linux.git/drivers/mmc/core/sd.c, branch v3.17

mmc: drop the speed mode of card's state

2014-05-12T22:05:53+00:00

Timing mode identifier has same role and can take the place
of speed mode. This change removes all related speed mode.

Signed-off-by: Seungwon Jeon 
Tested-by: Jaehoon Chung 
Acked-by: Jaehoon Chung 
Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: Convert to use ATTRIBUTE_GROUPS

2014-04-22T11:06:38+00:00

Use new ATTRIBUTE_GROUPS macro to declare attribute groups.

Signed-off-by: Axel Lin 
Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: core: Use MMC_UNSAFE_RESUME as default behavior

2014-02-14T03:58:15+00:00

Invoking system suspend or shutdown without using the Kconfig option
MMC_UNSAFE_RESUME, did trigger an ungraceful power cut of the card.

To improve the situation, change the behavior to always make use of the
available bus_ops callbacks that handles system suspend and shutdown
properly.

By changing the behavior MMC_UNSAFE_RESUME becomes redundant, so lets's
remove it.

Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: core: sd: implement proper support for sd3.0 au sizes

2014-01-13T19:02:35+00:00

This reverts and updates commit 77776fd0a4cc541b9 ("mmc: sd: fix the
maximum au_size for SD3.0"). The au_size for SD3.0 cannot be achieved
by a simple bit shift, so this needs to be implemented differently.
Also, don't print the warning in case of 0 since 'not defined' is
different from 'invalid'.

Signed-off-by: Wolfram Sang 
Acked-by: Jaehoon Chung 
Reviewed-by: H Hartley Sweeten 
Cc: stable  # [3.12, 3.13]
Signed-off-by: Chris Ball

mmc: core: Add MMC_CAP_RUNTIME_RESUME to resume at runtime_resume

2013-10-31T00:28:43+00:00

In some environments it is to prefer to postpone the resume of the card
device until runtime_resume is being carried out, since it will mean a
signficant decrease of the total system resume time.

The reason of the decreased resume time is simply because of the actual
re-initalization of the card, which typically takes hundreds of
milliseconds, is performed outside the resume sequence and wont thus
affect it.

For removable card, the detect work tries to re-detect the card to make
sure it is still present, as a part of that sequence the card will also
be runtime_resumed and thus also fully resumed.

For a non-removable card, typically a mmc blk request will trigger a
runtime_resume and thus fully resume the card. This also means the
first request will likely suffer from an inital latency since the
re-initialization of the card needs to be performed.

Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: core: Improve runtime PM support during suspend/resume for sd/mmc

2013-10-31T00:28:42+00:00

The card device is considered as in-active after it has been suspended.
To prevent any further runtime PM requests in suspend state, we then
disable runtime PM.

After the card device has been resumed, we shall consider it as active,
like we also do after a probe sequence. When resumed, we can safely
enable runtime PM again.

This will make sure the PM core can request the card device to go to
in-active state after a resume has been completed. Previously we had to
wait for new pm_runtime_get->pm_runtime_put cycle to be executed.

Additionally, once a resume has been carried out, update the last busy
mark. At the moment this will have no effect but if the PM core will
respect autosuspend enabled devices, when it directly triggers a
runtime_suspend from a runtime_idle, it will mean the card device will
be scheduled for a delayed runtime_suspend instead of done immediately.

Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: core: Remove redundant mmc_power_up|off at runtime callbacks

2013-10-31T00:28:41+00:00

Commit "mmc: core: Push common suspend|resume code into each bus_ops"
moved the responsibility for doing mmc_power_up|off into each
suspend/resume bus_ops. When using MMC_CAP_AGGRESSIVE_PM, through the
runtime callbacks, calls to mmc_power_up|off became redundant.

When removing them, we are also able to remove the calls to
mmc_claim|release_host, thus simplifing code a bit more.

Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: Don't force card to active state when entering suspend/shutdown

2013-10-31T00:28:40+00:00

By adding a card state that records if it is suspended or resumed, we
can accept asyncronus suspend/resume requests for the mmc and sd
bus_ops.

MMC_CAP_AGGRESSIVE_PM, will at request inactivity through the runtime
bus_ops callbacks, execute a suspend of the the card. In the state were
this has been done, we can receive a suspend request for the mmc bus,
which for sd and mmc forced the card to active state by a
pm_runtime_get_sync. In other words, the card was resumed and then
immediately suspended again, completely unnecessary.

Since the suspend/resume bus_ops callbacks for sd and mmc are now
capable of handling asynchronous requests, we no longer need to force
the card to active state before executing suspend. Evidently preventing
the above sequence for MMC_CAP_AGGRESSIVE_PM.

Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: core: Collect common code for card ocr validation

2013-10-31T00:26:31+00:00

Since mmc_select_voltage now only gets called from the attach sequence,
it makes sense to move the out of spec validations of the card ocr into
this function.

Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: core: Prevent violation of specs while initializing cards

2013-10-31T00:26:30+00:00

According to eMMC/SD/SDIO specs, the VDD (VCC) voltage level must be
maintained during the initialization sequence. If we want/need to tune
the voltage level, a complete power cycle of the card must be executed.

Most host drivers conforms to the specifications by only allowing to
change VDD voltage level at the MMC_POWER_UP state, but some also cares
about MMC_POWER_ON state, which they should'nt. This patch will not
break those drivers, but they could clean up code to better reflect
what is expected from the protocol layer.

A big re-work of the mmc_select_voltage function is done to only change
VDD voltage level if the host supports MMC_CAP2_FULL_PWR_CYCLE.
Otherwise only validation of the host and card ocr mask will be done.

A very nice side-effect of this patch is that we now don't need to
reset the negotiated ocr mask at the mmc_power_off function, since now
it will actually reflect the present voltage level, which safely can be
used at the next power up and re-initialization. Moreover, we then only
need to execute mmc_select_voltage from the attach sequence.

Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball