linux.git/drivers/net/can/flexcan, branch v5.17 Linux kernel source tree can: flexcan: mark RX via mailboxes as supported on MCF5441X 2022-01-24T17:27:43+00:00 Marc Kleine-Budde mkl@pengutronix.de 2022-01-21T08:22:34+00:00 f04aefd4659b7959e50e6d0d649936c6940f9d34 Most flexcan IP cores support 2 RX modes: - FIFO - mailbox The flexcan IP core on the MCF5441X cannot receive CAN RTR messages via mailboxes. However the mailbox mode is more performant. The commit | 1c45f5778a3b ("can: flexcan: add ethtool support to change rx-rtr setting during runtime") added support to switch from FIFO to mailbox mode on these cores. After testing the mailbox mode on the MCF5441X by Angelo Dureghello, this patch marks it (without RTR capability) as supported. Further the IP core overview table is updated, that RTR reception via mailboxes is not supported. Link: https://lore.kernel.org/all/20220121084425.3141218-1-mkl@pengutronix.de Tested-by: Angelo Dureghello <angelo@kernel-space.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox

The flexcan IP core on the MCF5441X cannot receive CAN RTR messages
via mailboxes. However the mailbox mode is more performant. The commit

| 1c45f5778a3b ("can: flexcan: add ethtool support to change rx-rtr setting during runtime")

added support to switch from FIFO to mailbox mode on these cores.

After testing the mailbox mode on the MCF5441X by Angelo Dureghello,
this patch marks it (without RTR capability) as supported. Further the
IP core overview table is updated, that RTR reception via mailboxes is
not supported.

Link: https://lore.kernel.org/all/20220121084425.3141218-1-mkl@pengutronix.de
Tested-by: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: add ethtool support to get rx/tx ring parameters 2022-01-08T20:22:58+00:00 Dario Binacchi dario.binacchi@amarulasolutions.com 2022-01-08T18:16:33+00:00 74fc5a452ec3d7c051fed5e97494effb2e747d1d This patch adds ethtool support to get the number of message buffers configured for reception/transmission, which may also depends on runtime configurations such as the 'rx-rtr' flag state. Link: https://lore.kernel.org/all/20220108181633.420433-1-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> [mkl: port to net-next/master, replace __sw_hweight64 by simpler calculation] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
This patch adds ethtool support to get the number of message buffers
configured for reception/transmission, which may also depends on
runtime configurations such as the 'rx-rtr' flag state.

Link: https://lore.kernel.org/all/20220108181633.420433-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[mkl: port to net-next/master, replace __sw_hweight64 by simpler calculation]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: add ethtool support to change rx-rtr setting during runtime 2022-01-08T20:22:26+00:00 Marc Kleine-Budde mkl@pengutronix.de 2022-01-04T15:28:00+00:00 1c45f5778a3be5a67e8b318ab83664014ffa1f3e This patch adds a private flag to the flexcan driver to switch the "rx-rtr" setting on and off. "rx-rtr" on - Receive RTR frames. (default) The CAN controller can and will receive RTR frames. On some IP cores the controller cannot receive RTR frames in the more performant "RX mailbox" mode and will use "RX FIFO" mode instead. "rx-rtr" off - Waive ability to receive RTR frames. (not supported on all IP cores) This mode activates the "RX mailbox mode" for better performance, on some IP cores RTR frames cannot be received anymore. The "RX FIFO" mode uses a FIFO with a depth of 6 CAN frames. The "RX mailbox" mode uses up to 62 mailboxes. Link: https://lore.kernel.org/all/20220107193105.1699523-6-mkl@pengutronix.de Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Co-developed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
This patch adds a private flag to the flexcan driver to switch the
"rx-rtr" setting on and off.

"rx-rtr" on  - Receive RTR frames. (default)
               The CAN controller can and will receive RTR frames.

	       On some IP cores the controller cannot receive RTR
	       frames in the more performant "RX mailbox" mode and
	       will use "RX FIFO" mode instead.

"rx-rtr" off - Waive ability to receive RTR frames. (not supported on all IP cores)
               This mode activates the "RX mailbox mode" for better
	       performance, on some IP cores RTR frames cannot be
	       received anymore.

The "RX FIFO" mode uses a FIFO with a depth of 6 CAN frames.
The "RX mailbox" mode uses up to 62 mailboxes.

Link: https://lore.kernel.org/all/20220107193105.1699523-6-mkl@pengutronix.de
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Co-developed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: add more quirks to describe RX path capabilities 2022-01-08T19:17:43+00:00 Marc Kleine-Budde mkl@pengutronix.de 2022-01-07T13:29:15+00:00 c5c88591040ee7d84d037328eed9019d3ffab821 Most flexcan IP cores support 2 RX modes: - FIFO - mailbox Some IP core versions cannot receive CAN RTR messages via mailboxes. This patch adds quirks to document this. This information will be used in a later patch to switch from FIFO to more performant mailbox mode at the expense of losing the ability to receive RTR messages. This trade off is beneficial in certain use cases. Link: https://lore.kernel.org/all/20220107193105.1699523-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox

Some IP core versions cannot receive CAN RTR messages via mailboxes.
This patch adds quirks to document this.

This information will be used in a later patch to switch from FIFO to
more performant mailbox mode at the expense of losing the ability to
receive RTR messages. This trade off is beneficial in certain use
cases.

Link: https://lore.kernel.org/all/20220107193105.1699523-5-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: rename RX modes 2022-01-08T19:17:43+00:00 Marc Kleine-Budde mkl@pengutronix.de 2022-01-06T11:45:46+00:00 34ea4e1c99f1f177f87e4ae7896caef238dd741a Most flexcan IP cores support 2 RX modes: - FIFO - mailbox The names for these modes were chosen to reflect the name of the rx-offload mode they are using. The name of the RX modes should better reflect their difference with regards the flexcan IP core. So this patch renames the various occurrences of OFF_FIFO to RX_FIFO and OFF_TIMESTAMP to RX_MAILBOX: | FLEXCAN_TX_MB_RESERVED_OFF_FIFO -> FLEXCAN_TX_MB_RESERVED_RX_FIFO | FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP -> FLEXCAN_TX_MB_RESERVED_RX_MAILBOX | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP -> FLEXCAN_QUIRK_USE_RX_MAILBOX Link: https://lore.kernel.org/all/20220107193105.1699523-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox

The names for these modes were chosen to reflect the name of the
rx-offload mode they are using.

The name of the RX modes should better reflect their difference with
regards the flexcan IP core. So this patch renames the various
occurrences of OFF_FIFO to RX_FIFO and OFF_TIMESTAMP to RX_MAILBOX:

| FLEXCAN_TX_MB_RESERVED_OFF_FIFO -> FLEXCAN_TX_MB_RESERVED_RX_FIFO
| FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP -> FLEXCAN_TX_MB_RESERVED_RX_MAILBOX
| FLEXCAN_QUIRK_USE_OFF_TIMESTAMP -> FLEXCAN_QUIRK_USE_RX_MAILBOX

Link: https://lore.kernel.org/all/20220107193105.1699523-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: allow to change quirks at runtime 2022-01-08T19:17:42+00:00 Dario Binacchi dario.binacchi@amarulasolutions.com 2022-01-04T13:20:25+00:00 01bb4dccd92b4dc21f6af3312e5696924e371111 This is a preparation patch for the upcoming support to change the rx-rtr capability via the ethtool API. Link: https://lore.kernel.org/all/20220107193105.1699523-3-mkl@pengutronix.de Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
This is a preparation patch for the upcoming support to change the
rx-rtr capability via the ethtool API.

Link: https://lore.kernel.org/all/20220107193105.1699523-3-mkl@pengutronix.de
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: move driver into separate sub directory 2022-01-08T19:17:42+00:00 Marc Kleine-Budde mkl@pengutronix.de 2022-01-04T15:15:01+00:00 bfd00e021cf162049946a9e0047b0997d2b35fec This patch moves the flexcan driver into a separate directory, a later patch will add more files. Link: https://lore.kernel.org/all/20220107193105.1699523-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 
This patch moves the flexcan driver into a separate directory, a later
patch will add more files.

Link: https://lore.kernel.org/all/20220107193105.1699523-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>