linux.git/drivers/mtd/devices, branch v2.6.33

Merge git://git.infradead.org/mtd-2.6

2009-12-16T18:23:43+00:00

* git://git.infradead.org/mtd-2.6: (90 commits)
  jffs2: Fix long-standing bug with symlink garbage collection.
  mtd: OneNAND: Fix test of unsigned in onenand_otp_walk()
  mtd: cfi_cmdset_0002, fix lock imbalance
  Revert "mtd: move mxcnd_remove to .exit.text"
  mtd: m25p80: add support for Macronix MX25L4005A
  kmsg_dump: fix build for CONFIG_PRINTK=n
  mtd: nandsim: add support for 4KiB pages
  mtd: mtdoops: refactor as a kmsg_dumper
  mtd: mtdoops: make record size configurable
  mtd: mtdoops: limit the maximum mtd partition size
  mtd: mtdoops: keep track of used/unused pages in an array
  mtd: mtdoops: several minor cleanups
  core: Add kernel message dumper to call on oopses and panics
  mtd: add ARM pismo support
  mtd: pxa3xx_nand: Fix PIO data transfer
  mtd: nand: fix multi-chip suspend problem
  mtd: add support for switching old SST chips into QRY mode
  mtd: fix M29W800D dev_id and uaddr
  mtd: don't use PF_MEMALLOC
  mtd: Add bad block table overrides to Davinci NAND driver
  ...

Fixed up conflicts (mostly trivial) in
	drivers/mtd/devices/m25p80.c
	drivers/mtd/maps/pcmciamtd.c
	drivers/mtd/nand/pxa3xx_nand.c
	kernel/printk.c

mtd: m25p80: add support for Macronix MX25L4005A

2009-12-05T16:05:09+00:00

Signed-off-by: Simon Guinot 
Signed-off-by: David Woodhouse

tree-wide: fix assorted typos all over the place

2009-12-04T14:39:55+00:00

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa 
Signed-off-by: Jiri Kosina

mtd: m25p80: Add support for CAT25xxx serial EEPROMs

2009-11-30T11:29:00+00:00

CAT25 chips (as manufactured by On Semiconductor, previously Catalyst
Semiconductor) are similar to the original M25Px0 chips, except:

- Address width can vary (1-2 bytes, in contrast to 3 bytes in M25P
  chips). So, implement convenient m25p_addr2cmd() and m25p_cmdsz()
  calls, and place address width information into flash_info struct;

- Page size can vary, therefore we shouldn't hardcode it, so get rid
  of FLASH_PAGESIZE definition, and place the page size information
  into flash_info struct;

- CAT25 EEPROMs don't need to be erased, so add NO_ERASE flag, and
  propagate it to the mtd subsystem.

[dwmw2: Fix up for conflicts with DMA safety patch]
Signed-off-by: Anton Vorontsov 
Signed-off-by: David Woodhouse

mtd: m25p80: Rework probing/JEDEC code

2009-11-30T11:26:15+00:00

Previosly the driver always tried JEDEC probing, assuming that non-JEDEC
chips will return '0'. But truly non-JEDEC chips (like CAT25) won't do
that, their behaviour on RDID command is undefined, so the driver should
not call jedec_probe() for these chips.

Also, be less strict on error conditions, don't fail to probe if JEDEC
found a chip that is different from what platform code told, instead
just print some warnings and use an information obtained via JEDEC. In
that case we should not trust partitions any longer, but they might be
still useful (i.e. they could protect some parts of the chip).

Signed-off-by: Anton Vorontsov 
Signed-off-by: David Woodhouse

mtd: m25p80: Convert to device table matching

2009-11-30T11:26:08+00:00

This patch converts the m25p80 driver so that now it uses .id_table
for device matching, making it properly detect devices on OpenFirmware
platforms (prior to this patch the driver misdetected non-JEDEC chips,
seeing all chips as "m25p80").

Also, now jedec_probe() only does jedec probing, nothing else. If it
is not able to detect a chip, NULL is returned and the driver fall
backs to the information specified by the platform (platform_data, or
exact ID).

Signed-off-by: Anton Vorontsov 
Signed-off-by: David Woodhouse

mtd: m25p80: make command buffer DMA-safe

2009-11-30T09:49:52+00:00

spi_write() requires the buffer to be DMA-safe, kmalloc()
it seperately to ensure this.

Signed-off-by: Johannes Stezenbach 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: David Woodhouse

Kconfig: Remove useless and sometimes wrong comments

2009-11-09T08:40:56+00:00

Additionally, some excessive newlines removed.

Signed-off-by: Michael Roth 
Signed-off-by: Jiri Kosina

mtd: fix memory leak in mtd_dataflash

2009-10-17T14:41:11+00:00

Fix a potential memory leak in mtd_dataflash driver.

The private data that is allocated when registering a DataFlash
device with the MTD subsystem is not released if an error occurs
when add_mtd_partitions() or add_mtd_device() is called.  Fix this
by adding an error path.  The memory is already released during a
remove.

Also, add a dev_set_drvdata(&spi->dev, NULL) before the kfree() so
that the spi device does not reference invalid data.

Signed-off-by: H Hartley Sweeten 
Cc: David Brownell 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: David Woodhouse

headers: remove sched.h from interrupt.h

2009-10-11T18:20:58+00:00

After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan