Pull UBIFS updates from Artem Bityutskiy:
 "This contains several UBIFS fixes.  One of them fixes a race condition
  between the mmap page fault path and fsync.  Another just removes a
  bogus assertion from the UBIFS memory shrinker.

  UBIFS also started honoring the MS_SILENT mount flag, so now it won't
  print many I/O errors when user-space just tries to probe for the FS.

  Rest of the changes are rather minor UBI/UBIFS fixes, improvements,
  and clean-ups"

* tag 'upstream-3.16-rc1-v2' of git://git.infradead.org/linux-ubifs:
  UBIFS: Add an assertion for clean_zn_cnt
  UBIFS: respect MS_SILENT mount flag
  UBIFS: Remove incorrect assertion in shrink_tnc()
  UBIFS: fix debugging check
  UBIFS: add missing ui pointer in debugging code
  UBI: block: Fix error path on alloc_workqueue failure
  UBIFS: Fix dump messages in ubifs_dump_lprops
  UBI: fix rb_tree node comparison in add_map
  UBIFS: Remove unused variables in ubifs_budget_space
  UBI: weaken the 'exclusive' constraint when opening volumes to rename
  UBIFS: fix an mmap and fsync race condition

Pull block core updates from Jens Axboe:
 "It's a big(ish) round this time, lots of development effort has gone
  into blk-mq in the last 3 months.  Generally we're heading to where
  3.16 will be a feature complete and performant blk-mq.  scsi-mq is
  progressing nicely and will hopefully be in 3.17.  A nvme port is in
  progress, and the Micron pci-e flash driver, mtip32xx, is converted
  and will be sent in with the driver pull request for 3.16.

  This pull request contains:

   - Lots of prep and support patches for scsi-mq have been integrated.
     All from Christoph.

   - API and code cleanups for blk-mq from Christoph.

   - Lots of good corner case and error handling cleanup fixes for
     blk-mq from Ming Lei.

   - A flew of blk-mq updates from me:

     * Provide strict mappings so that the driver can rely on the CPU
       to queue mapping.  This enables optimizations in the driver.

     * Provided a bitmap tagging instead of percpu_ida, which never
       really worked well for blk-mq.  percpu_ida relies on the fact
       that we have a lot more tags available than we really need, it
       fails miserably for cases where we exhaust (or are close to
       exhausting) the tag space.

     * Provide sane support for shared tag maps, as utilized by scsi-mq

     * Various fixes for IO timeouts.

     * API cleanups, and lots of perf tweaks and optimizations.

   - Remove 'buffer' from struct request.  This is ancient code, from
     when requests were always virtually mapped.  Kill it, to reclaim
     some space in struct request.  From me.

   - Remove 'magic' from blk_plug.  Since we store these on the stack
     and since we've never caught any actual bugs with this, lets just
     get rid of it.  From me.

   - Only call part_in_flight() once for IO completion, as includes two
     atomic reads.  Hopefully we'll get a better implementation soon, as
     the part IO stats are now one of the more expensive parts of doing
     IO on blk-mq.  From me.

   - File migration of block code from {mm,fs}/ to block/.  This
     includes bio.c, bio-integrity.c, bounce.c, and ioprio.c.  From me,
     from a discussion on lkml.

  That should describe the meat of the pull request.  Also has various
  little fixes and cleanups from Dave Jones, Shaohua Li, Duan Jiong,
  Fengguang Wu, Fabian Frederick, Randy Dunlap, Robert Elliott, and Sam
  Bradshaw"

* 'for-3.16/core' of git://git.kernel.dk/linux-block: (100 commits)
  blk-mq: push IPI or local end_io decision to __blk_mq_complete_request()
  blk-mq: remember to start timeout handler for direct queue
  block: ensure that the timer is always added
  blk-mq: blk_mq_unregister_hctx() can be static
  blk-mq: make the sysfs mq/ layout reflect current mappings
  blk-mq: blk_mq_tag_to_rq should handle flush request
  block: remove dead code in scsi_ioctl:blk_verify_command
  blk-mq: request initialization optimizations
  block: add queue flag for disabling SG merging
  block: remove 'magic' from struct blk_plug
  blk-mq: remove alloc_hctx and free_hctx methods
  blk-mq: add file comments and update copyright notices
  blk-mq: remove blk_mq_alloc_request_pinned
  blk-mq: do not use blk_mq_alloc_request_pinned in blk_mq_map_request
  blk-mq: remove blk_mq_wait_for_tags
  blk-mq: initialize request in __blk_mq_alloc_request
  blk-mq: merge blk_mq_alloc_reserved_request into blk_mq_alloc_request
  blk-mq: add helper to insert requests from irq context
  blk-mq: remove stale comment for blk_mq_complete_request()
  blk-mq: allow non-softirq completions
  ...

Otherwise we'd return a random value if allocation of the workqueue fails.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

The comparisons used in add_vol() shouldn't be identical.  Pretty sure
the following is correct but it is completely untested.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

The UBI volume rename ioctl (UBI_IOCRNVOL) open the volumes in exclusive
mode. The volumes are opened for two reasons: to build a volume rename list,
and a volume remove list.

However, the first open constraint is excessive and can be replaced by
a 'read-write' open mode. The second open constraint is properly set as
'exclusive' given the volume is opened for removal and we don't want any
users around.

By weakening the former 'exclusive' mode, we allow 'read-only' users to keep
the volume open, while a rename is taking place. This is useful to perform
an atomic rename, in a firmware upgrade scenario, while keeping the volume
in read-only use (for instance, if a ubiblock is mounted as rootfs).

It's worth mention this is not the case of UBIFS, which keeps the volume
opened as 'read-write' despite mounted as read-write or read-only mode.

This change was suggested at least twice by Artem:
http://lists.infradead.org/pipermail/linux-mtd/2012-September/044175.html
http://permalink.gmane.org/gmane.linux.drivers.mtd/39866

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

When building the name for the workqueue thread, make sure a format
string cannot leak in from the disk name.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

The ubi->free_count should be updated with every insert/remove to/from
the ubi->free list.

Signed-off-by: Tanya Brokhman <tlinder@codeaurora.org>
Reviewed-by: Dolev Raviv <draviv@codeaurora.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

In case of an error (if there are not free PEB's for example),
__wl_get_peb will return a negative value. In order to prevent access
violation we need to test the returned value prior to using it later on.

Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Reviewed-by: Dolev Raviv <draviv@codeaurora.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

This was used in the olden days, back when onions were proper
yellow. Basically it mapped to the current buffer to be
transferred. With highmem being added more than a decade ago,
most drivers map pages out of a bio, and rq->buffer isn't
pointing at anything valid.

Convert old style drivers to just use bio_data().

For the discard payload use case, just reference the page
in the bio.

Signed-off-by: Jens Axboe <axboe@fb.com>

Pull MTD updates from Brian Norris:
 - A few SPI NOR ID definitions
 - Kill the NAND "max pagesize" restriction
 - Fix some x16 bus-width NAND support
 - Add NAND JEDEC parameter page support
 - DT bindings for NAND ECC
 - GPMI NAND updates (subpage reads)
 - More OMAP NAND refactoring
 - New STMicro SPI NOR driver (now in 40 patches!)
 - A few other random bugfixes

* tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits)
  Fix index regression in nand_read_subpage
  mtd: diskonchip: mem resource name is not optional
  mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH
  mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
  mtd: omap2: Use devm_ioremap_resource()
  mtd: denali_dt: Use devm_ioremap_resource()
  mtd: devices: elm: update DRIVER_NAME as "omap-elm"
  mtd: devices: elm: configure parallel channels based on ecc_steps
  mtd: devices: elm: clean elm_load_syndrome
  mtd: devices: elm: check for hardware engine's design constraints
  mtd: st_spi_fsm: Succinctly reorganise .remove()
  mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU
  mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M"
  mtd: st_spi_fsm: Avoid duplicating MTD core code
  mtd: st_spi_fsm: Remove useless consts from function arguments
  mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions
  mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct
  mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back
  ...