linux.git/drivers/net/dsa, branch v5.3-rc2 Linux kernel source tree net: dsa: qca8k: replace legacy gpio include 2019-07-12T22:38:07+00:00 Christian Lamparter chunkeey@gmail.com 2019-07-12T15:33:36+00:00 f32ae8a5f131a92cd8179adf55cd8405c60e0c20 This patch replaces the legacy bulk gpio.h include with the proper gpio/consumer.h variant. This was caught by the kbuild test robot that was running into an error because of this. For more information why linux/gpio.h is bad can be found in: commit 56a46b6144e7 ("gpio: Clarify that <linux/gpio.h> is legacy") Reported-by: kbuild test robot <lkp@intel.com> Link: https://www.spinics.net/lists/netdev/msg584447.html Fixes: a653f2f538f9 ("net: dsa: qca8k: introduce reset via gpio feature") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch replaces the legacy bulk gpio.h include
with the proper gpio/consumer.h variant. This was
caught by the kbuild test robot that was running
into an error because of this.

For more information why linux/gpio.h is bad can be found in:
commit 56a46b6144e7 ("gpio: Clarify that <linux/gpio.h> is legacy")

Reported-by: kbuild test robot <lkp@intel.com>
Link: https://www.spinics.net/lists/netdev/msg584447.html
Fixes: a653f2f538f9 ("net: dsa: qca8k: introduce reset via gpio feature")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: vsc73xx: fix NET_DSA and OF dependencies 2019-07-09T20:19:53+00:00 Arnd Bergmann arnd@arndb.de 2019-07-09T18:55:55+00:00 a1cd4e4324afa4d8a2d6d0ce16bc689d6bab02cc The restructuring of the driver got the dependencies wrong: without CONFIG_NET_DSA we get this build failure: WARNING: unmet direct dependencies detected for NET_DSA_VITESSE_VSC73XX Depends on [n]: NETDEVICES [=y] && HAVE_NET_DSA [=y] && OF [=y] && NET_DSA [=n] Selected by [m]: - NET_DSA_VITESSE_VSC73XX_PLATFORM [=m] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && HAS_IOMEM [=y] ERROR: "dsa_unregister_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! ERROR: "dsa_switch_alloc" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! ERROR: "dsa_register_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! Add the appropriate dependencies. Fixes: 95711cd5f0b4 ("net: dsa: vsc73xx: Split vsc73xx driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
The restructuring of the driver got the dependencies wrong: without
CONFIG_NET_DSA we get this build failure:

WARNING: unmet direct dependencies detected for NET_DSA_VITESSE_VSC73XX
  Depends on [n]: NETDEVICES [=y] && HAVE_NET_DSA [=y] && OF [=y] && NET_DSA [=n]
  Selected by [m]:
  - NET_DSA_VITESSE_VSC73XX_PLATFORM [=m] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && HAS_IOMEM [=y]

ERROR: "dsa_unregister_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined!
ERROR: "dsa_switch_alloc" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined!
ERROR: "dsa_register_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined!

Add the appropriate dependencies.

Fixes: 95711cd5f0b4 ("net: dsa: vsc73xx: Split vsc73xx driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-07-09T02:48:57+00:00 David S. Miller davem@davemloft.net 2019-07-09T02:48:57+00:00 af144a983402f7fd324ce556d9f9011a8b3e01fe Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net> 
Two cases of overlapping changes, nothing fancy.

Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: vsc73xx: Assert reset if iCPU is enabled 2019-07-07T21:16:32+00:00 Pawel Dembicki paweldembicki@gmail.com 2019-07-04T22:29:07+00:00 1da39ff09e561df9062342563ce8db9b9181a3de Driver allow to use devices with disabled iCPU only. Some devices have pre-initialised iCPU by bootloader. That state make switch unmanaged. This patch force reset if device is in unmanaged state. In the result chip lost internal firmware from RAM and it can be managed. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Driver allow to use devices with disabled iCPU only.

Some devices have pre-initialised iCPU by bootloader.
That state make switch unmanaged. This patch force reset
if device is in unmanaged state. In the result chip lost
internal firmware from RAM and it can be managed.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: vsc73xx: add support for parallel mode 2019-07-07T21:16:32+00:00 Pawel Dembicki paweldembicki@gmail.com 2019-07-04T22:29:06+00:00 631e83bf7c0e801f0ab960a97a3228b2dbf9ebeb This patch add platform part of vsc73xx driver. It allows to use chip connected to a parallel memory bus and work in memory-mapped I/O mode. (aka PI bus in chip manual) By default device is working in big endian mode. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch add platform part of vsc73xx driver.
It allows to use chip connected to a parallel memory bus and work in
memory-mapped I/O mode. (aka PI bus in chip manual)

By default device is working in big endian mode.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: vsc73xx: Split vsc73xx driver 2019-07-07T21:16:32+00:00 Pawel Dembicki paweldembicki@gmail.com 2019-07-04T22:29:05+00:00 95711cd5f0b4b0394f2e0c30fdd99b853317ed49 This driver (currently) only takes control of the switch chip over SPI and configures it to route packages around when connected to a CPU port. But Vitesse chip support also parallel interface. This patch split driver into two parts: core and spi. It is required for add support to another managing interface. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This driver (currently) only takes control of the switch chip over
SPI and configures it to route packages around when connected to a
CPU port. But Vitesse chip support also parallel interface.

This patch split driver into two parts: core and spi. It is required
for add support to another managing interface.

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: mv88e6xxx: wait after reset deactivation 2019-06-29T19:21:18+00:00 Baruch Siach baruch@tkos.co.il 2019-06-27T18:17:39+00:00 7b75e49de424ceb53d13e60f35d0a73765626fda Add a 1ms delay after reset deactivation. Otherwise the chip returns bogus ID value. This is observed with 88E6390 (Peridot) chip. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add a 1ms delay after reset deactivation. Otherwise the chip returns
bogus ID value. This is observed with 88E6390 (Peridot) chip.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: b53: Disable all ports on setup 2019-06-28T20:34:13+00:00 Benedikt Spranger b.spranger@linutronix.de 2019-06-28T16:58:11+00:00 75dad2520fc37345075498e9c5aa1355b4993dbc A b53 device may configured through an external EEPROM like the switch device on the Lamobo R1 router board. The configuration of a port may therefore differ from the reset configuration of the switch. The switch configuration reported by the DSA subsystem is different until the port is configured by DSA i.e. a port can be active, while the DSA subsystem reports the port is inactive. Disable all ports and not only the unused ones to put all ports into a well defined state. Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
A b53 device may configured through an external EEPROM like the switch
device on the Lamobo R1 router board. The configuration of a port may
therefore differ from the reset configuration of the switch.

The switch configuration reported by the DSA subsystem is different until
the port is configured by DSA i.e. a port can be active, while the DSA
subsystem reports the port is inactive. Disable all ports and not only
the unused ones to put all ports into a well defined state.

Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: sja1105: Mark in-band AN modes not supported for PHYLINK 2019-06-28T16:31:31+00:00 Vladimir Oltean olteanv@gmail.com 2019-06-27T21:46:37+00:00 9f971573d96fc55efe9d48ff2ca160c9b95fbe37 We need a better way to signal this, perhaps in phylink_validate, but for now just print this error message as guidance for other people looking at this driver's code while trying to rework PHYLINK. Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
We need a better way to signal this, perhaps in phylink_validate, but
for now just print this error message as guidance for other people
looking at this driver's code while trying to rework PHYLINK.

Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: sja1105: Check for PHY mode mismatches with what PHYLINK reports 2019-06-28T16:31:31+00:00 Vladimir Oltean olteanv@gmail.com 2019-06-27T21:46:36+00:00 39710229af9b6b69b858b36fe97d9239af0afe78 PHYLINK being designed with PHYs in mind that can change MII protocol, for correct operation it is necessary to ensure that the PHY interface mode stays the same (otherwise clear the supported bit mask, as required). Because this is just a hypothetical situation for now, we don't bother to check whether we could actually support the new PHY interface mode. Actually we could modify the xMII table, reset the switch and send an updated static configuration, but adding that would just be dead code. Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
PHYLINK being designed with PHYs in mind that can change MII protocol,
for correct operation it is necessary to ensure that the PHY interface
mode stays the same (otherwise clear the supported bit mask, as
required).

Because this is just a hypothetical situation for now, we don't bother
to check whether we could actually support the new PHY interface mode.
Actually we could modify the xMII table, reset the switch and send an
updated static configuration, but adding that would just be dead code.

Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>