linux.git/drivers/net/can, branch v5.2-rc2 Linux kernel source tree treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 2019-05-21T09:28:45+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-19T13:51:43+00:00 1ccea77e2a2687cae171b7987eb44730ec8c6d5f Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21T08:50:46+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-19T12:07:45+00:00 ec8f24b7faaf3d4799a7c3f4c1b87f6b02778ad1 Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
peak_usb: fix clang build warning 2019-03-07T17:39:46+00:00 Arnd Bergmann arnd@arndb.de 2019-03-07T10:31:55+00:00 a2ae6da025ed73e4312d983b5e57300bc77090f3 Clang points out undefined behavior when building the pcan_usb_pro driver: drivers/net/can/usb/peak_usb/pcan_usb_pro.c:136:15: error: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Werror,-Wvarargs] Changing the function prototype to avoid argument promotion in the varargs call avoids the warning, and should make this well-defined. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Clang points out undefined behavior when building the pcan_usb_pro driver:

drivers/net/can/usb/peak_usb/pcan_usb_pro.c:136:15: error: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Werror,-Wvarargs]

Changing the function prototype to avoid argument promotion in the
varargs call avoids the warning, and should make this well-defined.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
can: flexcan: fix NULL pointer exception during bringup 2019-01-22T10:35:33+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2019-01-11T11:20:41+00:00 a55234dabe1f72cf22f9197980751d37e38ba020 Commit cbffaf7aa09e ("can: flexcan: Always use last mailbox for TX") introduced a loop letting i run up to (including) ARRAY_SIZE(regs->mb) and in the body accessed regs->mb[i] which is an out-of-bounds array access that then resulted in an access to an reserved register area. Later this was changed by commit 0517961ccdf1 ("can: flexcan: Add provision for variable payload size") to iterate a bit differently but still runs one iteration too much resulting to call flexcan_get_mb(priv, priv->mb_count) which results in a WARN_ON and then a NULL pointer exception. This only affects devices compatible with "fsl,p1010-flexcan", "fsl,imx53-flexcan", "fsl,imx35-flexcan", "fsl,imx25-flexcan", "fsl,imx28-flexcan", so newer i.MX SoCs are not affected. Fixes: cbffaf7aa09e ("can: flexcan: Always use last mailbox for TX") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> # >= 4.20 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
Commit cbffaf7aa09e ("can: flexcan: Always use last mailbox for TX")
introduced a loop letting i run up to (including) ARRAY_SIZE(regs->mb)
and in the body accessed regs->mb[i] which is an out-of-bounds array
access that then resulted in an access to an reserved register area.

Later this was changed by commit 0517961ccdf1 ("can: flexcan: Add
provision for variable payload size") to iterate a bit differently but
still runs one iteration too much resulting to call

	flexcan_get_mb(priv, priv->mb_count)

which results in a WARN_ON and then a NULL pointer exception. This
only affects devices compatible with "fsl,p1010-flexcan",
"fsl,imx53-flexcan", "fsl,imx35-flexcan", "fsl,imx25-flexcan",
"fsl,imx28-flexcan", so newer i.MX SoCs are not affected.

Fixes: cbffaf7aa09e ("can: flexcan: Always use last mailbox for TX")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org> # >= 4.20
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: fix 'passing zero to ERR_PTR()' warning 2019-01-22T10:34:17+00:00 YueHaibing yuehaibing@huawei.com 2018-12-12T09:24:01+00:00 7873e98c614aa8dd2c3429aa2e25dc0e9ccadffa Fix a static code checker warning: drivers/net/can/flexcan.c:1435 flexcan_setup_stop_mode() warn: passing zero to 'PTR_ERR' Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
Fix a static code checker warning:
drivers/net/can/flexcan.c:1435 flexcan_setup_stop_mode() warn: passing zero to 'PTR_ERR'

Fixes: de3578c198c6 ("can: flexcan: add self wakeup support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: dev: __can_get_echo_skb(): fix bogous check for non-existing skb by removing it 2019-01-22T10:18:34+00:00 Manfred Schlaegl manfred.schlaegl@ginzinger.com 2018-12-19T18:39:58+00:00 7b12c8189a3dc50638e7d53714c88007268d47ef This patch revert commit 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") After introduction of this change we encountered following new error message on various i.MX plattforms (flexcan): | flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non | existing skb: can_priv::echo_skb[0] The introduction of the message was a mistake because priv->echo_skb[idx] = NULL is a perfectly valid in following case: If CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In this case can_put_echo_skb will not set priv->echo_skb[idx]. It is therefore kept NULL. As additional argument for revert: The order of check and usage of idx was changed. idx is used to access an array element before checking it's boundaries. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Fixes: 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
This patch revert commit 7da11ba5c506
("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb")

After introduction of this change we encountered following new error
message on various i.MX plattforms (flexcan):

| flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non
| existing skb: can_priv::echo_skb[0]

The introduction of the message was a mistake because
priv->echo_skb[idx] = NULL is a perfectly valid in following case: If
CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type
of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In
this case can_put_echo_skb will not set priv->echo_skb[idx]. It is
therefore kept NULL.

As additional argument for revert: The order of check and usage of idx
was changed. idx is used to access an array element before checking it's
boundaries.

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Fixes: 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: split the Message Buffer RAM area 2018-11-28T15:52:25+00:00 Pankaj Bansal pankaj.bansal@nxp.com 2018-08-28T17:49:12+00:00 6cbf76028dcac01129211828d62314285231f79e The message buffer RAM area is not a contiguous 1KB area but 2 partitions of 512 bytes each. Till now, we used Message buffers with payload size 8 bytes, which translates to 32 MBs per partition and no spare space is left in any partition. However, in upcoming SOC LX2160A the message buffers can have payload size 64 bytes. This results in less than 32 MBs per partition and some empty area is left at the end of each partition.This empty area should not be accessed. Therefore, split the Message Buffer RAM area into two partitions. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
The message buffer RAM area is not a contiguous 1KB area but 2 partitions
of 512 bytes each. Till now, we used Message buffers with payload size 8
bytes, which translates to 32 MBs per partition and no spare space is left
in any partition.
However, in upcoming SOC LX2160A the message buffers can have payload size
64 bytes. This results in less than 32 MBs per partition and some empty
area is left at the end of each partition.This empty area should not be
accessed.
Therefore, split the Message Buffer RAM area into two partitions.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: Add provision for variable payload size 2018-11-28T15:51:44+00:00 Pankaj Bansal pankaj.bansal@nxp.com 2018-11-23T21:18:44+00:00 0517961ccdf190a7f25da9ab17982a6d496e5d1d Till now the flexcan module supported 8 byte payload size as per CAN 2.0 specifications. But now upcoming flexcan module in NXP LX2160A SOC supports CAN FD protocol too. The Message buffers need to be configured to have payload size 64 bytes. Therefore, added provision in the driver for payload size to be 64 bytes. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
Till now the flexcan module supported 8 byte payload size as per CAN 2.0
specifications. But now upcoming flexcan module in NXP LX2160A SOC
supports CAN FD protocol too. The Message buffers need to be configured
to have payload size 64 bytes.

Therefore, added provision in the driver for payload size to be 64 bytes.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: move rx_offload_add() from flexcan_probe() to flexcan_open() 2018-11-28T15:51:44+00:00 Pankaj Bansal pankaj.bansal@nxp.com 2018-08-13T18:20:49+00:00 5156c7b11f35bf305b809dd381d7842f7e078a37 rx offload depends on number of message buffers, which in turn depends on messgae buffer size. with the upcoming LX2160A SOC the message buffer size can be configured to 72 bytes if it were to be used in CAN FD mode. The current mode in which the flexcan is being operated is known at the time of flexcan_open() but not at the time of flexcan_probe(). Therefore, move the rx_offload_add() from flexcan_probe() to flexcan_open(). correspondingly, move rx_offload_delete() from flexcan_remove() to flexcan_close(). Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
rx offload depends on number of message buffers, which in turn depends
on messgae buffer size. with the upcoming LX2160A SOC the message buffer
size can be configured to 72 bytes if it were to be used in CAN FD mode.

The current mode in which the flexcan is being operated is known at the
time of flexcan_open() but not at the time of flexcan_probe().

Therefore, move the rx_offload_add() from flexcan_probe() to
flexcan_open(). correspondingly, move rx_offload_delete() from
flexcan_remove() to flexcan_close().

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: flexcan_chip_start(): enable loopback mode in flexcan 2018-11-28T15:51:44+00:00 Pankaj Bansal pankaj.bansal@nxp.com 2018-08-13T18:20:48+00:00 7ad0f53a394ba829e45682c2e21175791e36b649 Self reception disable bit needs to be cleared for loopback mode to work in flexcan. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
Self reception disable bit needs to be cleared for loopback mode to work
in flexcan.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>