linux.git/drivers/net/macsec.c, branch v6.0-rc2

macsec: Fix traffic counters/statistics

2022-08-10T12:45:06+00:00

OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and
InOctetsDecrypted were incrementing by the total number of octets in frames
instead of by the number of octets of User Data in frames.

The Controlled Port statistics ifOutOctets and ifInOctets were incrementing
by the total number of octets instead of the number of octets of the MSDUs
plus octets of the destination and source MAC addresses.

The Controlled Port statistics ifInDiscards and ifInErrors were not
incrementing each time the counters they aggregate were.

The Controlled Port statistic ifInErrors was not included in the output of
macsec_get_stats64 so the value was not present in ip commands output.

The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA
were not incrementing.

Signed-off-by: Clayton Yager 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-07-29T01:21:16+00:00

No conflicts.

Signed-off-by: Jakub Kicinski

net: macsec: fix potential resource leak in macsec_add_rxsa() and macsec_add_txsa()

2022-07-25T10:51:05+00:00

init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa->
key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error
occurs after init_rx_sa() is called in macsec_add_rxsa(), the function
released rx_sa with kfree() without releasing rx_sa->stats and rx_sa->
key.tfm, which will lead to a resource leak.

We should call macsec_rxsa_put() instead of kfree() to decrease the ref
count of rx_sa and release the relevant resource if the refcount is 0.
The same bug exists in macsec_add_txsa() for tx_sa as well. This patch
fixes the above two bugs.

Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Jianglei Nie 
Signed-off-by: David S. Miller

macsec: always read MACSEC_SA_ATTR_PN as a u64

2022-07-25T10:49:25+00:00

Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a
u32, sometimes forced into a u64 without checking the actual length of
the attribute. Instead, we can use nla_get_u64 everywhere, which will
read up to 64 bits into a u64, capped by the actual length of the
attribute coming from userspace.

This fixes several issues:
 - the check in validate_add_rxsa doesn't work with 32-bit attributes
 - the checks in validate_add_txsa and validate_upd_sa incorrectly
   reject X << 32 (with X != 0)

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

macsec: limit replay window size with XPN

2022-07-25T10:49:25+00:00

IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value
of the replay window is 2^30-1, to help with recovery of the upper
bits of the PN.

To avoid leaving the existing macsec device in an inconsistent state
if this test fails during changelink, reuse the cleanup mechanism
introduced for HW offload. This wasn't needed until now because
macsec_changelink_common could not fail during changelink, as
modifying the cipher suite was not allowed.

Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so
that secy->xpn is set.

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

macsec: fix error message in macsec_add_rxsa and _txsa

2022-07-25T10:49:25+00:00

The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT.

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

macsec: fix NULL deref in macsec_add_rxsa

2022-07-25T10:49:25+00:00

Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but
nothing guarantees that it's not NULL at this point. The same code was
added to macsec_add_txsa, but there it's not a problem because
validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is
present.

Note: it's not possible to reproduce with iproute, because iproute
doesn't allow creating an SA without specifying the PN.

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315
Reported-by: Frantisek Sumsal 
Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

net: adopt u64_stats_t in struct pcpu_sw_netstats

2022-06-10T04:53:11+00:00

As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.

Signed-off-by: Eric Dumazet 
Signed-off-by: Jakub Kicinski

net: rename reference+tracking helpers

2022-06-10T04:52:55+00:00

Netdev reference helpers have a dev_ prefix for historic
reasons. Renaming the old helpers would be too much churn
but we can rename the tracking ones which are relatively
recent and should be the default for new code.

Rename:
 dev_hold_track()    -> netdev_hold()
 dev_put_track()     -> netdev_put()
 dev_replace_track() -> netdev_ref_replace()

Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski

macsec: fix UAF bug for real_dev

2022-06-01T10:01:47+00:00

Create a new macsec device but not get reference to real_dev. That can
not ensure that real_dev is freed after macsec. That will trigger the
UAF bug for real_dev as following:

==================================================================
BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662
Call Trace:
 ...
 macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662
 dev_get_iflink+0x73/0xe0 net/core/dev.c:637
 default_operstate net/core/link_watch.c:42 [inline]
 rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54
 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161

Allocated by task 22209:
 ...
 alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549
 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235
 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748

Freed by task 8:
 ...
 kfree+0xd6/0x4d0 mm/slub.c:4552
 kvfree+0x42/0x50 mm/util.c:615
 device_release+0x9f/0x240 drivers/base/core.c:2229
 kobject_cleanup lib/kobject.c:673 [inline]
 kobject_release lib/kobject.c:704 [inline]
 kref_put include/linux/kref.h:65 [inline]
 kobject_put+0x1c8/0x540 lib/kobject.c:721
 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327

After commit faab39f63c1f ("net: allow out-of-order netdev unregistration")
and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we
can add dev_hold_track() in macsec_dev_init() and dev_put_track() in
macsec_free_netdev() to fix the problem.

Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine")
Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan 
Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni