Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Continue to re-factor code to prepare for eMMC CMDQ and blkmq support
   - Introduce queue semantics to prepare for eMMC CMDQ and blkmq support
   - Add helper functions to manage temporary enable/disable of eMMC CMDQ
   - Improve wait-busy detection for SDIO

  MMC host:
   - cavium: Add driver to support Cavium controllers
   - cavium: Extend Cavium driver to support Octeon and ThunderX SOCs
   - bcm2835: Add new driver for Broadcom BCM2835 controller
   - sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller
   - sdhci-tegra: Add support for the Tegra186 variant
   - sdhci-of-esdhc: Support for UHS-I SD cards
   - sdhci-of-esdhc: Support for eMMC HS200 cards
   - sdhci-cadence: Add eMMC HS400 enhanced strobe support
   - sdhci-esdhc-imx: Reset tuning circuit when needed
   - sdhci-pci: Modernize and clean-up some PM related code
   - sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices
   - sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers
   - sdhci: Re-factoring and modernizations
   - sdhci: Optimize delay loops
   - sdhci: Improve register dump print format
   - sdhci: Add support for the Command Queue Engine
   - meson-gx: Various improvements and clean-ups
   - meson-gx: Add support for CMD23
   - meson-gx: Basic tuning support to avoid CRC errors
   - s3cmci: Enable probing via DT
   - mediatek: Improve tuning support for eMMC HS200 and HS400 mode
   - tmio: Improve DMA support
   - tmio: Use correct response for CMD12
   - dw_mmc: Minor improvements and clean-ups"

* tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (148 commits)
  mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a
  mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelay
  mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHY
  mmc: sdhci-xenon: Fix the work flow in xenon_remove().
  MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC
  mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data()
  mmc: cavium: Use module_pci_driver to simplify the code
  mmc: cavium: Add MMC support for Octeon SOCs.
  mmc: cavium: Fix detection of block or byte addressing.
  mmc: core: Export API to allow hosts to get the card address
  mmc: sdio: Fix sdio wait busy implement limitation
  mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card
  clk: apn806: fix spelling mistake: "mising" -> "missing"
  mmc: sdhci-of-esdhc: add delay between tuning cycles
  mmc: sdhci: Control the delay between tuning commands
  mmc: sdhci-of-esdhc: add tuning support
  mmc: sdhci-of-esdhc: add support for signal voltage switch
  mmc: sdhci-of-esdhc: add peripheral clock support
  mmc: sdhci-pci: Allow for 3 bytes from Intel DSM
  mmc: cavium: Fix a shift wrapping bug
  ...

eMMC can have multiple internal partitions that are represented as separate
disks / queues. However switching between partitions is only done when the
queue is empty. Consequently the array of mmc requests that are queued can
be shared between partitions saving memory.

Keep a pointer to the mmc request queue on the card, and use that instead
of allocating a new one for each partition.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Change from viewing the requests in progress as 'current' and 'previous',
to viewing them as a queue. The current request is allocated to the first
free slot. The presence of incomplete requests is determined from the
count (mq->qcnt) of entries in the queue. Non-read-write requests (i.e.
discards and flushes) are not added to the queue at all and require no
special handling. Also no special handling is needed for the
MMC_BLK_NEW_REQUEST case.

As well as allowing an arbitrarily sized queue, the queue thread function
is significantly simpler.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc only supports discarding on large alignments, so the zeroing code
would always fall back to explicit writings of zeroes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for Marvell SD8787 Wifi/BT chip
   - Improve UHS support for SDIO
   - Invent MMC_CAP_3_3V_DDR and a DT binding for eMMC DDR 3.3V mode
   - Detect Auto BKOPS enable bit
   - Export eMMC device lifetime information through sysfs
   - First take to slim down the public mmc headers to avoid abuse
   - Re-factoring of the mmc block device driver to prepare for blkmq
   - Cleanup code for the mmc block device driver
   - Clarify and cleanup code dealing with data requests
   - Cleanup some code by converting to ida_simple_ functions
   - Cleanup code dealing with card quirks
   - Cleanup private and public mmc header files

  MMC host:
   - Don't rely on public mmc headers to include non-mmc related headers
   - meson: Add support for eMMC HS400 mode
   - meson: Various cleanups and improvements
   - omap_hsmmc: Use the proper provided busy timeout from the core
   - sunxi: Enable new timings for the A64 MMC controllers
   - sunxi: Improvements for clock management
   - tmio: Improvements for SDIO interrupts
   - mxs-mmc: Add CMD23 support
   - sdhci-msm: Enable HS400 enhanced strobe mode support
   - sdhci-msm: Correct HS400 tuning sequence
   - sdhci-acpi: Support deferred probe
   - sdhci-pci: Add support for eMMC HS200 tuning mode on AMD
   - mediatek: Correct the implementation of card busy detection
   - dw_mmc: Initial support for ZX mmc controller
   - sh_mobile_sdhi: Enable support for eMMC HS200 mode
   - sh_mmcif: Various cleanups and improvements"

* tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (145 commits)
  mmc: core: add mmc prefix for blk_fixups
  mmc: core: move all quirks together into quirks.h
  mmc: core: improve the quirks for sdio devices
  mmc: core: move some sdio IDs out of quirks file
  mmc: core: change quirks.c to be a header file
  mmc: sdhci-cadence: fix bit shift of read data from PHY port
  mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS support
  mmc: MAN_BKOPS_EN inverse debug message logic
  mmc: meson-gx: add support for HS400 mode
  mmc: meson-gx: remove unneeded checks in remove
  mmc: meson-gx: reduce bounce buffer size
  mmc: meson-gx: set max block count and request size
  mmc: meson-gx: improve interrupt handling
  mmc: meson-gx: improve meson_mmc_irq_thread
  mmc: meson-gx: improve meson_mmc_clk_set
  mmc: meson-gx: minor improvements in meson_mmc_set_ios
  mmc: meson: Assign the minimum clk rate as close to 400KHz as possible
  mmc: core: start to break apart mmc_start_areq()
  mmc: block: respect bool returned from blk_end_request()
  mmc: block: return errorcode from mmc_sd_num_wr_blocks()
  ...

Instead of masking and setting two bits in the "flags" field
for the mmc_queue, just use two bools named "suspended" and
"new_request".

The masking and setting would likely have race conditions
anyways, it is better to use a simple member like this.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

A significant amount of functions and other definitions are available
through the public mmc card.h header file. Let's slim down this public mmc
interface, as to prevent users from abusing it, by moving some of the
functions/definitions to private mmc header files.

This change concentrates on moving the functions into private mmc headers,
following changes may continue with additional clean-ups.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

A significant amount of functions are available through the public mmc
core.h header file. Let's slim down this public mmc interface, as to
prevent users from abusing it, by moving some of the functions to private
mmc header files.

This change concentrates on moving the functions into private mmc headers,
following changes may continue with additional clean-ups, as an example
some functions can be turned into static.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

* A multiplication for the size determination of a memory allocation
  indicated that an array data structure should be processed.
  Thus use the corresponding function "kmalloc_array".

  This issue was detected by using the Coccinelle software.

* Replace the specification of a data structure by a pointer dereference
  to make the corresponding size determination a bit safer according to
  the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The block layer won't send requests the driver isn't asking for,
so remove this check.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>