Pull i2c updates from Wolfram Sang:
 "This removes the currently unused CLASS_DDC support (controllers set
  the flag, but there is no client to use it).

  Also, CLASS_SPD support gets simplified to prepare removal in the
  future. Class based instantiation is not recommended these days
  anyhow.

  Furthermore, I2C core now creates a debugfs directory per I2C adapter.
  Current bus driver users were converted to use it.

  Finally, quite some driver updates. Standing out are patches for the
  wmt-driver which is refactored to support more variants.

  This is the rebased pull request where a large series for the
  designware driver was dropped"

* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  MAINTAINERS: use proper email for my I2C work
  i2c: stm32f7: add support for stm32mp25 soc
  i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
  dt-bindings: i2c: document st,stm32mp25-i2c compatible
  i2c: stm32f7: simplify status messages in case of errors
  i2c: stm32f7: perform most of irq job in threaded handler
  i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
  i2c: i801: Add lis3lv02d for Dell XPS 15 7590
  i2c: i801: Add lis3lv02d for Dell Precision 3540
  i2c: wmt: Reduce redundant: REG_CR setting
  i2c: wmt: Reduce redundant: function parameter
  i2c: wmt: Reduce redundant: clock mode setting
  i2c: wmt: Reduce redundant: wait event complete
  i2c: wmt: Reduce redundant: bus busy check
  i2c: mux: reg: Remove class-based device auto-detection support
  i2c: make i2c_bus_type const
  dt-bindings: at24: add ROHM BR24G04
  eeprom: at24: use of_match_ptr()
  i2c: cpm: Remove linux,i2c-index conversion from be32
  i2c: imx: Make SDA actually optional for bus recovering
  ...

This driver does not depend on CONFIG_OF so using of_match_ptr() makes
sense to reduce the size a bit.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.8-rc1.

  As usual, Jiri has a bunch of refactoring and cleanups for the tty
  core and drivers in here, along with the usual set of rs485 updates
  (someday this might work properly...)

  Along with those, in here are changes for:

   - sc16is7xx serial driver updates

   - platform driver removal api updates

   - amba-pl011 driver updates

   - tty driver binding updates

   - other small tty/serial driver updates and changes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
  serial: sc16is7xx: refactor EFR lock
  serial: sc16is7xx: reorder code to remove prototype declarations
  serial: sc16is7xx: refactor FIFO access functions to increase commonality
  serial: sc16is7xx: drop unneeded MODULE_ALIAS
  serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
  serial: sc16is7xx: add explicit return for some switch default cases
  serial: sc16is7xx: add macro for max number of UART ports
  serial: sc16is7xx: add driver name to struct uart_driver
  serial: sc16is7xx: use i2c_get_match_data()
  serial: sc16is7xx: use spi_get_device_match_data()
  serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
  serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
  serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
  serial: sc16is7xx: set safe default SPI clock frequency
  serial: sc16is7xx: add check for unsupported SPI modes during probe
  serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
  serial: 8250_exar: Set missing rs485_supported flag
  serial: omap: do not override settings for RS485 support
  serial: core, imx: do not set RS485 enabled if it is not supported
  serial: core: make sure RS485 cannot be enabled when it is not supported
  ...

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem changes
  for 6.8-rc1.

  Other than lots of binder driver changes (as you can see by the merge
  conflicts) included in here are:

   - lots of iio driver updates and additions

   - spmi driver updates

   - eeprom driver updates

   - firmware driver updates

   - ocxl driver updates

   - mhi driver updates

   - w1 driver updates

   - nvmem driver updates

   - coresight driver updates

   - platform driver remove callback api changes

   - tags.sh script updates

   - bus_type constant marking cleanups

   - lots of other small driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
  android: removed duplicate linux/errno
  uio: Fix use-after-free in uio_open
  drivers: soc: xilinx: add check for platform
  firmware: xilinx: Export function to use in other module
  scripts/tags.sh: remove find_sources
  scripts/tags.sh: use -n to test archinclude
  scripts/tags.sh: add local annotation
  scripts/tags.sh: use more portable -path instead of -wholename
  scripts/tags.sh: Update comment (addition of gtags)
  firmware: zynqmp: Convert to platform remove callback returning void
  firmware: turris-mox-rwtm: Convert to platform remove callback returning void
  firmware: stratix10-svc: Convert to platform remove callback returning void
  firmware: stratix10-rsu: Convert to platform remove callback returning void
  firmware: raspberrypi: Convert to platform remove callback returning void
  firmware: qemu_fw_cfg: Convert to platform remove callback returning void
  firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
  firmware: imx-dsp: Convert to platform remove callback returning void
  firmware: coreboot_table: Convert to platform remove callback returning void
  firmware: arm_scpi: Convert to platform remove callback returning void
  firmware: arm_scmi: Convert to platform remove callback returning void
  ...

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Reserve ECAM so we don't assign it to PCI BARs; this works around
     bugs where BIOS included ECAM in a PNP0A03 host bridge window,
     didn't reserve it via a PNP0C02 motherboard device, and didn't
     allocate space for SR-IOV VF BARs (Bjorn Helgaas)

   - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)

   - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)

   - Log device type (Root Port, Switch Port, etc) during enumeration
     (Bjorn Helgaas)

   - Log bridges before downstream devices so the dmesg order is more
     logical (Bjorn Helgaas)

   - Log resource names (BAR 0, VF BAR 0, bridge window, etc)
     consistently instead of a mix of names and "reg 0x10" (Puranjay
     Mohan, Bjorn Helgaas)

   - Fix 64GT/s effective data rate calculation to use 1b/1b encoding
     rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
     Järvinen)

   - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
     lpfc (Ilpo Järvinen)

   - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)

  Resource management:

   - Restructure pci_dev_for_each_resource() to avoid computing the
     address of an out-of-bounds array element (the bounds check was
     performed later so the element was never actually *read*, but it's
     nicer to avoid even computing an out-of-bounds address) (Andy
     Shevchenko)

  Driver binding:

   - Convert pci-host-common.c platform .remove() callback to
     .remove_new() returning 'void' since it's not useful to return
     error codes here (Uwe Kleine-König)

   - Convert exynos, keystone, kirin from .remove() to .remove_new(),
     which returns void instead of int (Uwe Kleine-König)

   - Drop unused struct pci_driver.node member (Mathias Krause)

  Virtualization:

   - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)

  Error handling:

   - Log AER errors as "Correctable" (not "Corrected") or
     "Uncorrectable" to match spec terminology (Bjorn Helgaas)

   - Decode Requester ID when no error info found instead of printing
     the raw hex value (Bjorn Helgaas)

  Endpoint framework:

   - Use a unique test pattern for each BAR in the pci_endpoint_test to
     make it easier to debug address translation issues (Niklas Cassel)

  Broadcom STB PCIe controller driver:

   - Add DT property "brcm,clkreq-mode" and driver support for different
     CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)

  Freescale Layerscape PCIe controller driver:

   - Add suspend/resume support for Layerscape LS1043a and LS1021a,
     including software-managed PME_Turn_Off and transitions between L0,
     L2/L3_Ready Link states (Frank Li)

  MediaTek PCIe controller driver:

   - Clear MSI interrupt status before handler to avoid missing MSIs
     that occur after the handler (qizhong cheng)

  MediaTek PCIe Gen3 controller driver:

   - Update mediatek-gen3 translation window setup to handle MMIO space
     that is not a power of two in size (Jianjun Wang)

  Qualcomm PCIe controller driver:

   - Increase qcom iommu-map maxItems to accommodate SDX55 (five
     entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)

   - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
     Kozlowski)

   - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
     Kozlowski)

   - Correct the qcom "reset-name" property, previously incorrectly
     called "reset-names" (Krzysztof Kozlowski)

   - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
     Armstrong)

  Renesas R-Car PCIe controller driver:

   - Replace of_device.h with explicit of.h include to untangle header
     usage (Rob Herring)

   - Add DT and driver support for optional miniPCIe 1.5v and 3.3v
     regulators on KingFisher (Wolfram Sang)

  SiFive FU740 PCIe controller driver:

   - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
     ARCH_SIFIVE (Conor Dooley)

  Synopsys DesignWare PCIe controller driver:

   - Align iATU mapping for endpoint MSI-X (Niklas Cassel)

   - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
     Shimoda)

   - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
     Shimoda)

   - Rename struct dw_pcie_ep_ops.func_conf_select() to
     .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)

   - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
     Shimoda)

  TI J721E PCIe driver:

   - Add j721e DT and driver support for 'num-lanes' for devices that
     support x1, x2, or x4 Links (Matt Ranostay)

   - Add j721e DT compatible strings and driver support for j784s4 (Matt
     Ranostay)

   - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
     specific to those TI SoC parts (Peter Robinson)

  TI Keystone PCIe controller driver:

   - Hold power management references to all PHYs while enabling them to
     avoid a race when one provides clocks to others (Siddharth
     Vadapalli)

  Xilinx XDMA PCIe controller driver:

   - Remove redundant dev_err(), since platform_get_irq() and
     platform_get_irq_byname() already log errors (Yang Li)

   - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
     (Krzysztof Wilczyński)

   - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
     irq_domain_add_linear() fails (Harshit Mogalapalli)

  MicroSemi Switchtec management driver:

   - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
     ioremapping in switchtec_pci_probe(). Previously the cleanup was
     done in stdev_release(), which used stale pointers if stdev->cdev
     happened to be open when the PCI device was removed (Daniel
     Stodden)

  Miscellaneous:

   - Convert interrupt terminology from "legacy" to "INTx" to be more
     specific and match spec terminology (Damien Le Moal)

   - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
     deprecated ida_simple_*() API with ida_alloc() and ida_free()
     (Christophe JAILLET)"

* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Fix kernel-doc issues
  PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
  dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
  PCI: mediatek-gen3: Fix translation window size calculation
  PCI: mediatek: Clear interrupt status before dispatching handler
  PCI: keystone: Fix race condition when initializing PHYs
  PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
  PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
  PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
  PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
  PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
  PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
  PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
  PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
  misc: pci_endpoint_test: Use a unique test pattern for each BAR
  PCI: j721e: Make TI J721E depend on ARCH_K3
  PCI: j721e: Add TI J784S4 PCIe configuration
  PCI/AER: Use explicit register sizes for struct members
  PCI/AER: Decode Requester ID when no error info found
  PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
  ...

- Drop unused struct pci_driver.node member (Mathias Krause)

- Fix documentation typos (Attreyee Mukherjee)

- Use a unique test pattern for each BAR in the pci_endpoint_test to make
  it easier to debug address translation issues (Niklas Cassel)

- Fix kernel-doc issues (Bjorn Helgaas)

* pci/misc:
  PCI: Fix kernel-doc issues
  misc: pci_endpoint_test: Use a unique test pattern for each BAR
  docs: PCI: Fix typos
  PCI: Remove unused 'node' member from struct pci_driver

- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated
  ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)

* pci/remove-old-api:
  dw-xdata: Remove usage of the deprecated ida_simple_*() API
  misc: pci_endpoint_test: Remove usage of the deprecated ida_simple_*() API
  PCI: vmd: Remove usage of the deprecated ida_simple_*() API

Pull hardening updates from Kees Cook:

 - Introduce the param_unknown_fn type and other clean ups (Andy
   Shevchenko)

 - Various __counted_by annotations (Christophe JAILLET, Gustavo A. R.
   Silva, Kees Cook)

 - Add KFENCE test to LKDTM (Stephen Boyd)

 - Various strncpy() refactorings (Justin Stitt)

 - Fix qnx4 to avoid writing into the smaller of two overlapping buffers

 - Various strlcpy() refactorings

* tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  qnx4: Use get_directory_fname() in qnx4_match()
  qnx4: Extract dir entry filename processing into helper
  atags_proc: Add __counted_by for struct buffer and use struct_size()
  tracing/uprobe: Replace strlcpy() with strscpy()
  params: Fix multi-line comment style
  params: Sort headers
  params: Use size_add() for kmalloc()
  params: Do not go over the limit when getting the string length
  params: Introduce the param_unknown_fn type
  lkdtm: Add kfence read after free crash type
  nvme-fc: replace deprecated strncpy with strscpy
  nvdimm/btt: replace deprecated strncpy with strscpy
  nvme-fabrics: replace deprecated strncpy with strscpy
  drm/modes: replace deprecated strncpy with strscpy_pad
  afs: Add __counted_by for struct afs_acl and use struct_size()
  VMCI: Annotate struct vmci_handle_arr with __counted_by
  i40e: Annotate struct i40e_qvlist_info with __counted_by
  HID: uhid: replace deprecated strncpy with strscpy
  samples: Replace strlcpy() with strscpy()
  SUNRPC: Replace strlcpy() with strscpy()

Pull MM updates from Andrew Morton:
 "Many singleton patches against the MM code. The patch series which are
  included in this merge do the following:

   - Peng Zhang has done some mapletree maintainance work in the series

	'maple_tree: add mt_free_one() and mt_attr() helpers'
	'Some cleanups of maple tree'

   - In the series 'mm: use memmap_on_memory semantics for dax/kmem'
     Vishal Verma has altered the interworking between memory-hotplug
     and dax/kmem so that newly added 'device memory' can more easily
     have its memmap placed within that newly added memory.

   - Matthew Wilcox continues folio-related work (including a few fixes)
     in the patch series

	'Add folio_zero_tail() and folio_fill_tail()'
	'Make folio_start_writeback return void'
	'Fix fault handler's handling of poisoned tail pages'
	'Convert aops->error_remove_page to ->error_remove_folio'
	'Finish two folio conversions'
	'More swap folio conversions'

   - Kefeng Wang has also contributed folio-related work in the series

	'mm: cleanup and use more folio in page fault'

   - Jim Cromie has improved the kmemleak reporting output in the series
     'tweak kmemleak report format'.

   - In the series 'stackdepot: allow evicting stack traces' Andrey
     Konovalov to permits clients (in this case KASAN) to cause eviction
     of no longer needed stack traces.

   - Charan Teja Kalla has fixed some accounting issues in the page
     allocator's atomic reserve calculations in the series 'mm:
     page_alloc: fixes for high atomic reserve caluculations'.

   - Dmitry Rokosov has added to the samples/ dorectory some sample code
     for a userspace memcg event listener application. See the series
     'samples: introduce cgroup events listeners'.

   - Some mapletree maintanance work from Liam Howlett in the series
     'maple_tree: iterator state changes'.

   - Nhat Pham has improved zswap's approach to writeback in the series
     'workload-specific and memory pressure-driven zswap writeback'.

   - DAMON/DAMOS feature and maintenance work from SeongJae Park in the
     series

	'mm/damon: let users feed and tame/auto-tune DAMOS'
	'selftests/damon: add Python-written DAMON functionality tests'
	'mm/damon: misc updates for 6.8'

   - Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
     memcg: subtree stats flushing and thresholds'.

   - In the series 'Multi-size THP for anonymous memory' Ryan Roberts
     has added a runtime opt-in feature to transparent hugepages which
     improves performance by allocating larger chunks of memory during
     anonymous page faults.

   - Matthew Wilcox has also contributed some cleanup and maintenance
     work against eh buffer_head code int he series 'More buffer_head
     cleanups'.

   - Suren Baghdasaryan has done work on Andrea Arcangeli's series
     'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
     compaction algorithms to move userspace's pages around rather than
     UFFDIO_COPY'a alloc/copy/free.

   - Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
     Add ksm advisor'. This is a governor which tunes KSM's scanning
     aggressiveness in response to userspace's current needs.

   - Chengming Zhou has optimized zswap's temporary working memory use
     in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.

   - Matthew Wilcox has performed some maintenance work on the writeback
     code, both code and within filesystems. The series is 'Clean up the
     writeback paths'.

   - Andrey Konovalov has optimized KASAN's handling of alloc and free
     stack traces for secondary-level allocators, in the series 'kasan:
     save mempool stack traces'.

   - Andrey also performed some KASAN maintenance work in the series
     'kasan: assorted clean-ups'.

   - David Hildenbrand has gone to town on the rmap code. Cleanups, more
     pte batching, folio conversions and more. See the series 'mm/rmap:
     interface overhaul'.

   - Kinsey Ho has contributed some maintenance work on the MGLRU code
     in the series 'mm/mglru: Kconfig cleanup'.

   - Matthew Wilcox has contributed lruvec page accounting code cleanups
     in the series 'Remove some lruvec page accounting functions'"

* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
  mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
  mm, treewide: introduce NR_PAGE_ORDERS
  selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
  selftests/mm: skip test if application doesn't has root privileges
  selftests/mm: conform test to TAP format output
  selftests: mm: hugepage-mmap: conform to TAP format output
  selftests/mm: gup_test: conform test to TAP format output
  mm/selftests: hugepage-mremap: conform test to TAP format output
  mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
  mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
  mm/memcontrol: remove __mod_lruvec_page_state()
  mm/khugepaged: use a folio more in collapse_file()
  slub: use a folio in __kmalloc_large_node
  slub: use folio APIs in free_large_kmalloc()
  slub: use alloc_pages_node() in alloc_slab_page()
  mm: remove inc/dec lruvec page state functions
  mm: ratelimit stat flush from workingset shrinker
  kasan: stop leaking stack trace handles
  mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
  mm/mglru: add dummy pmd_dirty()
  ...

Pull powerpc updates from Michael Ellerman:

 - Add initial support to recognise the HeXin C2000 processor.

 - Add papr-vpd and papr-sysparm character device drivers for VPD &
   sysparm retrieval, so userspace tools can be adapted to avoid doing
   raw firmware calls from userspace.

 - Sched domains optimisations for shared processor partitions on
   P9/P10.

 - A series of optimisations for KVM running as a nested HV under
   PowerVM.

 - Other small features and fixes.

Thanks to Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe
Leroy, Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand,
Gustavo A. R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao,
Kunwu Chan, Li kunyu, Li zeming, Masahiro Yamada, Michal Suchánek,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Randy Dunlap, Sathvika
Vasireddy, Srikar Dronamraju, Stephen Rothwell, Vaibhav Jain, and
Zhao Ke.

* tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (96 commits)
  powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2
  powerpc/86xx: Drop unused CONFIG_MPC8610
  powerpc/powernv: Add error handling to opal_prd_range_is_valid
  selftests/powerpc: Fix spelling mistake "EACCESS" -> "EACCES"
  powerpc/hvcall: Reorder Nestedv2 hcall opcodes
  powerpc/ps3: Add missing set_freezable() for ps3_probe_thread()
  powerpc/mpc83xx: Use wait_event_freezable() for freezable kthread
  powerpc/mpc83xx: Add the missing set_freezable() for agent_thread_fn()
  powerpc/fsl: Fix fsl,tmu-calibration to match the schema
  powerpc/smp: Dynamically build Powerpc topology
  powerpc/smp: Avoid asym packing within thread_group of a core
  powerpc/smp: Add __ro_after_init attribute
  powerpc/smp: Disable MC domain for shared processor
  powerpc/smp: Enable Asym packing for cores on shared processor
  powerpc/sched: Cleanup vcpu_is_preempted()
  powerpc: add cpu_spec.cpu_features to vmcoreinfo
  powerpc/imc-pmu: Add a null pointer check in update_events_in_group()
  powerpc/powernv: Add a null pointer check in opal_powercap_init()
  powerpc/powernv: Add a null pointer check in opal_event_init()
  powerpc/powernv: Add a null pointer check to scom_debug_init_one()
  ...