linux.git/drivers/net/ethernet/microchip, branch v5.10

ethernet: select CONFIG_CRC32 as needed

2020-12-04T22:42:21+00:00

A number of ethernet drivers require crc32 functionality to be
avaialable in the kernel, causing a link error otherwise:

arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast':
et131x.c:(.text+0x5918): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit':
macb_main.c:(.text+0x4b88): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode':
ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list':
fec_main.c:(.text+0x6120): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address':
fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow
arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read':
nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire':
nfp_resource.c:(.text+0x144): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list':
lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do':
rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del':
rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb':
arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index':
dr_ste.c:(.text+0x354): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast':
lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le'

Add the missing 'select CRC32' entries in Kconfig for each of them.

Signed-off-by: Arnd Bergmann 
Acked-by: Nicolas Ferre 
Acked-by: Madalin Bucur 
Acked-by: Mark Einon 
Acked-by: Simon Horman 
Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski

lan743x: prevent entire kernel HANG on open, for some platforms

2020-11-14T23:25:12+00:00

On arm imx6, when opening the chip's netdev, the whole Linux
kernel intermittently hangs/freezes.

This is caused by a bug in the driver code which tests if pcie
interrupts are working correctly, using the software interrupt:

1. open: enable the software interrupt
2. open: tell the chip to assert the software interrupt
3. open: wait for flag
4. ISR: acknowledge s/w interrupt, set flag
5. open: notice flag, disable the s/w interrupt, continue

Unfortunately the ISR only acknowledges the s/w interrupt, but
does not disable it. This will re-trigger the ISR in a tight
loop.

On some (lucky) platforms, open proceeds to disable the s/w
interrupt even while the ISR is 'spinning'. On arm imx6,
the spinning ISR does not allow open to proceed, resulting
in a hung Linux kernel.

Fix minimally by disabling the s/w interrupt in the ISR, which
will prevent it from spinning. This won't break anything because
the s/w interrupt is used as a one-shot interrupt.

Note that this is a minimal fix, overlooking many possible
cleanups, e.g.:
- lan743x_intr_software_isr() is completely redundant and reads
  INT_STS twice for no apparent reason
- disabling the s/w interrupt in lan743x_intr_test_isr() is now
  redundant, but harmless
- waiting on software_isr_flag can be converted from a sleeping
  poll loop to wait_event_timeout()

Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Tested-by: Sven Van Asbroeck  # arm imx6 lan7430
Signed-off-by: Sven Van Asbroeck 
Link: https://lore.kernel.org/r/20201112204741.12375-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski

lan743x: fix issue causing intermittent kernel log warnings

2020-11-14T21:32:22+00:00

When running this chip on arm imx6, we intermittently observe
the following kernel warning in the log, especially when the
system is under high load:

[   50.119484] ------------[ cut here ]------------
[   50.124377] WARNING: CPU: 0 PID: 303 at kernel/softirq.c:169 __local_bh_enable_ip+0x100/0x184
[   50.132925] IRQs not enabled as expected
[   50.159250] CPU: 0 PID: 303 Comm: rngd Not tainted 5.7.8 #1
[   50.164837] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[   50.171395] [] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[   50.179162] [] (show_stack) from [] (dump_stack+0xac/0xd8)
[   50.186408] [] (dump_stack) from [] (__warn+0xd0/0x10c)
[   50.193391] [] (__warn) from [] (warn_slowpath_fmt+0x98/0xc4)
[   50.200892] [] (warn_slowpath_fmt) from [] (__local_bh_enable_ip+0x100/0x184)
[   50.209860] [] (__local_bh_enable_ip) from [] (destroy_conntrack+0x48/0xd8 [nf_conntrack])
[   50.220038] [] (destroy_conntrack [nf_conntrack]) from [] (nf_conntrack_destroy+0x94/0x168)
[   50.230160] [] (nf_conntrack_destroy) from [] (skb_release_head_state+0xa0/0xd0)
[   50.239314] [] (skb_release_head_state) from [] (skb_release_all+0xc/0x24)
[   50.247946] [] (skb_release_all) from [] (consume_skb+0x74/0x17c)
[   50.255796] [] (consume_skb) from [] (lan743x_tx_release_desc+0x120/0x124)
[   50.264428] [] (lan743x_tx_release_desc) from [] (lan743x_tx_napi_poll+0x5c/0x18c)
[   50.273755] [] (lan743x_tx_napi_poll) from [] (net_rx_action+0x118/0x4a4)
[   50.282306] [] (net_rx_action) from [] (__do_softirq+0x13c/0x53c)
[   50.290157] [] (__do_softirq) from [] (irq_exit+0x150/0x17c)
[   50.297575] [] (irq_exit) from [] (__handle_domain_irq+0x60/0xb0)
[   50.305423] [] (__handle_domain_irq) from [] (gic_handle_irq+0x4c/0x90)
[   50.313790] [] (gic_handle_irq) from [] (__irq_usr+0x54/0x80)
[   50.321287] Exception stack(0xecd99fb0 to 0xecd99ff8)
[   50.326355] 9fa0:                                     1cf1aa74 00000001 00000001 00000000
[   50.334547] 9fc0: 00000001 00000000 00000000 00000000 00000000 00000000 00004097 b6d17d14
[   50.342738] 9fe0: 00000001 b6d17c60 00000000 b6e71f94 800b0010 ffffffff
[   50.349364] irq event stamp: 2525027
[   50.352955] hardirqs last  enabled at (2525026): [] net_rx_action+0xb4/0x4a4
[   50.360892] hardirqs last disabled at (2525027): [] _raw_spin_lock_irqsave+0x1c/0x50
[   50.369517] softirqs last  enabled at (2524660): [] __do_softirq+0x38c/0x53c
[   50.377446] softirqs last disabled at (2524693): [] irq_exit+0x150/0x17c
[   50.385027] ---[ end trace c0b571db4bc8087d ]---

The driver is calling dev_kfree_skb() from code inside a spinlock,
where h/w interrupts are disabled. This is forbidden, as documented
in include/linux/netdevice.h. The correct function to use
dev_kfree_skb_irq(), or dev_kfree_skb_any().

Fix by using the correct dev_kfree_skb_xxx() functions:

in lan743x_tx_release_desc():
  called by lan743x_tx_release_completed_descriptors()
    called by in lan743x_tx_napi_poll()
    which holds a spinlock
  called by lan743x_tx_release_all_descriptors()
    called by lan743x_tx_close()
    which can-sleep
conclusion: use dev_kfree_skb_any()

in lan743x_tx_xmit_frame():
  which holds a spinlock
conclusion: use dev_kfree_skb_irq()

in lan743x_tx_close():
  which can-sleep
conclusion: use dev_kfree_skb()

in lan743x_rx_release_ring_element():
  called by lan743x_rx_close()
    which can-sleep
  called by lan743x_rx_open()
    which can-sleep
conclusion: use dev_kfree_skb()

Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Sven Van Asbroeck 
Link: https://lore.kernel.org/r/20201112185949.11315-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski

lan743x: fix use of uninitialized variable

2020-11-12T18:03:16+00:00

When no devicetree is present, the driver will use an
uninitialized variable.

Fix by initializing this variable.

Fixes: 902a66e08cea ("lan743x: correctly handle chips with internal PHY")
Reported-by: kernel test robot 
Signed-off-by: Sven Van Asbroeck 
Link: https://lore.kernel.org/r/20201112152513.1941-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski

lan743x: fix "BUG: invalid wait context" when setting rx mode

2020-11-11T01:52:54+00:00

In the net core, the struct net_device_ops -> ndo_set_rx_mode()
callback is called with the dev->addr_list_lock spinlock held.

However, this driver's ndo_set_rx_mode callback eventually calls
lan743x_dp_write(), which acquires a mutex. Mutex acquisition
may sleep, and this is not allowed when holding a spinlock.

Fix by removing the dp_lock mutex entirely. Its purpose is to
prevent concurrent accesses to the data port. No concurrent
accesses are possible, because the dev->addr_list_lock
spinlock in the core only lets through one thread at a time.

Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Sven Van Asbroeck 
Link: https://lore.kernel.org/r/20201109203828.5115-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski

lan743x: correctly handle chips with internal PHY

2020-11-10T23:46:52+00:00

Commit 6f197fb63850 ("lan743x: Added fixed link and RGMII support")
assumes that chips with an internal PHY will never have a devicetree
entry. This is incorrect: even for these chips, a devicetree entry
can be useful e.g. to pass the mac address from bootloader to chip:

    &pcie {
            status = "okay";

            host@0 {
                    reg = <0 0 0 0 0>;

                    #address-cells = <3>;
                    #size-cells = <2>;

                    lan7430: ethernet@0 {
                            /* LAN7430 with internal PHY */
                            compatible = "microchip,lan743x";
                            status = "okay";
                            reg = <0 0 0 0 0>;
                            /* filled in by bootloader */
                            local-mac-address = [00 00 00 00 00 00];
                    };
            };
    };

If a devicetree entry is present, the driver will not attach the chip
to its internal phy, and the chip will be non-operational.

Fix by tweaking the phy connection algorithm:
- first try to connect to a phy specified in the devicetree
  (could be 'real' phy, or just a 'fixed-link')
- if that doesn't succeed, try to connect to an internal phy, even
  if the chip has a devnode

Tested on a LAN7430 with internal PHY. I cannot test a device using
fixed-link, as I do not have access to one.

Fixes: 6f197fb63850 ("lan743x: Added fixed link and RGMII support")
Tested-by: Sven Van Asbroeck  # lan7430
Reviewed-by: Andrew Lunn 
Signed-off-by: Sven Van Asbroeck 
Link: https://lore.kernel.org/r/20201108171224.23829-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski

drivers/net/ethernet: clean up mis-targeted comments

2020-09-25T23:29:00+00:00

As part of the W=1 cleanups for ethernet, a million [*] driver
comments had to be cleaned up to get the W=1 compilation to
succeed. This change finally makes the drivers/net/ethernet tree
compile with W=1 set on the command line. NOTE: The kernel uses
kdoc style (see Documentation/process/kernel-doc.rst) when
documenting code, not doxygen or other styles.

After this patch the x86_64 build has no warnings from W=1, however
scripts/kernel-doc says there are 1545 more warnings in source files, that
I need to develop a script to fix in a followup patch.

The errors fixed here are all kdoc of a few classes, with a few outliers:
In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10:
drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=]
 1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff };
      |                  ^~~~~~~~~~~~~~
... repeats 4 times...
drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
 2084 |    RX_USED_ADD(page, i);
drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’:
drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable]
  603 |  u32 tbisr, tanar, tanlpar;
      |      ^~~~~
drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’:
drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable]
 1207 |  u32 cfg, tanar, tbicr;
      |           ^~~~~
drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable]
 1063 |   int data_size, yf_size;
      |                  ^~~~~~~

Normal kdoc fixes:
warning: Function parameter or member 'x' not described in 'y'
warning: Excess function parameter 'x' description in 'y'
warning: Cannot understand  on line  - I thought it was a doc line

[*] - ok it wasn't quite a million, but it felt like it.

Signed-off-by: Jesse Brandeburg 
Signed-off-by: David S. Miller

drivers/net/ethernet: clean up unused assignments

2020-09-25T23:29:00+00:00

As part of the W=1 compliation series, these lines all created
warnings about unused variables that were assigned a value. Most
of them are from register reads, but some are just picking up
a return value from a function and never doing anything with it.

Fixed warnings:
.../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable]
.../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable]
.../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
.../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable]
.../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable]
.../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs '
.../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable]
.../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable]
.../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
.../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable]
.../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable]
.../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable]
.../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable]
.../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable]
.../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable]
.../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]

The register reads should be OK, because the current
implementation of readl and friends will always execute even
without an lvalue.

When it makes sense, just remove the lvalue assignment and the
local. Other times, just remove the offending code, and
occasionally, just mark the variable as maybe unused since it
could be used in an ifdef or debug scenario.

Only compile tested with W=1.

Signed-off-by: Jesse Brandeburg 
Acked-by: Edward Cree 
Signed-off-by: David S. Miller

net: microchip: Make `lan743x_pm_suspend` function return right value

2020-09-23T18:45:44+00:00

drivers/net/ethernet/microchip/lan743x_main.c: In function lan743x_pm_suspend:

`ret` is set but not used. In fact, `pci_prepare_to_sleep` function value should
be the right value of `lan743x_pm_suspend` function, therefore, fix it.

Signed-off-by: Zheng Yongjun 
Signed-off-by: David S. Miller

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva