Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

For each card successfully added to the bus, create a subdirectory under
the host's debugfs root with information about the card.

At the moment, only a single file is added to the card directory for
all cards: "state". It reflects the "state" field in struct mmc_card,
indicating whether the card is present, readonly, etc.

For MMC and SD cards (not SDIO), another file is added: "status".
Reading this file will ask the card about its current status and
return it. This can be useful if the card just refuses to respond to
any commands, which might indicate that the card state is not what the
MMC core thinks it is (due to a missing stop command, for example.)

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

When CONFIG_DEBUG_FS is set, create a few files under /sys/kernel/debug
containing information about an mmc host's internal state. Currently,
just a single file is created, "ios", which contains information about
the current operating parameters for the bus (clock speed, bus width,
etc.)

Host drivers can add additional files and directories under the host's
root directory by passing the debugfs_root field in struct mmc_host as
the 'parent' parameter to debugfs_create_*.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (68 commits)
  sdio_uart: Fix SDIO break control to now return success or an error
  mmc: host driver for Ricoh Bay1Controllers
  sdio: sdio_io.c Fix sparse warnings
  sdio: fix the use of hard coded timeout value.
  mmc: OLPC: update vdd/powerup quirk comment
  mmc: fix spares errors of sdhci.c
  mmc: remove multiwrite capability
  wbsd: fix bad dma_addr_t conversion
  atmel-mci: Driver for Atmel on-chip MMC controllers
  mmc: fix sdio_io sparse errors
  mmc: wbsd.c fix shadowing of 'dma' variable
  MMC: S3C24XX: Refuse incorrectly aligned transfers
  MMC: S3C24XX: Add maintainer entry
  MMC: S3C24XX: Update error debugging.
  MMC: S3C24XX: Add media presence test to request handling.
  MMC: S3C24XX: Fix use of msecs where jiffies are needed
  MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices
  MMC: S3C24XX: Fix s3c2410_dma_request() return code check.
  MMC: S3C24XX: Allow card-detect on non-IRQ capable pin
  MMC: S3C24XX: Ensure host->mrq->data is valid
  ...

Manually fixed up bogus executable bits on drivers/mmc/core/sdio_io.c
and include/linux/mmc/sdio_func.h when merging.

Unfold nested macros it creates not readable code and
sparse warnings
sdio_io.c:190:9: warning: symbol '_min1' shadows an earlier one

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

This adds reading and using of enable_timeout from the CIS

Signed-off-by: Benzi Zbit <benzi.zbit@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

This patch fixes sdio_io sparse errors.
This fix changes signature of API functions,
changing
unsigned char -> u8
unsigned short -> u16
unsigned long -> u32 - this was probably a bug in 64 bit platforms

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

Make sure that the maximum size for a byte mode transfer is identical
in all places. Also tweak the transfer helper so that a single byte
mode transfer is preferred over (possibly multiple) block mode
request(s).

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

There are a lot of crappy controllers out there that cannot handle
all the request sizes that the MMC/SD/SDIO specifications require.
In case the card driver can pad the data to overcome the problems,
this commit adds a helper that calculates how much that padding
should be.

A corresponding helper is also added for SDIO, but it can also deal
with all the complexities of splitting up a large transfer efficiently.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

Make the variable name in the comments match the actual name
of the variable.

Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>