linux.git/drivers/net/phy/lxt.c, branch v4.0

net: phy: replace phy_drivers_register calls

2014-11-12T18:52:53+00:00

Replace module init/exit which only calls phy_drivers_register with
module_phy_driver macro.

Tested using Micrel driver, and otherwise compile-tested only.

Signed-off-by: Johan Hovold 
Signed-off-by: David S. Miller

net: phy: lxt: fix checkpath errors

2013-12-18T05:49:02+00:00

checkpath spotted a few errors in this file, fix them.

Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller

Supject: phy: make local function static

2013-03-09T21:09:17+00:00

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

lxt PHY: Support for the buggy LXT973 rev A2

2012-09-27T21:58:06+00:00

This patch adds proper handling of the buggy revision A2 of LXT973 phy, adding
precautions linked to ERRATA Item 4:

Revision A2 of LXT973 chip randomly returns the contents of the previous even
register when you read a odd register regularly

Signed-off-by: Christophe Leroy 
Acked-by: Richard Cochran 
Signed-off-by: David S. Miller

phylib: Support registering a bunch of drivers

2012-07-09T07:10:56+00:00

If registering of one of them fails, all already registered drivers
of this module will be unregistered.

Use the new register/unregister functions in all drivers
registering more than one driver.

amd.c, realtek.c: Simplify: directly return registration result.

Tested with broadcom.c
All others compile-tested.

Signed-off-by: Christian Hohnstaedt 
Signed-off-by: David S. Miller

net/phy: fix many "defined but unused" warnings

2010-10-05T07:34:29+00:00

MODULE_DEVICE_TABLE only expands to something if it's compiled
for a module.  So when building-in support for the phys, the
mdio_device_id tables are unused.  Marking them with __maybe_unused
fixes the following warnings:

	drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used
	drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used
	drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used
	drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used
	drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used
	drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used
	drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used
	drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used
	drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used
	drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used
	drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used
	drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used
	drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used
	drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used
	drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used

Signed-off-by: Uwe Kleine-König 
Signed-off-by: David S. Miller

phylib: Add autoload support for the LXT973 phy.

2010-06-27T05:12:03+00:00

Commit e13647c1 (phylib: Add support for the LXT973 phy.) added a new ID
but neglected to also add it to the MODULE_DEVICE_TABLE.

Signed-off-by: David Woodhouse 
Signed-off-by: David S. Miller

phylib: Add support for the LXT973 phy.

2010-06-09T23:17:02+00:00

This patch implements a work around for Erratum 5, "3.3 V Fiber Speed
Selection." If the hardware wiring does not respect this erratum, then
fiber optic mode will not work properly.

Signed-off-by: Richard Cochran 
Signed-off-by: David S. Miller

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

2010-04-11T21:53:53+00:00

Conflicts:
	drivers/net/stmmac/stmmac_main.c
	drivers/net/wireless/wl12xx/wl1271_cmd.c
	drivers/net/wireless/wl12xx/wl1271_main.c
	drivers/net/wireless/wl12xx/wl1271_spi.c
	net/core/ethtool.c
	net/mac80211/scan.c

phylib: Add module table to all existing phy drivers

2010-04-02T21:30:40+00:00

Signed-off-by: David Woodhouse 
Signed-off-by: David S. Miller