I noticed that only 3 out of the 4 input bits were used,
mt.key->flags & FLOW_DIS_IS_FRAGMENT was never checked.
In order to avoid a complicated maze, I converted it to
use a 16 byte mapping table.
As shown in the table below the old heuristics doesn't
always do the right thing, ie. when FLOW_DIS_IS_FRAGMENT=1/1
then it used to only match follow-up fragment packets.
Here are all the combinations, and their resulting new/old
VCAP key/mask filter:
/- FLOW_DIS_IS_FRAGMENT (key/mask)
| /- FLOW_DIS_FIRST_FRAG (key/mask)
| | /-- new VCAP fragment (key/mask)
v v v v- old VCAP fragment (key/mask)
0/0 0/0 -/- -/- impossible (due to entry cond. on mask)
0/0 0/1 -/- 0/3 !! invalid (can't match non-fragment + follow-up frag)
0/0 1/0 -/- -/- impossible (key > mask)
0/0 1/1 1/3 1/3 first fragment
0/1 0/0 0/3 3/3 !! not fragmented
0/1 0/1 0/3 3/3 !! not fragmented (+ not first fragment)
0/1 1/0 -/- -/- impossible (key > mask)
0/1 1/1 -/- 1/3 !! invalid (non-fragment and first frag)
1/0 0/0 -/- -/- impossible (key > mask)
1/0 0/1 -/- -/- impossible (key > mask)
1/0 1/0 -/- -/- impossible (key > mask)
1/0 1/1 -/- -/- impossible (key > mask)
1/1 0/0 1/1 3/3 !! some fragment
1/1 0/1 3/3 3/3 follow-up fragment
1/1 1/0 -/- -/- impossible (key > mask)
1/1 1/1 1/3 1/3 first fragment
In the datasheet the VCAP fragment values are documented as:
0 = no fragment
1 = initial fragment
2 = suspicious fragment
3 = valid follow-up fragment
Result: 3 combinations match the old behavior,
3 combinations have been corrected,
2 combinations are now invalid, and fail,
8 combinations are impossible.
It should now be aligned with how FLOW_DIS_IS_FRAGMENT
and FLOW_DIS_FIRST_FRAG is set in __skb_flow_dissect() in
net/core/flow_dissector.c
Since the VCAP fragment values are not a bitfield, we have
to ignore the suspicious fragment value, eg. when matching
on any kind of fragment with FLOW_DIS_IS_FRAGMENT=1/1.
Only compile tested, and logic tested in userspace, as I
unfortunately don't have access to this switch chip (yet).
Fixes: d6c2964db3fe ("net: microchip: sparx5: Adding more tc flower keys for the IS2 VCAP")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240411111321.114095-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The wrong port config is being used if the PCS is reconfigured. Fix this
by correctly using the new config instead of the old one.
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409-link-mode-reconfiguration-fix-v2-1-db6a507f3627@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PCI11x1x Rev B0 devices might drop packets when receiving back to back frames
at 2.5G link speed. Change the B0 Rev device's Receive filtering Engine FIFO
threshold parameter from its hardware default of 4 to 3 dwords to prevent the
problem. Rev C0 and later hardware already defaults to 3 dwords.
Fixes: bb4f6bffe33c ("net: lan743x: Add PCI11010 / PCI11414 device IDs")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326065805.686128-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Based on the static analyzis of the code it looks like when an entry
from the MAC table was removed, the entry was still used after being
freed. More precise the vid of the mac_entry was used after calling
devm_kfree on the mac_entry.
The fix consists in first using the vid of the mac_entry to delete the
entry from the HW and after that to free it.
Fixes: b37a1bae742f ("net: sparx5: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240301080608.3053468-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a spelling mistake in a netif_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240220091737.2676984-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/udp.c
f796feabb9f5 ("udp: add local "peek offset enabled" flag")
56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")
Adjacent changes:
net/unix/garbage.c
aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
11498715f266 ("af_unix: Remove io_uring code for GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both registers used when doing manual injection or fdma injection are
shared between all the net devices of the switch. It was noticed that
when having two process which each of them trying to inject frames on
different ethernet ports, that the HW started to behave strange, by
sending out more frames then expected. When doing fdma injection it is
required to set the frame in the DCB and then make sure that the next
pointer of the last DCB is invalid. But because there is no locks for
this, then easily this pointer between the DCB can be broken and then it
would create a loop of DCBs. And that means that the HW will
continuously transmit these frames in a loop. Until the SW will break
this loop.
Therefore to fix this issue, add a spin lock for when accessing the
registers for manual or fdma injection.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/dev.c
9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()")
723de3ebef03 ("net: free altname using an RCU callback")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.")
drivers/net/ethernet/renesas/ravb_main.c
ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path"
)
c2da9408579d ("ravb: Add Rx checksum offload support for GbEth")
net/mptcp/protocol.c
bdd70eb68913 ("mptcp: drop the push_pending field")
28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a crash when adding one of the lan966x interfaces under a lag
interface. The issue can be reproduced like this:
ip link add name bond0 type bond miimon 100 mode balance-xor
ip link set dev eth0 master bond0
The reason is because when adding a interface under the lag it would go
through all the ports and try to figure out which other ports are under
that lag interface. And the issue is that lan966x can have ports that are
NULL pointer as they are not probed. So then iterating over these ports
it would just crash as they are NULL pointers.
The fix consists in actually checking for NULL pointers before accessing
something from the ports. Like we do in other places.
Fixes: cabc9d49333d ("net: lan966x: Add lag support for lan966x")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206123054.3052966-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>