linux.git/drivers/mmc/core/core.c, branch v3.14 Linux kernel source tree mmc: Do not call get_cd for non removable cards 2014-01-13T17:48:17+00:00 Sascha Hauer s.hauer@pengutronix.de 2013-12-05T13:34:46+00:00 c1b55bfcb3e5599eb5e67efed70698ade02add4e Non removable cards are always present, so do not call get_cd for them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 
Non removable cards are always present, so do not call get_cd for them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: core: Remove deprecated mmc_suspend|resume_host APIs 2013-10-31T00:28:38+00:00 Ulf Hansson ulf.hansson@linaro.org 2013-09-26T09:01:18+00:00 3c0d22e8180b98eea412b84aa0f0c42c16159679 The are no more users of the deprecated mmc_suspend|resume_host API, so let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 
The are no more users of the deprecated mmc_suspend|resume_host API,
so let's remove it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: core: Signal wakeup event at card insert/removal 2013-10-31T00:26:32+00:00 Ulf Hansson ulf.hansson@linaro.org 2013-09-20T09:02:35+00:00 bbd43682eb12dab2ff4addfca04c32043dfde026 We want to give user space provision to fully consume a card insert/remove event, when the event was caused by a wakeup irq. By signaling the wakeup event for a time of 5 s for devices configured as wakeup capable, we likely will be prevent a sleep long enough to let user space consume the event. To enable this feature, host drivers must thus configure their devices as wakeup capable. This is a reworked implementation of the old wakelocks for the mmc subsystem, originally authored by Colin Cross and San Mehat for the Android kernel. Zoran Markovic shall also be given cred for recently re-trying to upstream this feature. Cc: San Mehat <san@google.com> Cc: Colin Cross <ccross@android.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Zoran Markovic <zoran.markovic@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Zoran Markovic <zoran.markovic@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 
We want to give user space provision to fully consume a card
insert/remove event, when the event was caused by a wakeup irq.

By signaling the wakeup event for a time of 5 s for devices configured
as wakeup capable, we likely will be prevent a sleep long enough to let
user space consume the event.

To enable this feature, host drivers must thus configure their devices
as wakeup capable.

This is a reworked implementation of the old wakelocks for the mmc
subsystem, originally authored by Colin Cross and San Mehat for the
Android kernel. Zoran Markovic shall also be given cred for recently
re-trying to upstream this feature.

Cc: San Mehat <san@google.com>
Cc: Colin Cross <ccross@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Zoran Markovic <zoran.markovic@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Zoran Markovic <zoran.markovic@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: core: Collect common code for card ocr validation 2013-10-31T00:26:31+00:00 Ulf Hansson ulf.hansson@linaro.org 2013-09-16T10:06:15+00:00 726d6f2374410d980341bfeb49399614e689e702 Since mmc_select_voltage now only gets called from the attach sequence, it makes sense to move the out of spec validations of the card ocr into this function. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 
Since mmc_select_voltage now only gets called from the attach sequence,
it makes sense to move the out of spec validations of the card ocr into
this function.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: core: Prevent violation of specs while initializing cards 2013-10-31T00:26:30+00:00 Ulf Hansson ulf.hansson@linaro.org 2013-09-16T09:28:42+00:00 ce69d37b7d8fa692c45d71d94aa0c921859b82ce According to eMMC/SD/SDIO specs, the VDD (VCC) voltage level must be maintained during the initialization sequence. If we want/need to tune the voltage level, a complete power cycle of the card must be executed. Most host drivers conforms to the specifications by only allowing to change VDD voltage level at the MMC_POWER_UP state, but some also cares about MMC_POWER_ON state, which they should'nt. This patch will not break those drivers, but they could clean up code to better reflect what is expected from the protocol layer. A big re-work of the mmc_select_voltage function is done to only change VDD voltage level if the host supports MMC_CAP2_FULL_PWR_CYCLE. Otherwise only validation of the host and card ocr mask will be done. A very nice side-effect of this patch is that we now don't need to reset the negotiated ocr mask at the mmc_power_off function, since now it will actually reflect the present voltage level, which safely can be used at the next power up and re-initialization. Moreover, we then only need to execute mmc_select_voltage from the attach sequence. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 
According to eMMC/SD/SDIO specs, the VDD (VCC) voltage level must be
maintained during the initialization sequence. If we want/need to tune
the voltage level, a complete power cycle of the card must be executed.

Most host drivers conforms to the specifications by only allowing to
change VDD voltage level at the MMC_POWER_UP state, but some also cares
about MMC_POWER_ON state, which they should'nt. This patch will not
break those drivers, but they could clean up code to better reflect
what is expected from the protocol layer.

A big re-work of the mmc_select_voltage function is done to only change
VDD voltage level if the host supports MMC_CAP2_FULL_PWR_CYCLE.
Otherwise only validation of the host and card ocr mask will be done.

A very nice side-effect of this patch is that we now don't need to
reset the negotiated ocr mask at the mmc_power_off function, since now
it will actually reflect the present voltage level, which safely can be
used at the next power up and re-initialization. Moreover, we then only
need to execute mmc_select_voltage from the attach sequence.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: core: Move cached value of the negotiated ocr mask to card struct 2013-10-31T00:26:29+00:00 Ulf Hansson ulf.hansson@linaro.org 2013-09-13T09:31:33+00:00 6904115095ad60ced638eb1e36e0e4e5e7de00b0 The negotiated ocr mask is directly related to the card. Once a card gets removed, the mask shall be dropped. By moving the cache of the ocr mask from the host struct to the card struct we have accomplished this. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 
The negotiated ocr mask is directly related to the card. Once a card
gets removed, the mask shall be dropped. By moving the cache of the ocr
mask from the host struct to the card struct we have accomplished this.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: core: Let mmc_set_signal_voltage take ocr as parameter 2013-10-31T00:26:26+00:00 Ulf Hansson ulf.hansson@linaro.org 2013-09-12T13:36:34+00:00 0f791fdad82a02af013e4fc8c385dc690080c366 This is yet another step of restructure code to be able to fixup the setup of the negotiated ocr mask. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 
This is yet another step of restructure code to be able to fixup the
setup of the negotiated ocr mask.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: core: Let mmc_power_up|cycle take ocr as parameter 2013-10-31T00:26:25+00:00 Ulf Hansson ulf.hansson@linaro.org 2013-09-12T12:36:53+00:00 4a065193c46a16f1ddf20622c7011c8f327e0478 As a step to fixup the setup of the negotiated ocr mask, we need the mmc_power_up|cycle functions to take the ocr as a parameter. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 
As a step to fixup the setup of the negotiated ocr mask, we need the
mmc_power_up|cycle functions to take the ocr as a parameter.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: core: Do not poll for busy with status cmd for all switch cmds 2013-10-31T00:26:24+00:00 Ulf Hansson ulf.hansson@linaro.org 2013-09-09T09:57:57+00:00 878e200bbb1fbde9f21582decab95b178e5a3b83 Some switch operations like poweroff notify, shall according to the spec not be followed by any other new commands. For these cases and when the host does'nt support MMC_CAP_WAIT_WHILE_BUSY, we must not send status commands to poll for busy detection. Instead wait for the stated timeout from the EXT_CSD before completing the request. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 
Some switch operations like poweroff notify, shall according to the
spec not be followed by any other new commands. For these cases and
when the host does'nt support MMC_CAP_WAIT_WHILE_BUSY, we must not
send status commands to poll for busy detection. Instead wait for
the stated timeout from the EXT_CSD before completing the request.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: core: remove dead function mmc_try_claim_host 2013-09-26T01:26:29+00:00 Grant Grundler grundler@chromium.org 2013-09-20T01:21:36+00:00 b83e867026caedd6d67fccfbe6e9a621edd79b21 cscope says there are no callers for mmc_try_claim_host in the kernel. No reason to keep it. Signed-off-by: Grant Grundler <grundler@chromium.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 
cscope says there are no callers for mmc_try_claim_host in the kernel.
No reason to keep it.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>