linux.git/drivers/mmc/core, branch v5.9-rc2

Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-08-06T18:55:43+00:00

Pull sched/fifo updates from Ingo Molnar:
 "This adds the sched_set_fifo*() encapsulation APIs to remove static
  priority level knowledge from non-scheduler code.

  The three APIs for non-scheduler code to set SCHED_FIFO are:

   - sched_set_fifo()
   - sched_set_fifo_low()
   - sched_set_normal()

  These are two FIFO priority levels: default (high), and a 'low'
  priority level, plus sched_set_normal() to set the policy back to
  non-SCHED_FIFO.

  Since the changes affect a lot of non-scheduler code, we kept this in
  a separate tree"

* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  sched,tracing: Convert to sched_set_fifo()
  sched: Remove sched_set_*() return value
  sched: Remove sched_setscheduler*() EXPORTs
  sched,psi: Convert to sched_set_fifo_low()
  sched,rcutorture: Convert to sched_set_fifo_low()
  sched,rcuperf: Convert to sched_set_fifo_low()
  sched,locktorture: Convert to sched_set_fifo()
  sched,irq: Convert to sched_set_fifo()
  sched,watchdog: Convert to sched_set_fifo()
  sched,serial: Convert to sched_set_fifo()
  sched,powerclamp: Convert to sched_set_fifo()
  sched,ion: Convert to sched_set_normal()
  sched,powercap: Convert to sched_set_fifo*()
  sched,spi: Convert to sched_set_fifo*()
  sched,mmc: Convert to sched_set_fifo*()
  sched,ivtv: Convert to sched_set_fifo*()
  sched,drm/scheduler: Convert to sched_set_fifo*()
  sched,msm: Convert to sched_set_fifo*()
  sched,psci: Convert to sched_set_fifo*()
  sched,drbd: Convert to sched_set_fifo*()
  ...

Merge tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2020-08-05T20:23:24+00:00

Pull MMC updates from Ulf Hansson:
 "MMC core:

   - Add a new host cap bit and a corresponding DT property, to support
     power cycling of the card by FW at system suspend/resume.

   - Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode

   - Fix switch to 1/4-bit mode at system suspend/resume for SD-combo
     cards

   - Convert the mmc-pwrseq DT bindings to the json-schema

   - Always allow the card detect uevent to be consumed by userspace

  MMC host controllers:

   - Convert a few DT bindings to the json-schema

   - mtk-sd:
      - Add support for command queue through cqhci
      - Add support for the MT6779 variant

   - renesas_sdhi_internal_dmac:
      - Fix dma unmapping in the error path

   - sdhci_am654:
      - Add support for the AM65x PG2.0 variant
      - Extend support for phys/clocks

   - sdhci-cadence:
      - Drop incorrect HW tuning for SD mode

   - sdhci-msm:
      - Add support for interconnect bandwidth scaling
      - Enable internal voltage control
      - Enable low power state for pinctrls

   - sdhci-of-at91:
      - Ludovic Desroches handovers maintenance to Eugen Hristev

   - sdhci-pci-gli:
      - Improve clock handling for GL975x

   - sdhci-pci-o2micro:
      - Add HW tuning for SDR104 mode
      - Fix support for O2 host controller Seabird1"

* tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits)
  mmc: mediatek: make function msdc_cqe_disable() static
  MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev
  dt-bindings: mmc: mediatek: Add document for mt6779
  mmc: mediatek: command queue support
  mmc: mediatek: refine msdc timeout api
  mmc: mediatek: add MT6779 MMC driver support
  mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode
  mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1
  mmc: via-sdmmc: use generic power management
  memstick: jmb38x_ms: use generic power management
  mmc: sdhci-cadence: do not use hardware tuning for SD mode
  mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x
  mmc: cqhci: Fix a print format for the task descriptor
  mmc: sdhci-of-arasan: fix timings allocation code
  mmc: sdhci: Fix a potential uninitialized variable
  dt-bindings: mmc: renesas,sdhi: convert to YAML
  dt-bindings: mmc: convert arasan sdhci bindings to yaml
  mmc: sdhci: Fix potential null pointer access while accessing vqmmc
  mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND
  dt-bindings: mmc: Add full-pwr-cycle-in-suspend property
  ...

mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND

2020-07-13T10:18:26+00:00

The commit 5a36d6bcdf23 ("mmc: core: Add DT-bindings for
MMC_CAP2_FULL_PWR_CYCLE") added the "full-pwr-cycle" property which
is possible to perform a full power cycle of the card at any time.

However, some environment (like r8a77951-salvator-xs) is possible
to perform a full power cycle of the card in suspend via firmware
(PSCI on arm-trusted-firmware). So, in worst case, since we are
not doing a graceful shutdown of the eMMC device (just cut VCCQ
while the eMMC is "sleeping") in suspend, it could lead to internal
data corruptions. So, add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND
to do a graceful shutdown which issues Power Off notification
before entering system suspend.

Signed-off-by: Yoshihiro Shimoda 
Link: https://lore.kernel.org/r/1594123122-13156-3-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson

mmc: core: Correct misspelling of 'mq' in mmc_init_request()'s docs

2020-07-13T10:18:25+00:00

Correcting this misspelling squashes the following W=1 build warning(s):

 mmc/core/queue.c:212: warning: Function parameter or member 'mq' not described in '__mmc_init_request'
 mmc/core/queue.c:212: warning: Excess function parameter 'q' description in '__mmc_init_request'

Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/20200701124702.908713-8-lee.jones@linaro.org
Signed-off-by: Ulf Hansson

mmc: core: Add missing documetation for 'mmc' and 'ios'

2020-07-13T10:18:25+00:00

Remainder of the kerneldoc descriptions look present and correct.

Fixes the following W=1 kernel build warnings:

 drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'mmc' not described in 'mmc_regulator_set_vqmmc'
 drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'ios' not described in 'mmc_regulator_set_vqmmc'

Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/20200701124702.908713-4-lee.jones@linaro.org
Signed-off-by: Ulf Hansson

mmc: core: Provide description for sdio_set_host_pm_flags()'s 'flag' arg

2020-07-13T10:18:25+00:00

Add missing kerneldoc entry for sdio_set_host_pm_flags()'s 'flag'
function argument.

Fixes the following W=1 kernel build warning:

 kernel/drivers/mmc/core/sdio_io.c:722: warning: Function parameter or member 'flags' not described in 'sdio_set_host_pm_flags'

Cc: Pierre Ossman 
Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/20200701124702.908713-3-lee.jones@linaro.org
Signed-off-by: Ulf Hansson

mmc: core: Mark fixups as __maybe_unused

2020-07-13T10:18:25+00:00

Not all source files which include quirks.h make use of the all of
the available fixup information.  When this happens the compiler
complains that some constant variables are defined by never used.
We can fix this by telling the compiler that this intentional by
simply marking them as __maybe_unused.

Fixes the following W=1 kernel build warnings:

 In file included from drivers/mmc/core/sdio.c:22:
 drivers/mmc/core/quirks.h:105:31: warning: ‘mmc_ext_csd_fixups’ defined but not used [-Wunused-const-variable=]
 105 | static const struct mmc_fixup mmc_ext_csd_fixups[] = {
 | ^~~~~~~~~~~~~~~~~~
 drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=]
 17 | static const struct mmc_fixup mmc_blk_fixups[] = {
 | ^~~~~~~~~~~~~~
 In file included from drivers/mmc/core/mmc.c:25:
 drivers/mmc/core/quirks.h:123:31: warning: ‘sdio_fixup_methods’ defined but not used [-Wunused-const-variable=]
 123 | static const struct mmc_fixup sdio_fixup_methods[] = {
 | ^~~~~~~~~~~~~~~~~~
 drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=]
 17 | static const struct mmc_fixup mmc_blk_fixups[] = {
 | ^~~~~~~~~~~~~~

Cc: Andrei Warkentin 
Cc: Martin Mares 
Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/20200701124702.908713-2-lee.jones@linaro.org
Signed-off-by: Ulf Hansson

mmc: core: Set default power mode in mmc_alloc_host()

2020-07-13T10:18:24+00:00

Set the default power mode, MMC_POWER_UNDEFINED, in mmc_alloc_host() rather
than in mmc_start_host(). This enables host drivers to make use of the
initial state during ->probe().

Signed-off-by: Veerabhadrarao Badiganti  Link:
https://lore.kernel.org/r/1592919288-1020-3-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson

mmc: sdio: fix clock rate setting for SDR12/SDR25 mode

2020-07-13T10:18:24+00:00

In current code logic, when work in SDR12/SDR25 mode, the final clock
rate is incorrect, just the legancy 400KHz, because the
card->sw_caps.sd3_bus_mode do not has the flag SD_MODE_UHS_SDR12 or
SD_MODE_UHS_SDR25. Besides, SDIO_SPEED_SDR12 is actually value 0, and
every mode need to config the timing and clock rate, so remove the
‘if’ operator.

Signed-off-by: Haibo Chen 
Tested-by: Pali Rohár 
Link: https://lore.kernel.org/r/1592813959-5914-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson

mmc: sdio: Fix 1-bit mode for SD-combo cards during suspend

2020-07-13T10:18:23+00:00

Commit 6b5eda369ac3 ("sdio: put active devices into 1-bit mode during
suspend") disabled 4-bit mode during system suspend. After this patch,
commit 7310ece86ad7 ("mmc: implement SD-combo (IO+mem) support") used
new sdio_enable_4bit_bus() instead of sdio_enable_wide() to support
SD-combo cards, also for card resume. However, no corresponding support
added during suspend. That is not correct. Let's fix it.

Signed-off-by: Yue Hu 
Link: https://lore.kernel.org/r/20200609081431.6376-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson