linux.git/drivers/net/ipvlan/ipvlan_core.c, branch v6.5

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-06-27T16:45:22+00:00

Merge in late fixes to prepare for the 6.5 net-next PR.

Signed-off-by: Jakub Kicinski

ipvlan: Fix return value of ipvlan_queue_xmit()

2023-06-27T09:44:46+00:00

ipvlan_queue_xmit() should return NET_XMIT_XXX, but
ipvlan_xmit_mode_l2/l3() returns rx_handler_result_t or NET_RX_XXX
in some cases. ipvlan_rcv_frame() will only return RX_HANDLER_CONSUMED
in ipvlan_xmit_mode_l2/l3() because 'local' is true. It's equal to
NET_XMIT_SUCCESS. But dev_forward_skb() can return NET_RX_SUCCESS or
NET_RX_DROP, and returning NET_RX_DROP(NET_XMIT_DROP) will increase
both ipvlan and ipvlan->phy_dev drops counter.

The skb to forward can be treated as xmitted successfully. This patch
makes ipvlan_queue_xmit() return NET_XMIT_SUCCESS for forward skb.

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Cambda Zhu 
Link: https://lore.kernel.org/r/20230626093347.7492-1-cambda@linux.alibaba.com
Signed-off-by: Paolo Abeni

ipvlan: Remove NULL check before dev_{put, hold}

2023-05-12T07:56:57+00:00

The call netdev_{put, hold} of dev_{put, hold} will check NULL,
so there is no need to check before using dev_{put, hold},
remove it to silence the warning:

./drivers/net/ipvlan/ipvlan_core.c:559:3-11: WARNING: NULL check before dev_{put, hold} functions is not needed.

Reported-by: Abaci Robot 
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4930
Signed-off-by: Yang Li 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

ipvlan:Fix out-of-bounds caused by unclear skb->cb

2023-05-10T09:33:06+00:00

If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which
is actually skb->cb, and IPCB(skb_in)->opt will be used in
__ip_options_echo. It is possible that memcpy is out of bounds and lead
to stack overflow.
We should clear skb->cb before ip_local_out or ip6_local_out.

v2:
1. clean the stack info
2. use IPCB/IP6CB instead of skb->cb

crash on stable-5.10(reproduce in kasan kernel).
Stack info:
[ 2203.651571] BUG: KASAN: stack-out-of-bounds in
__ip_options_echo+0x589/0x800
[ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task
swapper/3/0
[ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted
5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1
[ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014
[ 2203.655475] Call Trace:
[ 2203.655481]  
[ 2203.655501]  dump_stack+0x9c/0xd3
[ 2203.655514]  print_address_description.constprop.0+0x19/0x170
[ 2203.655530]  __kasan_report.cold+0x6c/0x84
[ 2203.655586]  kasan_report+0x3a/0x50
[ 2203.655594]  check_memory_region+0xfd/0x1f0
[ 2203.655601]  memcpy+0x39/0x60
[ 2203.655608]  __ip_options_echo+0x589/0x800
[ 2203.655654]  __icmp_send+0x59a/0x960
[ 2203.655755]  nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4]
[ 2203.655763]  reject_tg+0x77/0x1bf [ipt_REJECT]
[ 2203.655772]  ipt_do_table+0x691/0xa40 [ip_tables]
[ 2203.655821]  nf_hook_slow+0x69/0x100
[ 2203.655828]  __ip_local_out+0x21e/0x2b0
[ 2203.655857]  ip_local_out+0x28/0x90
[ 2203.655868]  ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan]
[ 2203.655931]  ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan]
[ 2203.655967]  ipvlan_queue_xmit+0xb3/0x190 [ipvlan]
[ 2203.655977]  ipvlan_start_xmit+0x2e/0xb0 [ipvlan]
[ 2203.655984]  xmit_one.constprop.0+0xe1/0x280
[ 2203.655992]  dev_hard_start_xmit+0x62/0x100
[ 2203.656000]  sch_direct_xmit+0x215/0x640
[ 2203.656028]  __qdisc_run+0x153/0x1f0
[ 2203.656069]  __dev_queue_xmit+0x77f/0x1030
[ 2203.656173]  ip_finish_output2+0x59b/0xc20
[ 2203.656244]  __ip_finish_output.part.0+0x318/0x3d0
[ 2203.656312]  ip_finish_output+0x168/0x190
[ 2203.656320]  ip_output+0x12d/0x220
[ 2203.656357]  __ip_queue_xmit+0x392/0x880
[ 2203.656380]  __tcp_transmit_skb+0x1088/0x11c0
[ 2203.656436]  __tcp_retransmit_skb+0x475/0xa30
[ 2203.656505]  tcp_retransmit_skb+0x2d/0x190
[ 2203.656512]  tcp_retransmit_timer+0x3af/0x9a0
[ 2203.656519]  tcp_write_timer_handler+0x3ba/0x510
[ 2203.656529]  tcp_write_timer+0x55/0x180
[ 2203.656542]  call_timer_fn+0x3f/0x1d0
[ 2203.656555]  expire_timers+0x160/0x200
[ 2203.656562]  run_timer_softirq+0x1f4/0x480
[ 2203.656606]  __do_softirq+0xfd/0x402
[ 2203.656613]  asm_call_irq_on_stack+0x12/0x20
[ 2203.656617]  
[ 2203.656623]  do_softirq_own_stack+0x37/0x50
[ 2203.656631]  irq_exit_rcu+0x134/0x1a0
[ 2203.656639]  sysvec_apic_timer_interrupt+0x36/0x80
[ 2203.656646]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 2203.656654] RIP: 0010:default_idle+0x13/0x20
[ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc
cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb
f4  cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08
[ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256
[ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX:
ffffffffaf290191
[ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI:
ffff88811a3c4f60
[ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09:
ffff88811a3c4f63
[ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12:
0000000000000003
[ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15:
0000000000000000
[ 2203.656729]  default_idle_call+0x5a/0x150
[ 2203.656735]  cpuidle_idle_call+0x1c6/0x220
[ 2203.656780]  do_idle+0xab/0x100
[ 2203.656786]  cpu_startup_entry+0x19/0x20
[ 2203.656793]  secondary_startup_64_no_verify+0xc2/0xcb

[ 2203.657409] The buggy address belongs to the page:
[ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0x11a388
[ 2203.658665] flags:
0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff)
[ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208
0000000000000000
[ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
[ 2203.658686] page dumped because: kasan: bad access detected

To reproduce(ipvlan with IPVLAN_MODE_L3):
Env setting:
=======================================================
modprobe ipvlan ipvlan_default_mode=1
sysctl net.ipv4.conf.eth0.forwarding=1
iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j
MASQUERADE
ip link add gw link eth0 type ipvlan
ip -4 addr add 20.0.0.254/24 dev gw
ip netns add net1
ip link add ipv1 link eth0 type ipvlan
ip link set ipv1 netns net1
ip netns exec net1 ip link set ipv1 up
ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1
ip netns exec net1 route add default gw 20.0.0.254
ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10%
ifconfig gw up
iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with
icmp-port-unreachable
=======================================================
And then excute the shell(curl any address of eth0 can reach):

for((i=1;i<=100000;i++))
do
        ip netns exec net1 curl x.x.x.x:8888
done
=======================================================

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: "t.feng" 
Suggested-by: Florian Westphal 
Reviewed-by: Paolo Abeni 
Signed-off-by: David S. Miller

ipvlan: use skb_ip_totlen in ipvlan_get_L3_hdr

2023-02-02T04:54:27+00:00

ipvlan devices calls netif_inherit_tso_max() to get the tso_max_size/segs
from the lower device, so when lower device supports BIG TCP, the ipvlan
devices support it too. We also should consider its iph tot_len accessing.

Signed-off-by: Xin Long 
Reviewed-by: Eric Dumazet 
Signed-off-by: Jakub Kicinski

ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header

2022-09-09T11:46:06+00:00

If an AF_PACKET socket is used to send packets through ipvlan and the
default xmit function of the AF_PACKET socket is changed from
dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option
name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and
remains as the initial value of 65535, this may trigger slab-out-of-bounds
bugs as following:

=================================================================
UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6
ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33
all Trace:
print_address_description.constprop.0+0x1d/0x160
print_report.cold+0x4f/0x112
kasan_report+0xa3/0x130
ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
ipvlan_start_xmit+0x29/0xa0 [ipvlan]
__dev_direct_xmit+0x2e2/0x380
packet_direct_xmit+0x22/0x60
packet_snd+0x7c9/0xc40
sock_sendmsg+0x9a/0xa0
__sys_sendto+0x18a/0x230
__x64_sys_sendto+0x74/0x90
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is:
  1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW
     and skb->protocol is not specified as in packet_parse_headers()

  2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit()

In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is
called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which
use "skb->head + skb->mac_header", out-of-bound access occurs.

This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2()
and reset mac header in multicast to solve this out-of-bound bug.

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Lu Wei 
Reviewed-by: Eric Dumazet 
Signed-off-by: David S. Miller

ipvlan: adopt u64_stats_t

2022-06-10T04:53:10+00:00

As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.

Add READ_ONCE() when reading rx_errs & tx_drps.

Signed-off-by: Eric Dumazet 
Signed-off-by: Jakub Kicinski

net: add per-cpu storage and net->core_stats

2022-03-12T07:17:24+00:00

Before adding yet another possibly contended atomic_long_t,
it is time to add per-cpu storage for existing ones:
 dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler

Because many devices do not have to increment such counters,
allocate the per-cpu storage on demand, so that dev_get_stats()
does not have to spend considerable time folding zero counters.

Note that some drivers have abused these counters which
were supposed to be only used by core networking stack.

v4: should use per_cpu_ptr() in dev_get_stats() (Jakub)
v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo)
v2: add a missing include (reported by kernel test robot )
    Change in netdev_core_stats_alloc() (Jakub)

Signed-off-by: Eric Dumazet 
Cc: jeffreyji 
Reviewed-by: Brian Vazquez 
Reviewed-by: Jakub Kicinski 
Acked-by: Paolo Abeni 
Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski

ipvlan: Remove redundant if statements

2021-12-02T13:07:38+00:00

The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.

Signed-off-by: Xu Wang 
Signed-off-by: David S. Miller

ipvlan: remove h from printk format specifier

2021-01-29T01:47:33+00:00

This change fixes the checkpatch warning described in this commit
commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of
  unnecessary %h[xudi] and %hh[xudi]")

Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].

Cleanup output to use __func__ over explicit function strings.

Signed-off-by: Tom Rix 
Link: https://lore.kernel.org/r/20210124190804.1964580-1-trix@redhat.com
Signed-off-by: Jakub Kicinski