linux.git/drivers/net/ethernet/cisco, branch v3.2

net: add skb frag size accessors

2011-10-19T07:10:46+00:00

To ease skb->truesize sanitization, its better to be able to localize
all references to skb frags size.

Define accessors : skb_frag_size() to fetch frag size, and
skb_frag_size_{set|add|sub}() to manipulate it.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

net: use DMA_x_DEVICE and dma_mapping_error with skb_frag_dma_map

2011-10-06T20:17:20+00:00

When I converted some drivers from pci_map_page to skb_frag_dma_map I
neglected to convert PCI_DMA_xDEVICE into DMA_x_DEVICE and
pci_dma_mapping_error into dma_mapping_error.

Signed-off-by: Ian Campbell 
Signed-off-by: David S. Miller

enic: Add support for port profile association on a enic SRIOV VF

2011-09-27T05:10:24+00:00

This patch touchs most of the enic port profile handling code.
Tried to break it into sub patches without success.

The patch mainly does the following:
- Port profile operations for a SRIOV VF are modified to work
  only via its PF
- Changes the port profile static struct in struct enic to a pointer.
  This is because a SRIOV PF has to now hold the port profile information
  for all its VF's
- Moved address registration for VF's during port profile ASSOCIATE time
- Most changes in port profile handling code are changes related to indexing
  into the port profile struct array of a PF for the VF port profile
  information

Signed-off-by: Roopa Prabhu 
Signed-off-by: Sujith Sankar 
Signed-off-by: Christian Benvenuti 
Signed-off-by: David Wang 
Signed-off-by: David S. Miller

enic: Helper code for SRIOV proxy commands

2011-09-27T05:10:24+00:00

This patch adds helper functions to use PF as proxy for SRIOV VF firmware
commands.

Signed-off-by: Roopa Prabhu 
Signed-off-by: Sujith Sankar 
Signed-off-by: Christian Benvenuti 
Signed-off-by: David Wang 
Signed-off-by: David S. Miller

enic: Add SRIOV support

2011-09-27T05:10:23+00:00

This patch adds support to enable SRIOV on enic devices. Enic SRIOV VF's are dynamic vnics and will use the same driver code as dynamic vnics.

Signed-off-by: Roopa Prabhu 
Signed-off-by: Sujith Sankar 
Signed-off-by: Christian Benvenuti 
Signed-off-by: David Wang 
Signed-off-by: David S. Miller

enic: convert to SKB paged frag API.

2011-08-30T21:58:02+00:00

Signed-off-by: Ian Campbell 
Cc: Christian Benvenuti 
Cc: Vasanthy Kolluri 
Cc: Roopa Prabhu 
Cc: David Wang 
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller

drivers/net/ethernet/*: Enabled vendor Kconfig options

2011-08-27T07:58:56+00:00

Based on finds for Stephen Rothwell, where current defconfig's
enable a ethernet driver and it is not compiled due to the newly
added NET_VENDOR_* component of Kconfig.

This patch enables all the "new" Kconfig options so that current
defconfig's will continue to compile the expected drivers.  In
addition, by enabling all the new Kconfig options does not add
any un-expected options.

CC: Stephen Rothwll 
Signed-off-by: Jeff Kirsher

net: remove use of ndo_set_multicast_list in drivers

2011-08-18T03:22:03+00:00

replace it by ndo_set_rx_mode

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

net: introduce IFF_UNICAST_FLT private flag

2011-08-18T03:21:27+00:00

Use IFF_UNICAST_FTL to find out if driver handles unicast address
filtering. In case it does not, promisc mode is entered.

Patch also fixes following drivers:
stmmac, niu: support uc filtering and yet it propagated
	ndo_set_multicast_list
bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set
	ndo_set_rx_mode but do not support uc filtering

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

enic: Move the Cisco driver

2011-08-11T09:42:06+00:00

Move the Cisco driver into drivers/net/ethernet/cisco/ and make the
necessary Kconfig and Makefile changes.

CC: Christian Benvenuti 
CC: Vasanthy Kolluri 
CC: Roopa Prabhu 
CC: David Wang 
Signed-off-by: Jeff Kirsher