linux.git/drivers/mmc/core, branch v5.3-rc2

Merge tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2019-07-12T01:11:21+00:00

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Let the dma map ops deal with bouncing and drop dma_max_pfn() from
     the dma-mapping interface for ARM
   - Convert the generic MMC DT doc to YAML schemas
   - Drop questionable support for powered-on re-init of SDIO cards at
     runtime resume and for SDIO HW reset
   - Prevent questionable re-init of powered-on removable SDIO cards at
     system resume
   - Cleanup and clarify some SDIO core code

  MMC host:
   - tmio: Make runtime PM enablement more flexible for variants
   - tmio/renesas_sdhi: Rename DT doc tmio_mmc.txt to renesas,sdhi.txt
     to clarify
   - sdhci-pci: Add support for Intel EHL
   - sdhci-pci-o2micro: Enable support for 8-bit bus
   - sdhci-msm: Prevent acquiring a mutex while holding a spin_lock
   - sdhci-of-esdhc: Improve clock management and tuning
   - sdhci_am654: Enable support for 4 and 8-bit bus on J721E
   - sdhci-sprd: Use pinctrl for a proper signal voltage switch
   - sdhci-sprd: Add support for HS400 enhanced strobe mode
   - sdhci-sprd: Enable PHY DLL and allow delay config to stabilize the
     clock
   - sdhci-sprd: Add support for optional gate clock
   - sunxi-mmc: Convert DT doc to YAML schemas
   - meson-gx: Add support for broken DRAM access for DMA

  MEMSTICK core:
   - Fixup error path of memstick_init()"

* tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
  mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654
  mmc: alcor: remove a redundant greater or equal to zero comparison
  mmc: sdhci-msm: fix mutex while in spinlock
  mmc: sdhci_am654: Make some symbols static
  dma-mapping: remove dma_max_pfn
  mmc: core: let the dma map ops handle bouncing
  dt-binding: mmc: rename tmio_mmc.txt to renesas,sdhi.txt
  mmc: sdhci-sprd: Add pin control support for voltage switch
  dt-bindings: mmc: sprd: Add pinctrl support
  mmc: sdhci-sprd: Add start_signal_voltage_switch ops
  mmc: sdhci-pci: Add support for Intel EHL
  mmc: tmio: Use dma_max_mapping_size() instead of a workaround
  mmc: sdio: Drop unused in-parameter from mmc_sdio_init_card()
  mmc: sdio: Drop unused in-parameter to mmc_sdio_reinit_card()
  mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resume
  mmc: sdio: Drop powered-on re-init at runtime resume and HW reset
  mmc: sdio: Move comment about re-initialization to mmc_sdio_reinit_card()
  mmc: sdio: Drop mmc_claim|release_host() in mmc_sdio_power_restore()
  mmc: sdio: Turn sdio_run_irqs() into static
  mmc: sdhci: Fix indenting on SDHCI_CTRL_8BITBUS
  ...

mmc: core: let the dma map ops handle bouncing

2019-07-10T11:17:30+00:00

Just like we do for all other block drivers. Especially as the limit
imposed at the moment might be way to pessimistic for iommus.

This also means we are not going to set a bounce limit for the queue, in
case we have a dma mask. On most architectures it was never needed, the
major hold out was x86-32 with PAE, but that has been fixed by now.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Ulf Hansson

mmc: sdio: Drop unused in-parameter from mmc_sdio_init_card()

2019-07-10T11:20:17+00:00

The "powered_resume" in-parameter to mmc_sdio_init_card() has now become
redundant as all callers set it to 0. Therefore let's just drop it.

Signed-off-by: Ulf Hansson 
Reviewed-by: Douglas Anderson 
Tested-by: Douglas Anderson

mmc: sdio: Drop unused in-parameter to mmc_sdio_reinit_card()

2019-07-10T11:19:57+00:00

The "powered_resume" in-parameter to mmc_sdio_reinit_card() has now become
redundant as all callers set it to 0. Therefore let's just drop it.

Signed-off-by: Ulf Hansson 
Reviewed-by: Douglas Anderson 
Tested-by: Douglas Anderson

mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resume

2019-07-10T11:19:31+00:00

It looks like the original idea behind always doing a re-initialization of
a removable SDIO card during system resume in mmc_sdio_resume(), is to try
to play safe to detect whether the card has been removed.

However, this seems like a really a bad idea as it will most likely screw
things up, especially when the card is expected to remain powered on during
system suspend by the SDIO func driver.

Let's fix this, simply by trusting that the detect work checks if the card
is alive and inserted, which is being scheduled at the PM_POST_SUSPEND
notification anyway.

Signed-off-by: Ulf Hansson 
Tested-by: Douglas Anderson 
Reviewed-by: Douglas Anderson

mmc: sdio: Drop powered-on re-init at runtime resume and HW reset

2019-07-10T11:18:56+00:00

To use the so called powered-on re-initialization of an SDIO card, the
power to the card must obviously have stayed on. If not, the initialization
will simply fail.

In the runtime suspend case, the card is always powered off. Hence, let's
drop the support for powered-on re-initialization during runtime resume, as
it doesn't make sense.

Moreover, during a HW reset, the point is to cut the power to the card and
then do fresh re-initialization. Therefore drop the support for powered-on
re-initialization during HW reset.

Signed-off-by: Ulf Hansson 
Fixes: ca8971ca5753 ("mmc: dw_mmc: Prevent runtime PM suspend when SDIO IRQs are enabled")
Tested-by: Douglas Anderson

mmc: sdio: Move comment about re-initialization to mmc_sdio_reinit_card()

2019-07-10T11:18:29+00:00

The comment in mmc_sdio_power_restore() belongs in mmc_sdio_reinit_card(),
which was created during a previous commit that re-factored some code. Fix
this by moving the comment into mmc_sdio_reinit_card().

Signed-off-by: Ulf Hansson 
Reviewed-by: Douglas Anderson

mmc: sdio: Drop mmc_claim|release_host() in mmc_sdio_power_restore()

2019-07-10T11:17:30+00:00

The function mmc_sdio_power_restore() is called either from
mmc_sdio_runtime_resume() or from mmc_sdio_hw_reset(). Both callers either
claims/releases the host or require its callers to do so. Therefore let's
drop the redundant calls to mmc_claim|release_host() in
mmc_sdio_power_restore().

Signed-off-by: Ulf Hansson 
Reviewed-by: Douglas Anderson 
Tested-by: Douglas Anderson

Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2019-06-21T16:58:42+00:00

Pull still more SPDX updates from Greg KH:
 "Another round of SPDX updates for 5.2-rc6

  Here is what I am guessing is going to be the last "big" SPDX update
  for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
  that were "easy" to determine by pattern matching. The ones after this
  are going to be a bit more difficult and the people on the spdx list
  will be discussing them on a case-by-case basis now.

  Another 5000+ files are fixed up, so our overall totals are:
	Files checked:            64545
	Files with SPDX:          45529

  Compared to the 5.1 kernel which was:
	Files checked:            63848
	Files with SPDX:          22576

  This is a huge improvement.

  Also, we deleted another 20000 lines of boilerplate license crud,
  always nice to see in a diffstat"

* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
  ...

mmc: sdio: Turn sdio_run_irqs() into static

2019-06-20T13:36:36+00:00

All external users of sdio_run_irqs() have converted into using the
preferred sdio_signal_irq() interface, thus not calling the function
directly any more. Avoid further new users of it, by turning it into
static.

Suggested-by: Douglas Anderson 
Signed-off-by: Ulf Hansson 
Reviewed-by: Douglas Anderson 
Signed-off-by: Ulf Hansson