Remove hard-coded strings by using the str_enable_disable() helper
function.

Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based kernel configuration guards.

Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

The Fujitsu FRAM chips use the same command set as Microchip EERAM.
The only differences are that the Fujitsu FRAM chips don't really have a
page size limit, nor do they automatically reset the WEL bit.

Signed-off-by: David Jander <david@protonic.nl>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

The 48L640 resets the WEL bit (the Write Enable Latch bit in the status
register) to zero on the completion of write operations. In preparation
to support chips behaving differently, introduce .auto_disable_wel
capability, and, if it's missing, explicitly reset the WEL bit after
writes.

Signed-off-by: David Jander <david@protonic.nl>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

The phram MTD driver may map any memory pages no matter whether it's
reserved or whatever used for systems, which basically allows user
bypassing the lock down.

Add the check and abort the probe if the kernel is locked down for
LOCKDOWN_DEV_MEM.

Reported-by: Fabian Vogt <fvogt@suse.com>
Suggested-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

The check on ret and call to platform_driver_unregister is only required
in the code path where MODULE is not defined. Fix this by moving this
code into the relevant place after the call to phram_setup.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/mtd to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20241007205803.444994-10-u.kleine-koenig@baylibre.com

devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked.

Fixes: acfe63ec1c59 ("mtd: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240828092427.128177-1-hanchunchao@inspur.com

GCC 12.3.0 compiler on linux-next next-20240709 tree found the execution
path in which, due to lazy evaluation, devlength isn't initialised with the
parsed string:

   289		while (map) {
   290			devname = devstart = devlength = NULL;
   291
   292			if (!(devname = strsep(&map, ","))) {
   293				E("slram: No devicename specified.\n");
   294				break;
   295			}
   296			T("slram: devname = %s\n", devname);
   297			if ((!map) || (!(devstart = strsep(&map, ",")))) {
   298				E("slram: No devicestart specified.\n");
   299			}
   300			T("slram: devstart = %s\n", devstart);
 → 301			if ((!map) || (!(devlength = strsep(&map, ",")))) {
   302				E("slram: No devicelength / -end specified.\n");
   303			}
 → 304			T("slram: devlength = %s\n", devlength);
   305			if (parse_cmdline(devname, devstart, devlength) != 0) {
   306				return(-EINVAL);
   307			}

Parsing should be finished after map == NULL, so a break is best inserted after
each E("slram: ... \n") error message.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240711234319.637824-1-mtodorovac69@gmail.com

Pull bdev bd_inode updates from Al Viro:
 "Replacement of bdev->bd_inode with sane(r) set of primitives by me and
  Yu Kuai"

* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RIP ->bd_inode
  dasd_format(): killing the last remaining user of ->bd_inode
  nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
  block/bdev.c: use the knowledge of inode/bdev coallocation
  gfs2: more obvious initializations of mapping->host
  fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
  blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
  grow_dev_folio(): we only want ->bd_inode->i_mapping there
  use ->bd_mapping instead of ->bd_inode->i_mapping
  block_device: add a pointer to struct address_space (page cache of bdev)
  missing helpers: bdev_unhash(), bdev_drop()
  block: move two helpers into bdev.c
  block2mtd: prevent direct access of bd_inode
  dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
  blkdev_write_iter(): saner way to get inode and bdev
  bcachefs: remove dead function bdev_sectors()
  ext4: remove block_device_ejected()
  erofs_buf: store address_space instead of inode
  erofs: switch erofs_bread() to passing offset instead of block number