linux.git/drivers/mtd, branch v5.0-rc5

mtd: rawnand: denali: get ->setup_data_interface() working again

2019-01-18T09:27:01+00:00

Commit 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to
nand_controller_ops") missed to invert the if-conditonal for denali.
Since then, the Denali NAND driver cannnot invoke setup_data_interface.

Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops")
Signed-off-by: Masahiro Yamada 
Acked-by: Miquel Raynal 
Signed-off-by: Boris Brezillon

mtd: nand: jz4740: fix 'iomem ' vs. ' iomem'

2019-01-18T09:26:46+00:00

The function jz_nand_ioremap_resource() needs a pointer to an __iomem
pointer as its last argument but this argument is declared as:
	void * __iomem *base

Fix this by using the correct declaration:
	void __iomem **base
which then also removes the following Sparse's warnings:
  282:15: warning: incorrect type in assignment (different address spaces)
  282:15:    expected void *[noderef] 
  282:15:    got void [noderef]  *
  322:57: warning: incorrect type in argument 4 (different address spaces)
  322:57:    expected void *[noderef]  *base
  322:57:    got void [noderef]  **
  402:67: warning: incorrect type in argument 4 (different address spaces)
  402:67:    expected void *[noderef]  *base
  402:67:    got void [noderef]  **

Signed-off-by: Luc Van Oostenryck 
Acked-by: Miquel Raynal 
Signed-off-by: Boris Brezillon

mtd: rawnand: fsmc: Keep bank enable bit set

2019-01-15T17:29:53+00:00

Hammering the "bank enable" (PBKEN) bit on and off between
every command crashes the Nomadik NHK15 with this message:

Scanning device for bad blocks
Unhandled fault: external abort on non-linefetch (0x008) at 0xcc95e000
pgd = (ptrval)
[cc95e000] *pgd=0b808811, *pte=40000653, *ppte=40000552
Internal error: : 8 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.20.0-rc2+ #72
Hardware name: Nomadik STn8815
PC is at fsmc_exec_op+0x194/0x204
(...)

After a discussion we (me and Boris Brezillon) start to suspect
that this bit does not immediately control the chip select line
at all, it rather enables access to the bank and the hardware
will drive the CS autonomously. If there is a NAND chip connected,
we should keep this enabled.

As fsmc_nand_setup() sets this bit, we can simply remove the
offending code.

Fixes: 550b9fc4e3af ("mtd: rawnand: fsmc: Stop implementing ->select_chip()")
Signed-off-by: Linus Walleij 
Acked-by: Miquel Raynal 
Signed-off-by: Boris Brezillon

mtd: rawnand: qcom: fix memory corruption that causes panic

2019-01-08T11:33:24+00:00

This patch fixes a memory corruption that occurred in the
qcom-nandc driver since it was converted to nand_scan().

On boot, an affected device will panic from a NPE at a weird place:
| Unable to handle kernel NULL pointer dereference at virtual address 0
| pgd = (ptrval)
| [00000000] *pgd=00000000
| Internal error: Oops: 80000005 [#1] SMP ARM
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.9 #0
| Hardware name: Generic DT based system
| PC is at   (null)
| LR is at nand_block_isbad+0x90/0xa4
| pc : [<00000000>]    lr : []    psr: 80000013
| sp : cf839d40  ip : 00000000  fp : cfae9e20
| r10: cf815810  r9 : 00000000  r8 : 00000000
| r7 : 00000000  r6 : 00000000  r5 : 00000001  r4 : cf815810
| r3 : 00000000  r2 : cfae9810  r1 : ffffffff  r0 : cf815810
| Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
| Control: 10c5387d  Table: 8020406a  DAC: 00000051
| Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
| [] (nand_block_isbad) from []
| [] (allocate_partition) from []
| [] (add_mtd_partitions) from []
| [] (parse_mtd_partitions) from []
| [] (mtd_device_parse_register) from []
| [] (qcom_nandc_probe) from []

The problem is that the nand_scan()'s qcom_nand_attach_chip callback
is updating the nandc->max_cwperpage from 1 to 4. This causes the
sg_init_table of clear_bam_transaction() in the driver's
qcom_nandc_block_bad() to memset much more than what was initially
allocated by alloc_bam_transaction().

This patch restores the old behavior by reallocating the shared bam
transaction alloc_bam_transaction() after the chip was identified,
but before mtd_device_parse_register() (which is an alias for
mtd_device_register() - see panic) gets called. This fixes the
corruption and the driver is working again.

Cc: stable@vger.kernel.org
Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()")
Signed-off-by: Christian Lamparter 
Acked-by: Miquel Raynal 
Signed-off-by: Boris Brezillon

mtd: Check add_mtd_device() ret code

2019-01-07T13:06:24+00:00

add_mtd_device() can fail. We should always check its return value
and gracefully handle the failure case. Fix the call sites where this
not done (in mtdpart.c) and add a __must_check attribute to the
prototype to avoid this kind of mistakes.

Signed-off-by: Boris Brezillon

mtd: Fix the check on nvmem_register() ret code

2019-01-07T13:06:22+00:00

Commit 20167b70c894 ("nvmem: use EOPNOTSUPP instead of ENOSYS") changed
the nvmem_register() ret code from ENOSYS to EOPNOTSUPP when
CONFIG_NVMEM is not enabled, but the check in mtd_nvmem_add() was not
adjusted accordingly.

Cc: Bartosz Golaszewski 
Cc: Alban Bedel 
Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API")
Reported-by: kernel test robot 
Signed-off-by: Boris Brezillon 
Reviewed-by: Bartosz Golaszewski 
Signed-off-by: Boris Brezillon

Merge tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2018-12-29T20:03:17+00:00

Pull Kbuild updates from Masahiro Yamada:
 "Kbuild core:
   - remove unneeded $(call cc-option,...) switches
   - consolidate Clang compiler flags into CLANG_FLAGS
   - announce the deprecation of SUBDIRS
   - fix single target build for external module
   - simplify the dependencies of 'prepare' stage targets
   - allow fixdep to directly write to .*.cmd files
   - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS
   - change if_changed_rule to accept multi-line recipe
   - move .SECONDARY special target to scripts/Kbuild.include
   - remove redundant 'set -e'
   - improve parallel execution for CONFIG_HEADERS_CHECK
   - misc cleanups

  Treewide fixes and cleanups
   - set Clang flags correctly for PowerPC boot images
   - fix UML build error with CONFIG_GCC_PLUGINS
   - remove unneeded patterns from .gitignore files
   - refactor firmware/Makefile
   - remove unneeded rules for *offsets.s
   - avoid unneeded regeneration of intermediate .s files
   - clean up ./Kbuild

  Modpost:
   - remove unused -M, -K options
   - fix false positive warnings about section mismatch
   - use simple devtable lookup instead of linker magic
   - misc cleanups

  Coccinelle:
   - relax boolinit.cocci checks for overall consistency
   - fix warning messages of boolinit.cocci

  Other tools:
   - improve -dirty check of scripts/setlocalversion
   - add a tool to generate compile_commands.json from .*.cmd files"

* tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
  kbuild: remove unused cmd_gentimeconst
  kbuild: remove $(obj)/ prefixes in ./Kbuild
  treewide: add intermediate .s files to targets
  treewide: remove explicit rules for *offsets.s
  firmware: refactor firmware/Makefile
  firmware: remove unnecessary patterns from .gitignore
  scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore
  um: remove unused filechk_gen_header in Makefile
  scripts: add a tool to produce a compile_commands.json file
  kbuild: add -Werror=implicit-int flag unconditionally
  kbuild: add -Werror=strict-prototypes flag unconditionally
  kbuild: add -fno-PIE flag unconditionally
  scripts: coccinelle: Correct warning message
  scripts: coccinelle: only suggest true/false in files that already use them
  kbuild: handle part-of-module correctly for *.ll and *.symtypes
  kbuild: refactor part-of-module
  kbuild: refactor quiet_modtag
  kbuild: remove redundant quiet_modtag for $(obj-m)
  kbuild: refactor Makefile.asm-generic
  user/Makefile: Fix typo and capitalization in comment section
  ...

Merge tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2018-12-29T04:54:57+00:00

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char and misc driver patches for 4.21-rc1.

  Lots of different types of driver things in here, as this tree seems
  to be the "collection of various driver subsystems not big enough to
  have their own git tree" lately.

  Anyway, some highlights of the changes in here:

   - binderfs: is it a rule that all driver subsystems will eventually
     grow to have their own filesystem? Binder now has one to handle the
     use of it in containerized systems.

     This was discussed at the Plumbers conference a few months ago and
     knocked into mergable shape very fast by Christian Brauner. Who
     also has signed up to be another binder maintainer, showing a
     distinct lack of good judgement :)

   - binder updates and fixes

   - mei driver updates

   - fpga driver updates and additions

   - thunderbolt driver updates

   - soundwire driver updates

   - extcon driver updates

   - nvmem driver updates

   - hyper-v driver updates

   - coresight driver updates

   - pvpanic driver additions and reworking for more device support

   - lp driver updates. Yes really, it's _finally_ moved to the proper
     parallal port driver model, something I never thought I would see
     happen. Good stuff.

   - other tiny driver updates and fixes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits)
  MAINTAINERS: add another Android binder maintainer
  intel_th: msu: Fix an off-by-one in attribute store
  stm class: Add a reference to the SyS-T document
  stm class: Fix a module refcount leak in policy creation error path
  char: lp: use new parport device model
  char: lp: properly count the lp devices
  char: lp: use first unused lp number while registering
  char: lp: detach the device when parallel port is removed
  char: lp: introduce list to save port number
  bus: qcom: remove duplicated include from qcom-ebi2.c
  VMCI: Use memdup_user() rather than duplicating its implementation
  char/rtc: Use of_node_name_eq for node name comparisons
  misc: mic: fix a DMA pool free failure
  ptp: fix an IS_ERR() vs NULL check
  genwqe: Fix size check
  binder: implement binderfs
  binder: fix use-after-free due to ksys_close() during fdget()
  bus: fsl-mc: remove duplicated include files
  bus: fsl-mc: explicitly define the fsl_mc_command endianness
  misc: ti-st: make array read_ver_cmd static, shrinks object size
  ...

Merge tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2018-12-29T04:08:34+00:00

Pull Devicetree updates from Rob Herring:
 "The biggest highlight here is the start of using json-schema for DT
  bindings. Being able to validate bindings has been discussed for years
  with little progress.

   - Initial support for DT bindings using json-schema language. This is
     the start of converting DT bindings from free-form text to a
     structured format.

   - Reworking of initrd address initialization. This moves to using the
     phys address instead of virt addr in the DT parsing code. This
     rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
     rebuilding of lots of files.

   - Fix stale phandle entries in phandle cache

   - DT overlay validation improvements. This exposed several memory
     leak bugs which have been fixed.

   - Use node name and device_type helper functions in DT code

   - Last remaining conversions to using %pOFn printk specifier instead
     of device_node.name directly

   - Create new common RTC binding doc and move all trivial RTC devices
     out of trivial-devices.txt.

   - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
     PHY, and Xen shared memory

   - Update dtc to upstream version v1.4.7-57-gf267e674d145"

* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
  of: __of_detach_node() - remove node from phandle cache
  of: of_node_get()/of_node_put() nodes held in phandle cache
  gpio-omap.txt: add reg and interrupts properties
  dt-bindings: mrvl,intc: fix a trivial typo
  dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  dt-bindings: Convert trivial-devices.txt to json-schema
  dt-bindings: arm: mrvl: amend Browstone compatible string
  dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
  dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
  dt-bindings: arm: Add missing Xilinx boards
  dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
  dt-bindings: arm: Convert VIA board/soc bindings to json-schema
  dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
  dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
  dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
  dt-bindings: arm: Convert QCom board/soc bindings to json-schema
  dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
  dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
  dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
  dt-bindings: arm: Convert Altera board/soc bindings to json-schema
  ...

Merge tag 'spi-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2018-12-25T22:43:54+00:00

Pull spi updates from Mark Brown:
 "The main thing this release has been a lot of work on the integration
  with SPI NOR flashes, there's been some specific support for a while
  for controller features designed to make them perform better but it's
  not worked out as well as hoped so the interface has been redesigned
  in a way that will hopefully do better - it's already been adopted by
  a number of additional controllers so things are looking good.

  Otherwise most of the work has been driver specific:

   - Support for better integration with NOR flashes from Boris
     Brezillon and Yogesh Narayan Gaur plus usage of it in several
     drivers.

   - A big cleanup of the Rockchip driver from Emil Renner Berthing.

   - Lots of performance improvements for bcm2835 from Lukas Wunner.

   - Slave mode support for pxa2xx from Lubomir Rintel.

   - Support for Macronix MXIC, Mediatek MT7629 and MT8183, NPCM PSPI,
     and Renesas r8a77470"

* tag 'spi-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (90 commits)
  spi: sh-msiof: Reduce the number of times write to and perform the transmission from FIFO
  spi: sh-msiof: Add r8a774c0 support
  doc: lpspi: Document DT bindings for LPSPI slave mode
  spi: lpspi: Let watermark change with send data length
  spi: lpspi: Add slave mode support
  spi: lpspi: Replace all "master" with "controller"
  spi: imx: drop useless member speed_hz from driver data struct
  spi: imx: rename config callback and add useful parameters
  spi: imx: style fixes
  spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.
  spi: imx: add a device specific prepare_message callback
  mtd: atmel-quadspi: disallow building on ebsa110
  spi: Update NPCM PSPI controller documentation
  spi: npcm: Modify pspi send function
  spi: Use of_node_name_eq for node name comparisons
  spi: dw-mmio: add ACPI support
  spi: bcm2835: Synchronize with callback on DMA termination
  spi: bcm2835: Speed up FIFO access if fill level is known
  spi: bcm2835: Polish transfer of DMA prologue
  spi: spi-mem: add support for octal mode I/O data transfer
  ...