linux.git/drivers/net/ethernet/micrel, branch v5.8

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada

net: ks8851: Remove ks8851_mll.c

2020-05-28T23:30:04+00:00

The ks8851_mll.c is replaced by ks8851_par.c, which is using common code
from ks8851.c, just like ks8851_spi.c . Remove this old ad-hoc driver.

Signed-off-by: Marek Vasut 
Cc: David S. Miller 
Cc: Lukas Wunner 
Cc: Petr Stetiar 
Cc: YueHaibing 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: ks8851: Implement Parallel bus operations

2020-05-28T23:30:04+00:00

Implement accessors for KS8851-16MLL/MLLI/MLLU parallel bus variant of
the KS8851. This is based off the ks8851_mll.c , which is a driver for
exactly the same hardware, however the ks8851.c code is much higher
quality. Hence, this patch pulls out the relevant information from the
ks8851_mll.c on how to access the bus, but uses the common ks8851.c
code. To make this patch reviewable, instead of rewriting ks8851_mll.c,
ks8851_mll.c is removed in a separate subsequent patch.

Signed-off-by: Marek Vasut 
Cc: David S. Miller 
Cc: Lukas Wunner 
Cc: Petr Stetiar 
Cc: YueHaibing 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: ks8851: Separate SPI operations into separate file

2020-05-28T23:30:04+00:00

Pull all the SPI bus specific code into a separate file, so that it is
not mixed with the common code. Rename ks8851.c to ks8851_common.c. The
ks8851_common.c is linked with ks8851_spi.c now, so it can call the
accessors in the ks8851_spi.c without any pointer indirection.

Signed-off-by: Marek Vasut 
Cc: David S. Miller 
Cc: Lukas Wunner 
Cc: Petr Stetiar 
Cc: YueHaibing 
Signed-off-by: David S. Miller

net: ks8851: Implement register, FIFO, lock accessor callbacks

2020-05-28T23:30:04+00:00

The register and FIFO accessors are bus specific, so is locking.
Implement callbacks so that each variant of the KS8851 can implement
matching accessors and locking, and use the rest of the common code.

Reviewed-by: Andrew Lunn 
Signed-off-by: Marek Vasut 
Cc: David S. Miller 
Cc: Lukas Wunner 
Cc: Petr Stetiar 
Cc: YueHaibing 
Signed-off-by: David S. Miller

net: ks8851: Permit overridding interrupt enable register

2020-05-28T23:30:04+00:00

The parallel bus variant does not need to use the TX interrupt at all
as it writes the TX FIFO directly with in .ndo_start_xmit, permit the
drivers to configure the interrupt enable bits.

Reviewed-by: Andrew Lunn 
Signed-off-by: Marek Vasut 
Cc: David S. Miller 
Cc: Lukas Wunner 
Cc: Petr Stetiar 
Cc: YueHaibing 
Signed-off-by: David S. Miller

net: ks8851: Factor out TX work flush function

2020-05-28T23:30:04+00:00

While the SPI version of the KS8851 requires a TX worker thread to pump
data via SPI, the parallel bus version can write data into the TX FIFO
directly in .ndo_start_xmit, as the parallel bus access is much faster
and does not sleep. Factor out this TX work flush part, so it can be
overridden by the parallel bus driver.

Reviewed-by: Andrew Lunn 
Signed-off-by: Marek Vasut 
Cc: David S. Miller 
Cc: Lukas Wunner 
Cc: Petr Stetiar 
Cc: YueHaibing 
Signed-off-by: David S. Miller

net: ks8851: Split out SPI specific code from probe() and remove()

2020-05-28T23:30:04+00:00

Factor out common code into ks8851_probe_common() and
ks8851_remove_common() to permit both SPI and parallel
bus driver variants to use the common code path for
both probing and removal.

There should be no functional change.

Reviewed-by: Andrew Lunn 
Signed-off-by: Marek Vasut 
Cc: David S. Miller 
Cc: Lukas Wunner 
Cc: Petr Stetiar 
Cc: YueHaibing 
Signed-off-by: David S. Miller

net: ks8851: Split out SPI specific entries in struct ks8851_net

2020-05-28T23:30:04+00:00

Add a new struct ks8851_net_spi, which embeds the original
struct ks8851_net and contains the entries specific only to
the SPI variant of KS8851.

There should be no functional change.

Reviewed-by: Andrew Lunn 
Signed-off-by: Marek Vasut 
Cc: David S. Miller 
Cc: Lukas Wunner 
Cc: Petr Stetiar 
Cc: YueHaibing 
Signed-off-by: David S. Miller

net: ks8851: Factor out SKB receive function

2020-05-28T23:30:04+00:00

Factor out this netif_rx_ni(), so it could be overridden by the parallel
bus variant of the KS8851 driver.

Signed-off-by: Marek Vasut 
Cc: David S. Miller 
Cc: Lukas Wunner 
Cc: Petr Stetiar 
Cc: YueHaibing 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller