linux.git/drivers/net/dsa/b53/b53_priv.h, branch v5.2 Linux kernel source tree net: dsa: b53: Use vlan_filtering property from dsa_switch 2019-05-01T03:05:29+00:00 Vladimir Oltean olteanv@gmail.com 2019-04-28T18:45:53+00:00 e74f014eb4ceeeefe4e5058daac705422eecb683 While possible (and safe) to use the newly introduced dsa_port_is_vlan_filtering helper, fabricating a dsa_port pointer is a bit awkward, so simply retrieve this from the dsa_switch structure. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
While possible (and safe) to use the newly introduced
dsa_port_is_vlan_filtering helper, fabricating a dsa_port pointer is a
bit awkward, so simply retrieve this from the dsa_switch structure.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
dsa: Remove phydev parameter from disable_port call 2019-02-25T06:30:34+00:00 Andrew Lunn andrew@lunn.ch 2019-02-24T19:44:43+00:00 75104db0cb353ec0b74644d960640ac0f84ab839 No current DSA driver makes use of the phydev parameter passed to the disable_port call. Remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
No current DSA driver makes use of the phydev parameter passed to the
disable_port call. Remove it.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: b53: Properly account for VLAN filtering 2019-02-16T04:37:54+00:00 Florian Fainelli f.fainelli@gmail.com 2019-02-15T20:16:50+00:00 dad8d7c6452b5b9f9828c9e2c7ca143205fd40c7 VLAN filtering can be built into the kernel, and also dynamically turned on/off through the bridge master device. Allow re-configuring the switch appropriately to account for that by deciding whether VLAN table (v_table) misses should lead to a drop or forward. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
VLAN filtering can be built into the kernel, and also dynamically turned
on/off through the bridge master device. Allow re-configuring the switch
appropriately to account for that by deciding whether VLAN table
(v_table) misses should lead to a drop or forward.

Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: b53: Add SerDes support 2018-09-06T14:48:34+00:00 Florian Fainelli f.fainelli@gmail.com 2018-09-05T19:42:15+00:00 0e01491de646000567bc202cc70026dc4b7f7d7a Add support for the Northstar Plus SerDes which is accessed through a special page of the switch. Since this is something that most people probably will not want to use, make it a configurable option with a default on ARCH_BCM_NSP where it is the most useful currently. The SerDes supports both SGMII and 1000baseX modes for both lanes, and 2500baseX for one of the lanes, and is internally looking like a seemingly standard MII PHY, except for the few bits that got repurposed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add support for the Northstar Plus SerDes which is accessed through a
special page of the switch. Since this is something that most people
probably will not want to use, make it a configurable option with a
default on ARCH_BCM_NSP where it is the most useful currently.

The SerDes supports both SGMII and 1000baseX modes for both lanes, and
2500baseX for one of the lanes, and is internally looking like a
seemingly standard MII PHY, except for the few bits that got repurposed.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: b53: Add PHYLINK support 2018-09-06T14:48:34+00:00 Florian Fainelli f.fainelli@gmail.com 2018-09-05T19:42:14+00:00 a8e8b98531369c9d9f21a81587b630935c64cb59 Add support for PHYLINK, things are reasonably straight forward since we do not yet support SerDes interfaces, that leaves us with just MLO_AN_PHY and MLO_AN_FIXED to deal with. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add support for PHYLINK, things are reasonably straight forward since we
do not yet support SerDes interfaces, that leaves us with just
MLO_AN_PHY and MLO_AN_FIXED to deal with.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: b53: Add ability to enable/disable port interrupts 2018-09-06T14:48:33+00:00 Florian Fainelli f.fainelli@gmail.com 2018-09-05T19:42:11+00:00 8ca7c1608c34aeaed2411af60b3531b2ddf85cc3 Some switches expose individual interrupt line(s) for port specific event(s), allow configuring these interrupts at an appropriate time during port_enable/disable callbacks where all port specific resources are known to be set-up and ready for use. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
Some switches expose individual interrupt line(s) for port specific
event(s), allow configuring these interrupts at an appropriate time
during port_enable/disable callbacks where all port specific resources
are known to be set-up and ready for use.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC 2018-06-06T17:47:16+00:00 Arun Parameswaran arun.parameswaran@broadcom.com 2018-06-05T20:38:12+00:00 5040cc990cbac98733df4d58fdeac5bbdab15b49 In the Broadcom Cygnus SoC, the brcm tag needs to be inserted in between the mac address and the ether type (should use 'DSA_PROTO_TAG_BRCM') for the packets sent to the internal b53 switch. Since the Cygnus was added with the BCM58XX device id and the BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is broken, due to the incorrect brcm tag location. Add a new b53 device id (BCM583XX) for Cygnus family to fix the issue. Add the new device id to the BCM58XX family as Cygnus is similar to the BCM58XX in most other functionalities. Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags") Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reported-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
In the Broadcom Cygnus SoC, the brcm tag needs to be inserted
in between the mac address and the ether type (should use
'DSA_PROTO_TAG_BRCM') for the packets sent to the internal
b53 switch.

Since the Cygnus was added with the BCM58XX device id and the
BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is
broken, due to the incorrect brcm tag location.

Add a new b53 device id (BCM583XX) for Cygnus family to fix the
issue. Add the new device id to the BCM58XX family as Cygnus
is similar to the BCM58XX in most other functionalities.

Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags")

Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reported-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-06-03T13:31:58+00:00 David S. Miller davem@davemloft.net 2018-06-03T13:31:58+00:00 9c54aeb03a6d65a5834bd92376e921cbac6dfb8f Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net> 
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: b53: Add BCM5389 support 2018-06-01T15:15:42+00:00 Damien Thébault damien.thebault@vitec.com 2018-05-31T07:04:01+00:00 a95691bc54af1ac4b12c354f91e9cabf1cb068df This patch adds support for the BCM5389 switch connected through MDIO. Signed-off-by: Damien Thébault <damien.thebault@vitec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch adds support for the BCM5389 switch connected through MDIO.

Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: b53: Add support for reading PHY statistics 2018-04-27T15:53:03+00:00 Florian Fainelli f.fainelli@gmail.com 2018-04-25T19:12:53+00:00 c7d28c9df292a49904446dca15b2037ee8f874af Allow the b53 driver to return PHY statistics when the CPU port used is different than 5, 7 or 8, because those are typically PHY-less on most devices. This is useful for debugging link problems between the switch and an external host when using a non standard CPU port number (e.g: 4). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Allow the b53 driver to return PHY statistics when the CPU port used is
different than 5, 7 or 8, because those are typically PHY-less on most
devices. This is useful for debugging link problems between the switch
and an external host when using a non standard CPU port number (e.g: 4).

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>