock cycles as determined by looking at a scope shot. This would make the subsequent read fail with the UniMAC MDIO controller command field having MDIO_READ_FAIL set and we would abort the brcm_fet_config_init() function and thus not probe the PHY at all. After issuing a software reset, wait for at least 1ms which is well above the 1us reset delay advertised by the datasheet and issue a dummy read to let the PHY turn around the line properly. This read specifically ignores -EIO which would be returned by MDIO controllers checking for the line being turned around. If we have a genuine reaad failure, the next read of the interrupt status register would pick it up anyway. Fixes: d7a2ed9248a3 ("broadcom: Add AC131 phy support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220324232438.1156812-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
A Broadcom AC201 PHY (same entry as 5241) would be flagged by the
Broadcom UniMAC MDIO controller as not completing the turn around
properly since the PHY expects 65 MDC clock cycles to complete a write
cycle, and the MDIO controller was only sending 64 MDC clock cycles as
determined by looking at a scope shot.

This would make the subsequent read fail with the UniMAC MDIO controller
command field having MDIO_READ_FAIL set and we would abort the
brcm_fet_config_init() function and thus not probe the PHY at all.

After issuing a software reset, wait for at least 1ms which is well
above the 1us reset delay advertised by the datasheet and issue a dummy
read to let the PHY turn around the line properly. This read
specifically ignores -EIO which would be returned by MDIO controllers
checking for the line being turned around.

If we have a genuine reaad failure, the next read of the interrupt
status register would pick it up anyway.

Fixes: d7a2ed9248a3 ("broadcom: Add AC131 phy support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220324232438.1156812-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-03-17T20:56:58+00:00 Jakub Kicinski kuba@kernel.org 2022-03-17T20:56:06+00:00 e243f39685af1bd6d837fa7bff40c1afdf3eb7fa No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phy: mscc: Add MODULE_FIRMWARE macros 2022-03-17T16:06:09+00:00 Juerg Haefliger juerg.haefliger@canonical.com 2022-03-16T15:18:35+00:00 f1858c277ba40172005b76a31e6bb931bfc19d9c The driver requires firmware so define MODULE_FIRMWARE so that modinfo provides the details. Fixes: fa164e40c53b ("net: phy: mscc: split the driver into separate files") Signed-off-by: Juerg Haefliger <juergh@canonical.com> Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The driver requires firmware so define MODULE_FIRMWARE so that modinfo
provides the details.

Fixes: fa164e40c53b ("net: phy: mscc: split the driver into separate files")
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phy: Kconfig: micrel_phy: fix dependency issue 2022-03-15T11:28:56+00:00 Anders Roxell anders.roxell@linaro.org 2022-03-14T11:02:54+00:00 231fdac3e58f4e52e387930c73bf535439607563 When building driver CONFIG_MICREL_PHY the follow error shows up: aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info': micrel.c:(.text+0x1764): undefined reference to `ptp_clock_index' micrel.c:(.text+0x1764): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index' aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_probe': micrel.c:(.text+0x4720): undefined reference to `ptp_clock_register' micrel.c:(.text+0x4720): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register' Rework Kconfig for MICREL_PHY to depend on 'PTP_1588_CLOCK_OPTIONAL'. Arnd describes in a good way why its needed to add this depends in patch e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies"). Reported-by: kernel test robot <lkp@intel.com> Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220314110254.12498-1-anders.roxell@linaro.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
When building driver CONFIG_MICREL_PHY the follow error shows up:

aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0x1764): undefined reference to `ptp_clock_index'
micrel.c:(.text+0x1764): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x4720): undefined reference to `ptp_clock_register'
micrel.c:(.text+0x4720): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register'

Rework Kconfig for MICREL_PHY to depend on 'PTP_1588_CLOCK_OPTIONAL'.
Arnd describes in a good way why its needed to add this depends in patch
e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies").

Reported-by: kernel test robot <lkp@intel.com>
Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220314110254.12498-1-anders.roxell@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: sfp: add 2500base-X quirk for Lantech SFP module 2022-03-15T10:41:20+00:00 Michael Walle michael@walle.cc 2022-03-12T20:50:14+00:00 00eec9fe4f3b9588b4bfa8ef9dd0aae96407d5d7 The Lantech 8330-262D-E module is 2500base-X capable, but it reports the nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the module. The following in an EEPROM dump of such a SFP with the serial number redacted: 00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00 ???...? @????... 10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20 ??..Lantech 20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32 ....8330-262 30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb D-E V1.0?R.? 40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX .?..FCXXXXXXXXXX 50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98 220214 h??? 60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54 EXTREMELY COMPAT 70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20 IBLE Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220312205014.4154907-1-michael@walle.cc Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
The Lantech 8330-262D-E module is 2500base-X capable, but it reports the
nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the
module.

The following in an EEPROM dump of such a SFP with the serial number
redacted:

00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00    ???...? @????...
10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20    ??..Lantech
20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32        ....8330-262
30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb    D-E     V1.0?R.?
40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX    .?..FCXXXXXXXXXX
50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98        220214  h???
60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54    EXTREMELY COMPAT
70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20    IBLE

Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220312205014.4154907-1-michael@walle.cc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: phy: marvell: Fix invalid comparison in the resume and suspend functions 2022-03-14T22:08:37+00:00 Kurt Cancemi kurt@x64architecture.com 2022-03-12T20:15:13+00:00 837d9e49402eaf030db55a49f96fc51d73b4b441 This bug resulted in only the current mode being resumed and suspended when the PHY supported both fiber and copper modes and when the PHY only supported copper mode the fiber mode would incorrectly be attempted to be resumed and suspended. Fixes: 3758be3dc162 ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.") Signed-off-by: Kurt Cancemi <kurt@x64architecture.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220312201512.326047-1-kurt@x64architecture.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
This bug resulted in only the current mode being resumed and suspended when
the PHY supported both fiber and copper modes and when the PHY only supported
copper mode the fiber mode would incorrectly be attempted to be resumed and
suspended.

Fixes: 3758be3dc162 ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.")
Signed-off-by: Kurt Cancemi <kurt@x64architecture.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220312201512.326047-1-kurt@x64architecture.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-03-11T01:16:56+00:00 Jakub Kicinski kuba@kernel.org 2022-03-11T01:16:56+00:00 1e8a3f0d2a1ef544611a7ea4a7c1512c732e0e43 net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
net/dsa/dsa2.c
  commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails")
  commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master")
https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/

drivers/net/ethernet/intel/ice/ice.h
  commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU")
  commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device")
https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/

drivers/staging/gdm724x/gdm_lte.c
  commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()")
  commit 4bcc4249b4cf ("staging: Use netif_rx().")
https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phy: meson-gxl: improve link-up behavior 2022-03-10T22:57:02+00:00 Heiner Kallweit hkallweit1@gmail.com 2022-03-09T21:04:47+00:00 2c87c6f9fbddc5b84d67b2fa3f432fcac6d99d93 Sometimes the link comes up but no data flows. This patch fixes this behavior. It's not clear what's the root cause of the issue. According to the tests one other link-up issue remains. In very rare cases the link isn't even reported as up. Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()") Tested-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Sometimes the link comes up but no data flows. This patch fixes
this behavior. It's not clear what's the root cause of the issue.

According to the tests one other link-up issue remains.
In very rare cases the link isn't even reported as up.

Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()")
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>