linux.git/drivers/net/pasemi_mac.h, branch master

pasemic_mac*: Move the PA Semi driver

2011-08-11T23:28:47+00:00

Move the PA Semi driver into drivers/net/ethernet/pasemi/ and
make the necessary Kconfig and Makefile changes.

CC: Olof Johansson 
Signed-off-by: Jeff Kirsher 
Acked-by: Olof Johansson

net: Rework pasemi_mac driver to use of_mdio infrastructure

2009-04-27T09:53:49+00:00

This patch simplifies the driver by making use of more common code.

Signed-off-by: Grant Likely 
Tested-by: Olof Johansson 
Acked-by: Olof Johansson 
Acked-by: Andy Fleming 
Signed-off-by: David S. Miller

pasemi_mac: basic ethtool support

2008-03-05T22:34:41+00:00

First cut at ethtool support, to be completed over time.

Signed-off-by: Olof Johansson 
Acked-by: Jeff Garzik

pasemi_mac: jumbo frame support

2008-03-05T22:34:39+00:00

First cut at jumbo frame support. To support large MTU, one or several
separate channels must be allocated to calculate the TCP/UDP checksum
separately, since the mac lacks enough buffers to hold a whole packet
while it's being calculated.

Furthermore, it seems that a single function channel is not quite
enough to feed one of the 10Gig links, so allocate two channels for
XAUI interfaces.

Signed-off-by: Olof Johansson 
Acked-by: Jeff Garzik

pasemi_mac: add support for setting MTU

2008-02-03T12:27:54+00:00

Currently keeping it at 1500 bytes or below since jumbo frames need
special checksum offload on TX.

Signed-off-by: Olof Johansson 
Signed-off-by: Jeff Garzik 
Signed-off-by: David S. Miller

pasemi_mac: Add support for changing mac address

2008-02-03T12:27:53+00:00

Straightforward. It used to be hardcoded and impossible to override
with ifconfig.

Signed-off-by: Olof Johansson 
Signed-off-by: Jeff Garzik 
Signed-off-by: David S. Miller

pasemi_mac: Software-based LRO support

2008-01-28T23:04:24+00:00

pasemi_mac: Software-based LRO support

Implement LRO for pasemi_mac. Pretty straightforward.

Signed-off-by: Olof Johansson 
Signed-off-by: Jeff Garzik

pasemi_mac: Fix TX cleaning

2008-01-28T23:04:23+00:00

pasemi_mac: Fix TX cleaning

This is a bit awkward. We don't have a timer-delayed interrupt on TX
complete, but we have a count threshold. So set that reasonably high
(32 packets), and schedule the NAPI poll when it goes off. Also bump a
regular timer that will take care of rotting packets for the last 1..31
ones in case we don't trigger a TX interrupt (and there's no RX activity
that would otherwise trigger the poll).

The longer-term fix is to separate TX from RX NAPI and do two separate
poll loops.

Signed-off-by: Olof Johansson 
Signed-off-by: Jeff Garzik

pasemi_mac: Convert to new dma library

2008-01-28T23:04:21+00:00

pasemi_mac: Convert to new dma library

Convert the pasemi_mac driver to the new platform global DMA manaagement
library. This also does a couple of other minor cleanups w.r.t. channel
management.

Signed-off-by: Olof Johansson 
Signed-off-by: Jeff Garzik

pasemi_mac: Move register definitions to include/asm-powerpc

2008-01-28T23:04:20+00:00

pasemi_mac: Move register definitions to include/asm-powerpc

Move the common register formats and descriptor layouts from
drivers/net/pasemi_mac.h to include/asm-poewrpc/pasemi_dma.h

Previously only the ethernet driver was using them, but other drivers
are coming up that will also use them, so it makes sense to share the
constants.

Signed-off-by: Olof Johansson 
Signed-off-by: Jeff Garzik