linux.git/drivers/net/phy/Kconfig, branch v4.18 Linux kernel source tree net: phy: Allow MDIO_MOXART and MDIO_SUN4I with COMPILE_TEST 2018-05-17T21:11:06+00:00 Florian Fainelli f.fainelli@gmail.com 2018-05-17T20:07:45+00:00 3c0596f8bec016210e9f470411f70a1a8ea41bcd Those drivers build just fine with COMPILE_TEST, so make that possible. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Those drivers build just fine with COMPILE_TEST, so make that possible.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: mscc-miim: Add MDIO driver 2018-05-15T20:41:15+00:00 Alexandre Belloni alexandre.belloni@bootlin.com 2018-05-14T20:04:55+00:00 542671fe4d86ad42b132d8814b6847ee1414aba6 Add a driver for the Microsemi MII Management controller (MIIM) found on Microsemi SoCs. On Ocelot, there are two controllers, one is connected to the internal PHYs, the other one can communicate with external PHYs. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add a driver for the Microsemi MII Management controller (MIIM) found on
Microsemi SoCs.
On Ocelot, there are two controllers, one is connected to the internal
PHYs, the other one can communicate with external PHYs.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: DP83TC811: Introduce support for the DP83TC811 phy 2018-05-11T20:36:04+00:00 Dan Murphy dmurphy@ti.com 2018-05-11T18:08:19+00:00 b753a9faaf9aef1338c28ebd9ace6d749428788b Add support for the DP83811 phy. The DP83811 supports both rgmii and sgmii interfaces. There are 2 part numbers for this the DP83TC811R does not reliably support the SGMII interface but the DP83TC811S will. There is not a way to differentiate these parts from the hardware or register set. So this is controlled via the DT to indicate which phy mode is required. Or the part can be strapped to a certain interface. Data sheet can be found here: http://www.ti.com/product/DP83TC811S-Q1/description http://www.ti.com/product/DP83TC811R-Q1/description Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add support for the DP83811 phy.

The DP83811 supports both rgmii and sgmii interfaces.
There are 2 part numbers for this the DP83TC811R does not
reliably support the SGMII interface but the DP83TC811S will.

There is not a way to differentiate these parts from the
hardware or register set.  So this is controlled via the DT
to indicate which phy mode is required.  Or the part can be
strapped to a certain interface.

Data sheet can be found here:
http://www.ti.com/product/DP83TC811S-Q1/description
http://www.ti.com/product/DP83TC811R-Q1/description

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
microchip_t1: Add driver for Microchip LAN87XX T1 PHYs 2018-05-10T18:16:36+00:00 Nisar Sayed Nisar.Sayed@microchip.com 2018-05-02T15:39:17+00:00 3e50d2da5850dd126b3e6a6e4387620d55b71db4 Add driver for Microchip LAN87XX T1 PHYs This patch support driver for Microchp T1 PHYs. There will be followup patches to this driver to support T1 PHY features such as cable diagnostics, signal quality indicator(SQI), sleep and wakeup (TC10) support. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add driver for Microchip LAN87XX T1 PHYs

This patch support driver for Microchp T1 PHYs.
There will be followup patches to this driver to support T1 PHY
features such as cable diagnostics, signal quality indicator(SQI),
sleep and wakeup (TC10) support.

Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: Fix modular PHYLIB build 2018-04-28T20:48:04+00:00 Florian Fainelli f.fainelli@gmail.com 2018-04-27T19:41:49+00:00 9e8d438e8ba43a38def2890a65a26917f2233a83 After commit c59530d0d5dc ("net: Move PHY statistics code into PHY library helpers") we made net/core/ethtool.c reference symbols which are part of the library which can be modular. David introduced a temporary fix with 1ecd6e8ad996 ("phy: Temporary build fix after phylib changes.") which would prevent such modularity. This is not desireable of course, so instead, just inline the functions into include/linux/phy.h to keep both options available. Fixes: c59530d0d5dc ("net: Move PHY statistics code into PHY library helpers") Fixes: 1ecd6e8ad996 ("phy: Temporary build fix after phylib changes.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
After commit c59530d0d5dc ("net: Move PHY statistics code into PHY
library helpers") we made net/core/ethtool.c reference symbols which are
part of the library which can be modular. David introduced a temporary
fix with 1ecd6e8ad996 ("phy: Temporary build fix after phylib changes.")
which would prevent such modularity.

This is not desireable of course, so instead, just inline the functions
into include/linux/phy.h to keep both options available.

Fixes: c59530d0d5dc ("net: Move PHY statistics code into PHY library helpers")
Fixes: 1ecd6e8ad996 ("phy: Temporary build fix after phylib changes.")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
phy: Temporary build fix after phylib changes. 2018-04-27T17:11:25+00:00 David S. Miller davem@davemloft.net 2018-04-27T17:11:25+00:00 1ecd6e8ad9964273d2b540196784bc3c9b17053b Make PHYLIB boolean, because we reference phylib provided symbols now from net/core/ethtool.c and therefore 'm' doesn't work. Signed-off-by: David S. Miller <davem@davemloft.net> 
Make PHYLIB boolean, because we reference phylib provided symbols now
from net/core/ethtool.c and therefore 'm' doesn't work.

Signed-off-by: David S. Miller <davem@davemloft.net>
net-next: phy: new Asix Electronics PHY driver 2018-04-19T20:11:10+00:00 Michael Schmitz schmitzmic@gmail.com 2018-04-19T02:05:18+00:00 31dd83b966410915a56358a8a3fc13c54d016fb3 The Asix Electronics PHY found on the X-Surf 100 Amiga Zorro network card by Individual Computers is buggy, and needs the reset bit toggled as workaround to make a PHY soft reset succeed. Add workaround driver just for this special case. Suggested in xsurf100 patch series review by Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The Asix Electronics PHY found on the X-Surf 100 Amiga Zorro network
card by Individual Computers is buggy, and needs the reset bit toggled
as workaround to make a PHY soft reset succeed.

Add workaround driver just for this special case.

Suggested in xsurf100 patch series review by Andrew Lunn <andrew@lunn.ch>

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: leds: Add support for "link" trigger 2017-11-08T01:24:14+00:00 Maciej S. Szmigiero mail@maciej.szmigiero.name 2017-11-01T23:49:18+00:00 3928ee6485a316c8abde7e24c7f82033a1c8d3ae Currently, we create a LED trigger for any link speed known to a PHY. These triggers only fire when their exact link speed had been negotiated (they aren't cumulative, that is, they don't fire for "their or any higher" link speed). What we are missing, however, is a trigger which will fire on any link speed known to the PHY. Such trigger can then be used for implementing a poor man's substitute of the "link" LED on boards that lack it. Let's add it. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: David S. Miller <davem@davemloft.net> 
Currently, we create a LED trigger for any link speed known to a PHY.
These triggers only fire when their exact link speed had been negotiated
(they aren't cumulative, that is, they don't fire for "their or any higher"
link speed).

What we are missing, however, is a trigger which will fire on any link
speed known to the PHY. Such trigger can then be used for implementing a
poor man's substitute of the "link" LED on boards that lack it.
Let's add it.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: DP83822 initial driver submission 2017-10-11T21:14:32+00:00 Dan Murphy dmurphy@ti.com 2017-10-10T17:42:55+00:00 87461f7a58ab694e638ac52afa543b427751a9d0 Add support for the TI DP83822 10/100Mbit ethernet phy. The DP83822 provides flexibility to connect to a MAC through a standard MII, RMII or RGMII interface. In addition the DP83822 needs to be removed from the DP83848 driver as the WoL support is added here for this device. Datasheet: http://www.ti.com/product/DP83822I/datasheet Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add support for the TI  DP83822 10/100Mbit ethernet phy.

The DP83822 provides flexibility to connect to a MAC through a
standard MII, RMII or RGMII interface.

In addition the DP83822 needs to be removed from the DP83848 driver
as the WoL support is added here for this device.

Datasheet:
http://www.ti.com/product/DP83822I/datasheet

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a driver for Renesas uPD60620 and uPD60620A PHYs 2017-10-10T03:49:36+00:00 Bernd Edlinger bernd.edlinger@hotmail.de 2017-10-08T13:40:08+00:00 812b5ca7d376e7e008ac0c897d1ef94eb05ddc3b Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: David S. Miller <davem@davemloft.net>