linux.git/drivers/net/ethernet/freescale, branch v3.2 Linux kernel source tree net: fsl: fec: fix build for mx23-only kernel 2012-01-03T18:48:41+00:00 Wolfram Sang w.sang@pengutronix.de 2012-01-03T03:46:47+00:00 0d9032477f4ba2323079466efef0c1419613eebf If one only selects mx23-based boards, compile fails: drivers/net/ethernet/freescale/fec.c:410:2: error: 'FEC_HASH_TABLE_HIGH' undeclared (first use in this function) drivers/net/ethernet/freescale/fec.c:411:2: error: 'FEC_HASH_TABLE_LOW' undeclared (first use in this function) This is because fec.h uses CONFIG_SOC_IMX28 to determine the register layout of the core which makes sense since the MX23 does not have a fec. However, Kconfig uses the broader ARCH_MXS symbol and this way even makes the fec-driver default for MX23. Adapt Kconfig to use the more precise SOC_IMX28 as well. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: David S. Miller <davem@davemloft.net> Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
If one only selects mx23-based boards, compile fails:

drivers/net/ethernet/freescale/fec.c:410:2: error: 'FEC_HASH_TABLE_HIGH' undeclared (first use in this function)
drivers/net/ethernet/freescale/fec.c:411:2: error: 'FEC_HASH_TABLE_LOW' undeclared (first use in this function)

This is because fec.h uses CONFIG_SOC_IMX28 to determine the register
layout of the core which makes sense since the MX23 does not have a fec.
However, Kconfig uses the broader ARCH_MXS symbol and this way even
makes the fec-driver default for MX23. Adapt Kconfig to use the more
precise SOC_IMX28 as well.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fsl_pq_mdio: Clean up tbi address configuration 2011-12-07T18:54:57+00:00 Andy Fleming afleming@freescale.com 2011-11-11T05:10:39+00:00 28d8ea2d568534026ccda3e8936f5ea1e04a86a1 The code for setting the address of the internal TBI PHY was convoluted enough without a maze of ifdefs. Clean it up a bit so we allow the logic to fail down to -ENODEV at the end of the if/else ladder, rather than using ifdefs to repeat the same failure code over and over. Also, remove the support for the auto-configuration. I'm not aware of anyone using it, and it ends up using the bus mutex before it's been initialized. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The code for setting the address of the internal TBI PHY was
convoluted enough without a maze of ifdefs. Clean it up a bit
so we allow the logic to fail down to -ENODEV at the end of
the if/else ladder, rather than using ifdefs to repeat the same
failure code over and over.

Also, remove the support for the auto-configuration. I'm not aware of
anyone using it, and it ends up using the bus mutex before it's been
initialized.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/fec: fix the use of pdev->id 2011-12-07T18:29:04+00:00 Shawn Guo shawn.guo@linaro.org 2011-12-05T05:01:15+00:00 43af940c54d712ab5e6d6798a82498b25c2af299 The pdev->id is used in several places for different purpose. All these uses assume it's always the id of fec device which is >= 0. However this is only true for non-DT case. When DT plays, pdev->id is always -1, which will break these pdev->id users. Instead of fixing all these users one by one, this patch introduces a new member 'dev_id' to 'struct fec_enet_private' for holding the correct fec device id, and replaces all the existing uses of pdev->id with this dev_id. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
The pdev->id is used in several places for different purpose.  All
these uses assume it's always the id of fec device which is >= 0.
However this is only true for non-DT case.  When DT plays, pdev->id
is always -1, which will break these pdev->id users.

Instead of fixing all these users one by one, this patch introduces
a new member 'dev_id' to 'struct fec_enet_private' for holding the
correct fec device id, and replaces all the existing uses of pdev->id
with this dev_id.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: fec: Select the FEC driver by default for i.MX SoCs 2011-11-30T22:07:21+00:00 Fabio Estevam fabio.estevam@freescale.com 2011-11-30T22:07:21+00:00 15fc1f3617edea50fa58703d59f73e726377bc63 Since commit 230dec6 (net/fec: add imx6q enet support) the FEC driver is no longer built by default for i.MX SoCs. Let the FEC driver be built by default again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
Since commit 230dec6 (net/fec: add imx6q enet support) the FEC driver is no 
longer built by default for i.MX SoCs.

Let the FEC driver be built by default again.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2011-11-07T18:55:33+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-11-07T18:55:33+00:00 94956eed14b4b16d401c8ad36d68df0608f968cb * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ... 
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  forcedeth: fix a few sparse warnings (variable shadowing)
  forcedeth: Improve stats counters
  forcedeth: remove unneeded stats updates
  forcedeth: Acknowledge only interrupts that are being processed
  forcedeth: fix race when unloading module
  MAINTAINERS/rds: update maintainer
  wanrouter: Remove kernel_lock annotations
  usbnet: fix oops in usbnet_start_xmit
  ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined
  etherh: Add MAINTAINERS entry for etherh
  bonding: comparing a u8 with -1 is always false
  sky2: fix regression on Yukon Optima
  netlink: clarify attribute length check documentation
  netlink: validate NLA_MSECS length
  i825xx:xscale:8390:freescale: Fix Kconfig dependancies
  macvlan: receive multicast with local address
  tg3: Update version to 3.121
  tg3: Eliminate timer race with reset_task
  tg3: Schedule at most one tg3_reset_task run
  tg3: Obtain PCI function number from device
  ...
i825xx:xscale:8390:freescale: Fix Kconfig dependancies 2011-11-04T21:41:20+00:00 Jeff Kirsher jeffrey.t.kirsher@intel.com 2011-11-02T00:30:52+00:00 433aee04a447fb2e769c4570f327d9c2a956117b i825xx and xscale are "sub" Kconfigs to NET_VENDOR_INTEL, so NET_VENDOR_INTEL should contain ALL the dependencies of the "sub" Kconfigs. Same with 8390 is a "sub" Kconfig to NET_VENDOR_NATSEMI, so NET_VENDOR_NATSEMI needs to contains ALL the dependencies. Freescale Kconfig only had fs_enet as a sub Kconfig, and already contained the needed dependencies, just cleaned up the dependencies. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
i825xx and xscale are "sub" Kconfigs to NET_VENDOR_INTEL, so
NET_VENDOR_INTEL should contain ALL the dependencies of the
"sub" Kconfigs.

Same with 8390 is a "sub" Kconfig to NET_VENDOR_NATSEMI, so
NET_VENDOR_NATSEMI needs to contains ALL the dependencies.

Freescale Kconfig only had fs_enet as a sub Kconfig, and already
contained the needed dependencies, just cleaned up the dependencies.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net: Add module.h to drivers who were implicitly using it 2011-10-31T23:31:07+00:00 Paul Gortmaker paul.gortmaker@windriver.com 2011-07-03T19:21:01+00:00 9d9779e723a5d23b94abbe5bb7d1197921f6f3dd The device.h header was including module.h, making it present for most of these drivers. But we want to clean that up. Call out the include of module.h in the modular network drivers. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> 
The device.h header was including module.h, making it present for
most of these drivers.  But we want to clean that up.  Call out the
include of module.h in the modular network drivers.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
net/fec: add poll controller function for fec nic 2011-09-29T18:46:49+00:00 Xiao Jiang jgq516@gmail.com 2011-09-29T02:15:57+00:00 7f5c6addcdc039c1a7c435857e6284ecac5d97c8 Add poll controller function for fec nic. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add poll controller function for fec nic.

Signed-off-by: Xiao Jiang <jgq516@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/fec: replace hardcoded irq num with macro 2011-09-29T18:46:49+00:00 Xiao Jiang jgq516@gmail.com 2011-09-29T02:15:56+00:00 c7c83d1c95b84cf0e71e947613a5d409cf0ebca1 Don't use hardcoded irq num and replace it with FEC_IRQ_NUM macro. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Don't use hardcoded irq num and replace it with
FEC_IRQ_NUM macro.

Signed-off-by: Xiao Jiang <jgq516@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/fec: add imx6q enet support 2011-09-23T17:55:26+00:00 Shawn Guo shawn.guo@linaro.org 2011-09-23T02:12:48+00:00 230dec61313dc5f5720311d0b492f69f5466b0a4 The imx6q enet is a derivative of imx28 enet controller. It fixed the frame endian issue found on imx28, and added 1 Gbps support. It also fixes a typo on vendor name in Kconfig. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
The imx6q enet is a derivative of imx28 enet controller.  It fixed
the frame endian issue found on imx28, and added 1 Gbps support.

It also fixes a typo on vendor name in Kconfig.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>