linux.git/drivers/mmc/host, branch v4.19 Linux kernel source tree mmc: sdhi: sys_dmac: check for all Gen3 types when whitelisting 2018-09-17T18:15:40+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2018-09-11T13:06:26+00:00 2ea15030c3f0554db695f85e4760da8621c183d3 Fixes: 26eb2607fa28 ("mmc: renesas_sdhi: add eMMC HS400 mode support") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Fixes: 26eb2607fa28 ("mmc: renesas_sdhi: add eMMC HS400 mode support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: meson-mx-sdio: fix OF child-node lookup 2018-09-05T06:28:45+00:00 Johan Hovold johan@kernel.org 2018-08-27T08:21:48+00:00 c483a5cc9d09f4ceaa9abb106f863cc89cb643d9 Use the new of_get_compatible_child() helper to lookup the slot child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). While at it, also fix up the related slot-node reference leak. Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs") Cc: stable <stable@vger.kernel.org> # 4.15 Cc: Carlo Caione <carlo@endlessm.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Use the new of_get_compatible_child() helper to lookup the slot child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the node of the device being probed).

While at it, also fix up the related slot-node reference leak.

Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Cc: stable <stable@vger.kernel.org>     # 4.15
Cc: Carlo Caione <carlo@endlessm.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: omap_hsmmc: fix wakeirq handling on removal 2018-09-04T14:28:43+00:00 Andreas Kemnade andreas@kemnade.info 2018-09-02T07:30:58+00:00 3c398f3c3bef21961eaaeb93227fa66d440dc83d after unbinding mmc I get things like this: [ 185.294067] mmc1: card 0001 removed [ 185.305206] omap_hsmmc 480b4000.mmc: wake IRQ with no resume: -13 The wakeirq stays in /proc-interrupts rebinding shows this: [ 289.795959] genirq: Flags mismatch irq 112. 0000200a (480b4000.mmc:wakeup) vs. 0000200a (480b4000.mmc:wakeup) [ 289.808959] omap_hsmmc 480b4000.mmc: Unable to request wake IRQ [ 289.815338] omap_hsmmc 480b4000.mmc: no SDIO IRQ support, falling back to polling That bug seems to be introduced by switching from devm_request_irq() to generic wakeirq handling. So let us cleanup at removal. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Fixes: 5b83b2234be6 ("mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
after unbinding mmc I get things like this:
[  185.294067] mmc1: card 0001 removed
[  185.305206] omap_hsmmc 480b4000.mmc: wake IRQ with no resume: -13

The wakeirq stays in /proc-interrupts

rebinding shows this:
[  289.795959] genirq: Flags mismatch irq 112. 0000200a (480b4000.mmc:wakeup) vs. 0000200a (480b4000.mmc:wakeup)
[  289.808959] omap_hsmmc 480b4000.mmc: Unable to request wake IRQ
[  289.815338] omap_hsmmc 480b4000.mmc: no SDIO IRQ support, falling back to polling

That bug seems to be introduced by switching from devm_request_irq()
to generic wakeirq handling.

So let us cleanup at removal.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 5b83b2234be6 ("mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: renesas_sdhi_internal_dmac: mask DMAC interrupts 2018-08-23T08:00:49+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2018-08-22T18:22:26+00:00 d2332f887ddfba50fee93b8e1736376517c2df0c I have encountered an interrupt storm during the eMMC chip probing (and the chip finally didn't get detected). It turned out that U-Boot left the SDHI DMA interrupts enabled while the Linux driver didn't use those. Masking those interrupts in renesas_sdhi_internal_dmac_request_dma() gets rid of both issues... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
I have encountered an interrupt storm during the eMMC chip probing (and
the chip finally didn't get detected).  It turned out that U-Boot left
the SDHI DMA interrupts enabled while the Linux driver didn't use those.
Masking those interrupts in renesas_sdhi_internal_dmac_request_dma() gets
rid of both issues...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: renesas_sdhi_internal_dmac: fix #define RST_RESERVED_BITS 2018-08-23T07:58:12+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2018-08-22T18:28:01+00:00 9faf870e559a710c44e747ba20383ea82d8ac5d2 The DM_CM_RST register actually has bits 0-31 defaulting to 1s and bits 32-63 defaulting to 0s -- fix off-by-one in #define RST_RESERVED_BITS. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
The DM_CM_RST register actually has bits 0-31 defaulting to 1s and bits
32-63 defaulting to 0s -- fix off-by-one in #define RST_RESERVED_BITS.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: android-goldfish: fix bad logic of sg_copy_{from,to}_buffer conversion 2018-08-21T14:06:17+00:00 Ludovic Desroches ludovic.desroches@microchip.com 2018-08-20T08:54:45+00:00 17e96d8516e31c3cb52cb8e2ee79d1d2e6948c11 The conversion to sg_copy_{from,to}_buffer has been done in the wrong way. sg_copy_to_buffer is a copy from an SG list to a linear buffer so it can't replace memcpy(dest, host->virt_base, data->sg->length) where dest is the virtual address of the SG. Same for sg_copy_from_buffer but in the opposite way. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Suggested-by: Douglas Gilbert <dgilbert@interlog.com> Fixes: 53d7e098ba08 ("mmc: android-goldfish: use sg_copy_{from,to}_buffer") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
The conversion to sg_copy_{from,to}_buffer has been done in the wrong
way. sg_copy_to_buffer is a copy from an SG list to a linear buffer so
it can't replace memcpy(dest, host->virt_base, data->sg->length) where
dest is the virtual address of the SG. Same for sg_copy_from_buffer
but in the opposite way.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Fixes: 53d7e098ba08 ("mmc: android-goldfish: use sg_copy_{from,to}_buffer")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: atmel-mci: fix bad logic of sg_copy_{from,to}_buffer conversion 2018-08-21T14:06:17+00:00 Ludovic Desroches ludovic.desroches@microchip.com 2018-08-20T08:54:44+00:00 19f5e9e015675fcdbf2c20e804b2e84e80201454 The conversion to sg_copy_{from,to}_buffer has been done in the wrong way. sg_copy_to_buffer is a copy from an SG list to a linear buffer so it can't replace memcpy(buf + offset, &value, remaining) where buf is the virtual address of the SG. Same for sg_copy_to_buffer but in the opposite way. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Suggested-by: Douglas Gilbert <dgilbert@interlog.com> Fixes: 5b4277814e3f ("mmc: atmel-mci: use sg_copy_{from,to}_buffer") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
The conversion to sg_copy_{from,to}_buffer has been done in the wrong
way. sg_copy_to_buffer is a copy from an SG list to a linear buffer so
it can't replace memcpy(buf + offset, &value, remaining) where buf is
the virtual address of the SG. Same for sg_copy_to_buffer but in the
opposite way.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Fixes: 5b4277814e3f ("mmc: atmel-mci: use sg_copy_{from,to}_buffer")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: tmio: remove unneeded variable in tmio_mmc_start_command() 2018-08-01T10:02:03+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2018-07-25T08:46:14+00:00 e401bfdadd2dc0f59bf76220236285130f072190 Pass TMIO_MASK_CMD to tmio_mmc_enable_mmc_irqs() directly, and remove the variable, irq_mask. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Pass TMIO_MASK_CMD to tmio_mmc_enable_mmc_irqs() directly,
and remove the variable, irq_mask.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: renesas_sdhi: Fix sampling clock position selecting 2018-08-01T10:02:03+00:00 Niklas Söderlund niklas.soderlund+renesas@ragnatech.se 2018-07-24T14:51:38+00:00 5c99826b27d0afd4c05c2013385b17037f579cf9 When tuning each tap is issued CMD19 twice and the result of both runs recorded in host->taps. If the result is different between the two runs the wrong sampling clock position was selected. Fix this by merging the two runs and only keep the result for each tap if it was good in both sets. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
When tuning each tap is issued CMD19 twice and the result of both runs
recorded in host->taps. If the result is different between the two runs
the wrong sampling clock position was selected. Fix this by merging the
two runs and only keep the result for each tap if it was good in both
sets.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: tmio: Fix tuning flow 2018-08-01T10:02:03+00:00 Masaharu Hayakawa masaharu.hayakawa.ry@renesas.com 2018-07-24T14:51:37+00:00 a8f399f624e1ae902828ad788f3601ff7b3e0eed If the return value of mmc_send_tuning() is error other than -EILSEQ, the tuning fails and process goes out of for_loop. The correct processing is to judge their TAP as not good (NG) and continue. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> [Niklas: update commit message] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
If the return value of mmc_send_tuning() is error other than -EILSEQ,
the tuning fails and process goes out of for_loop. The correct
processing is to judge their TAP as not good (NG) and continue.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
[Niklas: update commit message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>