linux.git/drivers/net/phy, branch v2.6.15

[PATCH] missing license for libphy.ko

2005-12-24T15:05:51+00:00

Andy,

libphy has no license tag. Something like the attached (untested!) patch
is needed. Hopefully such a change finds its way into 2.6.15.

filename: /lib/modules/2.6.15-rc5-3-ppc64/kernel/drivers/net/phy/libphy.ko
vermagic:       2.6.15-rc5-3-ppc64 SMP gcc-4.1
depends:
srcversion:     ACC921B5E82701BE1E6F603

 drivers/net/phy/phy_device.c |    4 ++++
 1 files changed, 4 insertions(+)

Signed-off-by: Jeff Garzik

Remove linux/version.h include from drivers/net/phy/* and net/ieee80211/*.

2005-11-06T04:39:54+00:00

Unused, and causes the files to be needlessly rebuilt in some cases.

[PATCH] phy address mask support for generic phy layer

2005-11-05T19:40:55+00:00

Adds a phy_mask field to struct mii_bus and uses it.  This field
indicates each phy address to be ignored when probing the mdio bus.

This support is needed for the fs_enet and ibm_emac drivers to be
converted to the generic phy layer among other drivers. Many systems
lock up on probing certain phy addresses or probing doesn't return
0xffff when nothing is found at the address. A new driver I'm
working on also makes use of this mask.

Signed-off-by: Matt Porter 
Signed-off-by: Jeff Garzik

Merge ../bleed-2.6

2005-10-28T17:13:16+00:00

[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks

2005-10-28T16:52:56+00:00

In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King 
Signed-off-by: Greg Kroah-Hartman

[netdrvr] delete CONFIG_PHYCONTROL

2005-09-24T02:58:49+00:00

[PATCH] Kconfig fix (PHYLIB vs. s390)

2005-09-05T22:12:08+00:00

drivers/net/phy/phy.c is broken on s390; it uses enable_irq() and friends
and these do not exist on s390.  Marked as broken for now.

Signed-off-by: Al Viro 
Signed-off-by: Jeff Garzik

[PATCH] 'mdio_bus_exit' in discarded section .text.exit

2005-09-05T22:04:19+00:00

When building with  CONFIG_PHYLIB=y on Itanium, I see:
 `mdio_bus_exit' referenced in section `.init.text' of
drivers/built-in.o: defined in discarded section `.exit.text' of
drivers/built-in.o

I believe that mdio_bus_exit should not be declared __exit, because it is
referencesd from __init sections in, say, phy_init().

Signed-off-by: Peter Chubb 
Signed-off-by: Andrew Morton 
Signed-off-by: Jeff Garzik

[PATCH] swsusp: fix remaining u32 vs. pm_message_t confusion

2005-09-05T07:06:15+00:00

Fix remaining bits of u32 vs.  pm_message confusion.  Should not break
anything.

Signed-off-by: Pavel Machek 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] PHY Layer fixup

2005-08-29T00:28:25+00:00

This patch adds back the code that was taken out, thus re-enabling:

* The PHY Layer to initialize without crashing
* Drivers to actually connect to PHYs
* The entire PHY Control Layer

This patch is used by the gianfar driver, and other drivers which are in
development.

Signed-off-by: Andy Fleming 
Signed-off-by: Jeff Garzik