Pull UBI and UBIFS updates from Richard Weinberger: "UBI: - Use in-tree fault injection framework and add new injection types - Fix for a memory leak in the block driver UBIFS: - kernel-doc fixes - Various minor fixes" * tag 'ubifs-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: block: fix memleak in ubiblock_create() ubifs: fix kernel-doc warnings mtd: Add several functions to the fail_function list ubi: Reserve sufficient buffer length for the input mask ubi: Add six fault injection type for testing ubi: Split io_failures into write_failure and erase_failure ubi: Use the fault injection framework to enhance the fault injection capability ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path ubifs: Check @c->dirty_[n|p]n_cnt and @c->nroot state under @c->lp_mutex ubifs: describe function parameters ubifs: auth.c: fix kernel-doc function prototype warning ubifs: use crypto_shash_tfm_digest() in ubifs_hmac_wkm()
Pull block updates from Jens Axboe:
"Pretty quiet round this time around. This contains:
- NVMe updates via Keith:
- nvme fabrics spec updates (Guixin, Max)
- nvme target udpates (Guixin, Evan)
- nvme attribute refactoring (Daniel)
- nvme-fc numa fix (Keith)
- MD updates via Song:
- Fix/Cleanup RCU usage from conf->disks[i].rdev (Yu Kuai)
- Fix raid5 hang issue (Junxiao Bi)
- Add Yu Kuai as Reviewer of the md subsystem
- Remove deprecated flavors (Song Liu)
- raid1 read error check support (Li Nan)
- Better handle events off-by-1 case (Alex Lyakas)
- Efficiency improvements for passthrough (Kundan)
- Support for mapping integrity data directly (Keith)
- Zoned write fix (Damien)
- rnbd fixes (Kees, Santosh, Supriti)
- Default to a sane discard size granularity (Christoph)
- Make the default max transfer size naming less confusing
(Christoph)
- Remove support for deprecated host aware zoned model (Christoph)
- Misc fixes (me, Li, Matthew, Min, Ming, Randy, liyouhong, Daniel,
Bart, Christoph)"
* tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux: (78 commits)
block: Treat sequential write preferred zone type as invalid
block: remove disk_clear_zoned
sd: remove the !ZBC && blk_queue_is_zoned case in sd_read_block_characteristics
drivers/block/xen-blkback/common.h: Fix spelling typo in comment
blk-cgroup: fix rcu lockdep warning in blkg_lookup()
blk-cgroup: don't use removal safe list iterators
block: floor the discard granularity to the physical block size
mtd_blkdevs: use the default discard granularity
bcache: use the default discard granularity
zram: use the default discard granularity
null_blk: use the default discard granularity
nbd: use the default discard granularity
ubd: use the default discard granularity
block: default the discard granularity to sector size
bcache: discard_granularity should not be smaller than a sector
block: remove two comments in bio_split_discard
block: rename and document BLK_DEF_MAX_SECTORS
loop: don't abuse BLK_DEF_MAX_SECTORS
aoe: don't abuse BLK_DEF_MAX_SECTORS
null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS
...
Pull mtd updates from Miquel Raynal:
"MTD:
- Apart from preventing the mtdblk to run on top of ftl or ubiblk
(which may cause security issues and has no meaning anyway), there
are a few misc fixes.
Raw NAND:
- Two meaningful changes this time. The conversion of the brcmnand
driver to the ->exec_op() API, this series brought additional
changes to the core in order to help controller drivers to handle
themselves the WP pin during destructive operations when relevant.
- There is also a series bringing important fixes to the sequential
read feature.
- As always, there is as well a whole bunch of miscellaneous W=1
fixes, together with a few runtime fixes (double free, timeout
value, OOB layout, missing register initialization) and the usual
load of remove callbacks turned into void (which led to switch the
txx9ndfmc driver to use module_platform_driver()).
SPI NOR:
- SPI NOR comes with die erase support for multi die flashes, with
new octal protocols (1-1-8 and 1-8-8) parsed from SFDP and with an
updated documentation about what the contributors shall consider
when proposing flash additions or updates.
- Michael Walle stepped out from the reviewer role to maintainer"
* tag 'mtd/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (39 commits)
mtd: rawnand: Clarify conditions to enable continuous reads
mtd: rawnand: Prevent sequential reads with on-die ECC engines
mtd: rawnand: Fix core interference with sequential reads
mtd: rawnand: Prevent crossing LUN boundaries during sequential reads
mtd: Fix gluebi NULL pointer dereference caused by ftl notifier
dt-bindings: mtd: partitions: u-boot: Fix typo
mtd: rawnand: s3c2410: fix Excess struct member description kernel-doc warnings
MAINTAINERS: change my mail to the kernel.org one
mtd: spi-nor: sfdp: get the 1-1-8 and 1-8-8 protocol from SFDP
mtd: spi-nor: drop superfluous debug prints
mtd: spi-nor: sysfs: hide the flash name if not set
mtd: spi-nor: mark the flash name as obsolete
mtd: spi-nor: print flash ID instead of name
mtd: maps: vmu-flash: Fix the (mtd core) switch to ref counters
mtd: ssfdc: Remove an unused variable
mtd: rawnand: diskonchip: fix a potential double free in doc_probe
mtd: rawnand: rockchip: Add missing title to a kernel doc comment
mtd: rawnand: rockchip: Rename a structure
mtd: rawnand: pl353: Fix kernel doc
mtd: spi-nor: micron-st: Add support for mt25qu01g
...
If idr_alloc() fails, dev->gd will be put after goto out_cleanup_disk in ubiblock_create(), but dev->gd has not been assigned yet at this time, and 'gd' will not be put anymore. Fix it by putting 'gd' directly. Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
add mtd_read(), mtd_write(), mtd_erase(), mtd_block_markbad() to fail_function list for testing purpose - Specify the function to inject the fault echo mtd_read > /sys/kernel/debug/fail_function/inject - Specifies the return value of the function to inject the fault printf %#x -12 > /sys/kernel/debug/fail_function/mtd_read/retval - Specify other fault injection configuration parameters. echo -1 > /sys/kernel/debug/fail_function/times echo 100 > /sys/kernel/debug/fail_function/probability echo 15 > /sys/kernel/debug/fail_function/space Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
Because the mask received by the emulate_failures interface is a 32-bit unsigned integer, ensure that there is sufficient buffer length to receive and display this value. Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
This commit adds six fault injection type for testing to cover the abnormal path of the UBI driver. Inject the following faults when the UBI reads the LEB: +----------------------------+-----------------------------------+ | Interface name | emulate behavior | +----------------------------+-----------------------------------+ | emulate_eccerr | ECC error | +----------------------------+-----------------------------------+ | emulate_read_failure | read failure | |----------------------------+-----------------------------------+ | emulate_io_ff | read content as all FF | |----------------------------+-----------------------------------+ | emulate_io_ff_bitflips | content FF with MTD err reported | +----------------------------+-----------------------------------+ | emulate_bad_hdr | bad leb header | |----------------------------+-----------------------------------+ | emulate_bad_hdr_ebadmsg | bad header with ECC err | +----------------------------+-----------------------------------+ Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
The emulate_io_failures debugfs entry controls both write failure and erase failure. This patch split io_failures to write_failure and erase_failure. Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
To make debug parameters configurable at run time, use the fault injection framework to reconstruct the debugfs interface, and retain the legacy fault injection interface. Now, the file emulate_failures and fault_attr files control whether to enable fault emmulation. The file emulate_failures receives a mask that controls type and process of fault injection. Generally, for ease of use, you can directly enter a mask with all 1s. echo 0xffff > /sys/kernel/debug/ubi/ubi0/emulate_failures And you need to configure other fault-injection capabilities for testing purpose: echo 100 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/probability echo 15 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/space echo 2 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/verbose echo -1 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/times The CONFIG_MTD_UBI_FAULT_INJECTION to enable the Fault Injection is added to kconfig. Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
The discard granularity now defaults to a single sector, so don't set that value explicitly. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/r/20231228075545.362768-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>