linux.git/drivers/mmc, branch v3.0-rc2

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

2011-05-28T02:51:32+00:00

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
  ARM: 6945/1: Add unwinding support for division functions
  ARM: kill pmd_off()
  ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks
  ARM: 6943/1: mm: use TTBR1 instead of reserved context ID
  ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7
  ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area
  ARM: add sendmmsg syscall
  ARM: 6863/1: allow hotplug on msm
  ARM: 6832/1: mmci: support for ST-Ericsson db8500v2
  ARM: 6830/1: mach-ux500: force PrimeCell revisions
  ARM: 6829/1: amba: make hardcoded periphid override hardware
  ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID
  ARM: 6827/1: mach-netx: delete hardcoded periphid
  ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume
  ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2
  ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM
  ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM
  at91: drop at572d940hf support
  at91rm9200: introduce at91rm9200_set_type to specficy cpu package
  at91: drop boot_params and PLAT_PHYS_OFFSET
  ...

mmc: Use device platform_data to retrieve tmio_mmc platform bits

2011-05-26T17:44:59+00:00

With the addition of the platform device mfd_cell pointer, we can now
cleanly pass the sub device drivers platform data pointers through the
regular device platform_data one, and get rid of mfd_get_data()

Cc: Ian Molton 
Cc: Guennadi Liakhovetski 
Cc: Philipp Zabel 
Acked-by: Dmitry Eremin-Solenikov 
Signed-off-by: Samuel Ortiz

ARM: 6832/1: mmci: support for ST-Ericsson db8500v2

2011-05-26T09:33:35+00:00

ST-Ericsson modified ARM PrimeCell PL180 block has not got
an updated corresponding amba-id, althought the IP block has
changed in db8500v2. The change was done to the datactrl register.
Using the overrided subversion ID, account for this.

Signed-off-by: Philippe Langlais 
Signed-off-by: Linus Walleij 
Signed-off-by: Russell King

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

2011-05-25T23:55:55+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (75 commits)
  mmc: core: eMMC bus width may not work on all platforms
  mmc: sdhci: Auto-CMD23 fixes.
  mmc: sdhci: Auto-CMD23 support.
  mmc: core: Block CMD23 support for UHS104/SDXC cards.
  mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI.
  mmc: core: Use CMD23 for multiblock transfers when we can.
  mmc: quirks: Add/remove quirks conditional support.
  mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver
  mmc: sdhci-pxa: Add quirks for DMA/ADMA to match h/w
  mmc: core: duplicated trial with same freq in mmc_rescan_try_freq()
  mmc: core: add support for eMMC Dual Data Rate
  mmc: core: eMMC signal voltage does not use CMD11
  mmc: sdhci-pxa: add platform code for UHS signaling
  mmc: sdhci: add hooks for setting UHS in platform specific code
  mmc: core: clear MMC_PM_KEEP_POWER flag on resume
  mmc: dw_mmc: fixed wrong regulator_enable in suspend/resume
  mmc: sdhi: allow powering down controller with no card inserted
  mmc: tmio: runtime suspend the controller, where possible
  mmc: sdhi: support up to 3 interrupt sources
  mmc: sdhi: print physical base address and clock rate
  ...

mmc: core: eMMC bus width may not work on all platforms

2011-05-25T20:52:32+00:00

CMD19 -- The offical way to validate bus widths from the JEDEC spec
does not work on all platforms.  Some platforms that use PCI/PCIe
to connect their SD controllers are known to fail.

If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out
the bus width by reading the ext_csd at different bus widths and
compare this against the ext_csd read in 1 bit mode.  If no ext_csd
is available we default to 1 bit operations.

Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB
card that is known to not work in 4 bit mode.  The physical pins
on the card are not present to support 4 bit operation.

Signed-off-by: Philip Rakity 
Signed-off-by: Chris Ball

mmc: sdhci: Auto-CMD23 fixes.

2011-05-25T20:52:26+00:00

Fixes bugs in Auto-CMD23 feature enable decision. Auto-CMD23
should be enabled if host is >= v3, and SDMA is not in use.

USE_ADMA | USE_SDMA | Auto-CMD23
---------+----------+-----------
    0    |    0     |     1
---------+----------+-----------
    0    |    1     |     0
---------+----------+-----------
    1    |    0     |     1
---------+----------+-----------
    1    |    1     |     1

Signed-off-by: Andrei Warkentin 
Signed-off-by: Chris Ball

mmc: sdhci: Auto-CMD23 support.

2011-05-25T20:51:40+00:00

Enables Auto-CMD23 support where available (SDHCI 3.0 controllers)

Signed-off-by: Andrei Warkentin 
Tested-by: Arindam Nath 
Signed-off-by: Chris Ball

mmc: core: Block CMD23 support for UHS104/SDXC cards.

2011-05-25T20:49:03+00:00

SD cards operating at UHS104 or better support SET_BLOCK_COUNT.

Signed-off-by: Andrei Warkentin 
Reviewed-by: Arindam Nath 
Signed-off-by: Chris Ball

mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI.

2011-05-25T20:49:00+00:00

Implements support for multiblock transfers bounded
by SET_BLOCK_COUNT (CMD23).

Signed-off-by: Andrei Warkentin 
Signed-off-by: Chris Ball

mmc: core: Use CMD23 for multiblock transfers when we can.

2011-05-25T20:48:46+00:00

CMD23-prefixed instead of open-ended multiblock transfers
have a performance advantage on some MMC cards.

Signed-off-by: Andrei Warkentin 
Signed-off-by: Chris Ball