Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.5-rc1

  There's a few minor cleanups and fixes in here, but the majority of
  the patches in here fall into two buckets:

   - debugfs api cleanups and fixes

   - driver core device link support for boot dependancy issues

  The debugfs api cleanups are working to slowly refactor the debugfs
  apis so that it is even harder to use incorrectly. That work has been
  happening for the past few kernel releases and will continue over
  time, it's a long-term project/goal

  The driver core device link support missed 5.4 by just a bit, so it's
  been sitting and baking for many months now. It's from Saravana Kannan
  to help resolve the problems that DT-based systems have at boot time
  with dependancy graphs and kernel modules. Turns out that no one has
  actually tried to build a generic arm64 kernel with loads of modules
  and have it "just work" for a variety of platforms (like a distro
  kernel). The big problem turned out to be a lack of dependency
  information between different areas of DT entries, and the work here
  resolves that problem and now allows devices to boot properly, and
  quicker than a monolith kernel.

  All of these patches have been in linux-next for a long time with no
  reported issues"

* tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits)
  tracing: Remove unnecessary DEBUG_FS dependency
  of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
  debugfs: Fix !DEBUG_FS debugfs_create_automount
  of: property: Add device link support for "iommu-map"
  of: property: Fix the semantics of of_is_ancestor_of()
  i2c: of: Populate fwnode in of_i2c_get_board_info()
  drivers: base: Fix Kconfig indentation
  firmware_loader: Fix labels with comma for builtin firmware
  driver core: Allow device link operations inside sync_state()
  driver core: platform: Declare ret variable only once
  cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h>
  crypto: hisilicon: no need to check return value of debugfs_create functions
  driver core: platform: use the correct callback type for bus_find_device
  firmware_class: make firmware caching configurable
  driver core: Clarify documentation for fwnode_operations.add_links()
  mailbox: tegra: Fix superfluous IRQ error message
  net: caif: Fix debugfs on 64-bit platforms
  mac80211: Use debugfs_create_xul() helper
  media: c8sectpfe: no need to check return value of debugfs_create functions
  of: property: Add device link support for iommus, mboxes and io-channels
  ...

Pull MMC updates from Ulf Hansson:
 "These are the updates for MMC and MEMSTICK for v5.5.

  Note that this also contains quite some additional changes reaching
  beyond both the MMC and MEMSTICK subsystems. This is primarily because
  of fixing an old regression for a WiFi driver based on the SDIO
  interface on an OMAP openpandora board

  MMC core:
   - Add CMD13 polling for MMC IOCTLS with R1B response.
   - Add common DT properties for clk-phase-delays for various speed
     modes.
   - Fix size overflow for mmc gp-partitions.
   - Re-work HW reset for SDIO cards, which also includes a re-work for
     Marvell's WiFi mwifiex SDIO func driver.

  MMC host:
   - jz4740: Add support for X1000 and JZ4760.
   - jz4740: Add support for 8-bit bus and for low power mode.
   - mmci: Add support for HW busy timeout for the stm32_sdmmc variant.
   - owl-mmc: Add driver for Actions Semi Owl SoCs SD/MMC controller.
   - renesas_sdhi: Add support for r8a774b1.
   - sdhci_am654: Add support for Command Queuing Engine for J721E.
   - sdhci-milbeaut: Add driver for the Milbeaut SD controller.
   - sdhci-of-arasan: Add support for ZynqMP tap-delays.
   - sdhci-of-arasan: Add support for clk-phase-delays for SD cards.
   - sdhci-of-arasan: Add support for Intel LGM SDXC.
   - sdhci-of-aspeed: Allow inversion of the internal card detect
     signal.
   - sdhci-of-esdhc: Fixup workaround for erratum A-008171 for tunings.
   - sdhci-of-at91: Improve support for calibration.
   - sdhci-pci: Add support for Intel JSL.
   - sdhci-pci: Add quirk for AMD SDHC Device 0x7906.
   - tmio: Enable support for erase/discard/trim requests.

  MMC/OMAP/pandora/wl1251:

  The TI wl1251 WiFi driver for SDIO on the OMAP openpandora board has
  been broken since v4.7. To fix the problems, changes have been made
  cross subsystems, but also to OMAP2 machine code and to openpandora
  DTS files, as summarized below. Relevant changes have been tagged for
  stable.

   - mmc/wl1251: Re-introduce lost SDIO quirks and vendor-id for wl1251
   - omap/omap_hsmmc: Remove redundant platform config for openpandora
   - omap_hsmmc: Initialize non-std SDIO card for wl1251 for pandora
   - omap/dts/pandora: Specify wl1251 through a child node of mmc3
   - wl1251: Add devicetree support for TI wl1251 SDIO"

* tag 'mmc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (73 commits)
  dt-bindings: mmc: Correct the type of the clk phase properties
  Revert "mmc: tmio: remove workaround for NON_REMOVABLE"
  memstick: Fix Kconfig indentation
  mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup
  dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller
  firmware: xilinx: Add SDIO Tap Delay nodes
  mmc: sdhci-of-arasan: Add support to set clock phase delays for SD
  dt-bindings: mmc: Add optional generic properties for mmc
  mmc: sdhci-of-arasan: Add sampling clock for a phy to use
  dt-bindings: mmc: arasan: Update Documentation for the input clock
  mmc: sdhci-of-arasan: Separate out clk related data to another structure
  mmc: sdhci: Fix grammar in warning message
  mmc: sdhci-of-aspeed: add inversion signal presence
  mmc: sdhci-of-aspeed: enable CONFIG_MMC_SDHCI_IO_ACCESSORS
  mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E
  mmc: core: Fix size overflow for mmc partitions
  mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requests
  net: wireless: ti: remove local VENDOR_ID and DEVICE_ID definitions
  net: wireless: ti: wl1251 use new SDIO_VENDOR_ID_TI_WL1251 definition
  mmc: core: fix wl1251 sdio quirks
  ...

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20191018, add support for EFI specific purpose memory, update the ACPI
  EC driver to make it work on systems with hardware-reduced ACPI,
  improve ACPI-based device enumeration for some platforms, rework the
  lid blacklist handling in the button driver and add more lid quirks to
  it, unify ACPI _HID/_UID matching, fix assorted issues and clean up
  the code and documentation.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20191018
     including:
      * Fixes for Clang warnings (Bob Moore)
      * Fix for possible overflow in get_tick_count() (Bob Moore)
      * Introduction of acpi_unload_table() (Bob Moore)
      * Debugger and utilities updates (Erik Schmauss)
      * Fix for unloading tables loaded via configfs (Nikolaus Voss)

   - Add support for EFI specific purpose memory to optionally allow
     either application-exclusive or core-kernel-mm managed access to
     differentiated memory (Dan Williams)

   - Fix and clean up processing of the HMAT table (Brice Goglin, Qian
     Cai, Tao Xu)

   - Update the ACPI EC driver to make it work on systems with
     hardware-reduced ACPI (Daniel Drake)

   - Always build in support for the Generic Event Device (GED) to allow
     one kernel binary to work both on systems with full hardware ACPI
     and hardware-reduced ACPI (Arjan van de Ven)

   - Fix the table unload mechanism to unregister platform devices
     created when the given table was loaded (Andy Shevchenko)

   - Rework the lid blacklist handling in the button driver and add more
     lid quirks to it (Hans de Goede)

   - Improve ACPI-based device enumeration for some platforms based on
     Intel BayTrail SoCs (Hans de Goede)

   - Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC and
     prevent handlers from being registered for unhandled PMIC OpRegions
     (Hans de Goede)

   - Unify ACPI _HID/_UID matching (Andy Shevchenko)

   - Clean up documentation and comments (Cao jin, James Pack, Kacper
     Piwiński)"

* tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
  ACPI: OSI: Shoot duplicate word
  ACPI: HMAT: use %u instead of %d to print u32 values
  ACPI: NUMA: HMAT: fix a section mismatch
  ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm
  ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device
  ACPI: NUMA: HMAT: Register HMAT at device_initcall level
  device-dax: Add a driver for "hmem" devices
  dax: Fix alloc_dax_region() compile warning
  lib: Uplevel the pmem "region" ida to a global allocator
  x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP
  arm/efi: EFI soft reservation to memblock
  x86/efi: EFI soft reservation to E820 enumeration
  efi: Common enable/disable infrastructure for EFI soft reservation
  x86/efi: Push EFI_MEMMAP check into leaf routines
  efi: Enumerate EFI_MEMORY_SP
  ACPI: NUMA: Establish a new drivers/acpi/numa/ directory
  ACPICA: Update version to 20191018
  ACPICA: debugger: remove leading whitespaces when converting a string to a buffer
  ACPICA: acpiexec: initialize all simple types and field units from user input
  ACPICA: debugger: add field unit support for acpi_db_get_next_token
  ...

* acpi-utils:
  iommu/amd: Switch to use acpi_dev_hid_uid_match()
  mmc: sdhci-acpi: Switch to use acpi_dev_hid_uid_match()
  ACPI / LPSS: Switch to use acpi_dev_hid_uid_match()
  ACPI / utils: Introduce acpi_dev_hid_uid_match() helper
  ACPI / utils: Move acpi_dev_get_first_match_dev() under CONFIG_ACPI
  ACPI / utils: Describe function parameters in kernel-doc

* acpi-platform:
  ACPI: platform: Unregister stale platform devices
  ACPI: Always build evged in

* acpi-video:
  ACPI: video: update doc for acpi_video_bus_DOS()

* acpi-doc:
  ACPI: Documentation: Minor spelling fix in namespace.rst

* pm-sleep:
  PM / wakeirq: remove unnecessary parentheses
  PM / core: Clean up some function headers in power.h
  PM / hibernate: memory_bm_find_bit(): Tighten node optimisation

* pm-domains:
  PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
  mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
  PM / Domains: Implement the ->start() callback for genpd
  PM / Domains: Introduce dev_pm_domain_start()

* pm-opp:
  PM / OPP: Support adjusting OPP voltages at runtime

* powercap:
  powercap/intel_rapl: add support for Cometlake desktop
  powercap/intel_rapl: add support for CometLake Mobile

This reverts commit 7a7dab237027939cb95dc07c4647b80bad5fbbde. We found
out that there is still a race with RuntimePM. This can lead to a hang
when accessing the eMMC in some situations. Revert this change until the
RPM issue is fixed.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Apart from taps set by auto tuning, ZynqMP platform has feature to set
the tap values manually. Add support to set tap delay values in HW via
ZynqMP SoC framework.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add support to read Clock Phase Delays from the DT and set it via
clk_set_phase() API from clock framework. Some of the controllers might
have their own handling of setting clock delays, for this keep the
set_clk_delays as function pointer which can be assigned controller
specific handling of the same.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

There are some operations like setting the clock delays may need to have
two clocks, one for output path and one for input path. Adding input
path clock for some phys to use.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

To improve the code readability, use two different structs, one for
clock provider data and one for mmc platform data.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>