linux.git/drivers/net/phy/lxt.c, branch v5.3

net: phy: lxt: Add suspend/resume support to LXT971 and LXT973.

2019-05-23T16:19:21+00:00

All LXT PHYs implement the standard "power down" bit 11 of
BMCR, so this patch adds support using the generic
genphy_{suspend,resume} functions added by
commit 0f0ca340e57b ("phy: power management support").

LXT970 is left aside because all registers get cleared upon
"power down" exit.

Reviewed-by: Heiner Kallweit 
Signed-off-by: Christophe Leroy 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: switch drivers to use dynamic feature detection

2019-04-16T00:19:54+00:00

Recently genphy_read_abilities() has been added that dynamically detects
clause 22 PHY abilities. I *think* this detection should work with all
supported PHY's, at least for the ones with basic features sets, i.e.
PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
features explicitly and rely on phylib feature detection.

I don't have access to most of these PHY's, therefore I'd appreciate
regression testing.

v2:
- make the feature constant a comment so that readers know which
  features are supported by the respective PHY

Signed-off-by: Heiner Kallweit 
Tested-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: Convert some PHY and MDIO driver files to SPDX headers

2019-01-23T04:53:08+00:00

Where the license text and the MODULE_LICENSE() value agree, convert
to using an SPDX header, removing the license text.

Signed-off-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: Convert u32 phydev->lp_advertising to linkmode

2018-11-11T18:10:01+00:00

Convert phy drivers to report the link partner advertised modes using
a linkmode bitmap. This allows them to report the higher speeds which
don't fit in a u32.

Signed-off-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: remove flag PHY_HAS_INTERRUPT from driver configs

2018-11-11T17:36:56+00:00

Now that flag PHY_HAS_INTERRUPT has been replaced with a check for
callbacks config_intr and ack_interrupt, we can remove setting this
flag from all driver configs.
Last but not least remove flag PHY_HAS_INTERRUPT completely.

Signed-off-by: Heiner Kallweit 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: remove generic settings for callbacks config_aneg and read_status from drivers

2017-12-01T20:42:21+00:00

Remove generic settings for callbacks config_aneg and read_status
from drivers.

Signed-off-by: Heiner Kallweit 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: lxt: Export link partner advertising

2017-06-20T17:41:24+00:00

Provide link partner advertising information.
Removed testing for gigabit modes, which is useless for a fast ethernet phy.

Signed-off-by: Thomas Bogendoerfer 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*'
  sed -i -e "s!$PATT!#include !" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro 
Signed-off-by: Linus Torvalds

lxt: simplify lxt970_config_init()

2016-05-16T17:53:20+00:00

This function declares the 'err' local variable for no good reason, get rid
of it.

Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller

lxt: simplify lxt97[01]_config_intr()

2016-05-16T17:53:19+00:00

Both these functions declare the 'err' local variables for no good reason,
get rid of them.

Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller