linux.git/drivers/net/Kconfig, branch v2.6.14 Linux kernel source tree [PATCH] net/Kconfig: convert pocket_adapter ISA to PARPORT 2005-10-04T02:23:26+00:00 Grant Coady grant_lkml@dodo.com.au 2005-09-09T14:14:05+00:00 32fa2bfcf882f8901ca206e33b0d8975cc8e89a2 This patch changes pocket and parallel adaptors to depend on PARPORT instead of ISA in order to get the option in newer SuperIO based systems. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 
This patch changes pocket and parallel adaptors to depend on PARPORT
instead of ISA in order to get the option in newer SuperIO based systems.

Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
[NET]: Add Sun Cassini driver. 2005-09-27T22:24:13+00:00 David S. Miller davem@davemloft.net 2005-09-27T22:24:13+00:00 1f26dac32057baaf67d10b45c6b5277db862911d Written by Adrian Sun (asun@darksunrising.com). Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>. Further cleaned up and integrated by David S. Miller Signed-off-by: David S. Miller <davem@davemloft.net> 
Written by Adrian Sun (asun@darksunrising.com).
Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>.
Further cleaned up and integrated by David S. Miller

Signed-off-by: David S. Miller <davem@davemloft.net>
[PATCH] skge: gmac register access errors in dual port 2005-09-14T12:32:07+00:00 Stephen Hemminger shemminger@osdl.org 2005-09-09T19:54:56+00:00 46a60f2d718d56bba8695d6f1145eb40548d86f8 Merge of four previous patches and the Kconfig fix * Remove debug printk's * whitespace cleanup and version number change * clear interrupts, reset phy, and reset hardware on shutdown * ignore 64bit counter overflow interrupts * fix a couple of places where second port could clobber state of first port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 
Merge of four previous patches and the Kconfig fix
 * Remove debug printk's
 * whitespace cleanup and version number change
 * clear interrupts, reset phy, and reset hardware on shutdown
 * ignore 64bit counter overflow interrupts
 * fix a couple of places where second port could clobber state
   of first port.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
[PATCH] m68knommu: config support for FEC eth of 523x Coldfire processor family 2005-09-12T03:43:46+00:00 Greg Ungerer gerg@snapgear.com 2005-09-12T01:18:10+00:00 2af6921f6382456ed69163be9d2ee2c339134496 Add configuration support for the FEC ethernet controller in the Freescale 523x processor family. Also add and option to configure the second FEC controller on some Freescale processors. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 
Add configuration support for the FEC ethernet controller in the
Freescale 523x processor family. Also add and option to configure
the second FEC controller on some Freescale processors.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] net: add driver for the NIC on Cell Blades 2005-09-07T02:17:49+00:00 Jens Osterkamp Jens.Osterkamp@de.ibm.com 2005-09-05T22:19:29+00:00 aaec0fab5f8809fe1509fdc204e769bb35ebe41a This patch adds a driver for a new 1000 Mbit ethernet NIC. It is integrated on the south bridge that is used for our Cell Blades. The code gets the MAC address from the Open Firmware device tree, so it won't compile on platforms other than ppc64. This is the first public release, so I don't expect the first version to get merged, but I'd aim for integration within the 2.6.13 time frame. Cc: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 
This patch adds a driver for a new 1000 Mbit ethernet NIC.  It is
integrated on the south bridge that is used for our Cell Blades.

The code gets the MAC address from the Open Firmware device tree, so it
won't compile on platforms other than ppc64.

This is the first public release, so I don't expect the first version to
get merged, but I'd aim for integration within the 2.6.13 time frame.

Cc: Utz Bacher <utz.bacher@de.ibm.com>
Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
[PATCH] (15/22) Kconfig fix (82596) 2005-09-05T22:10:00+00:00 Al Viro viro@www.linux.org.uk 2005-08-25T05:24:56+00:00 9a4822063e4865d07e902edbd0f31baf4857c2ce driver is non-modular Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 
driver is non-modular

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
[PATCH] sis190: basic sis191 support 2005-09-05T22:06:53+00:00 Francois Romieu romieu@fr.zoreil.com 2005-09-02T22:57:51+00:00 e797637f4c1cbcecb2d8f5cfa05b161da1f0b802 The sis191 is the gigabit brother of the sis190. SiS's driver suggests that the register set is backward compatible: this should hopefully give a basic driver. The device should allow the usual features from a modern ethernet adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far the relevant register layout is not documented. SiS's driver does not provide these features either (at least not for Linux). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 
The sis191 is the gigabit brother of the sis190. SiS's driver suggests
that the register set is backward compatible: this should hopefully
give a basic driver.

The device should allow the usual features from a modern ethernet
adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far
the relevant register layout is not documented. SiS's driver does
not provide these features either (at least not for Linux).

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
[ARM] 2866/1: add i.MX set_mctrl / get_mctrl functions 2005-08-31T20:48:47+00:00 Sascha Hauer sascha@saschahauer.de 2005-08-31T20:48:47+00:00 0f302dc35412dc67035efc188b9d5c40711b4222 Patch from Sascha Hauer This patch adds support for setting and getting RTS / CTS via set_mtctrl / get_mctrl functions. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Patch from Sascha Hauer

This patch adds support for setting and getting RTS / CTS via
set_mtctrl / get_mctrl functions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
/spare/repo/netdev-2.6 branch 'chelsio' 2005-08-29T20:53:08+00:00 Jeff Garzik jgarzik@pobox.com 2005-08-29T20:53:08+00:00 39fbe47377062200acc26ea0ccef223b4399a82c 






Merge /spare/repo/linux-2.6/
2005-08-29T20:40:27+00:00

Jeff Garzik
jgarzik@pobox.com

2005-08-29T20:40:27+00:00

c1b054d03f5b31c33eaa0b267c629b118eaf3790