Pull powerpc fixes from Michael Ellerman:

 - Add handling for a missing instruction in our 32-bit BPF JIT so that
   it can be used for seccomp filtering.

 - Add a missing NULL pointer check before a function call in new EEH
   code.

 - Fix an error path in the new ocxl driver to correctly return EFAULT.

 - The support for the new ibm,drc-info device tree property turns out
   to need several fixes, so for now we just stop advertising to
   firmware that we support it until the bugs can be ironed out.

 - One fix for the new drmem code which was incorrectly modifying the
   device tree in place.

 - Finally two fixes for the RFI flush support, so that firmware can
   advertise to us that it should be disabled entirely so as not to
   affect performance.

Thanks to: Bharata B Rao, Frederic Barrat, Juan J. Alvarez, Mark Lord,
Michael Bringmann.

* tag 'powerpc-4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Support firmware disable of RFI flush
  powerpc/pseries: Support firmware disable of RFI flush
  powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2
  powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
  powerpc/pseries: Revert support for ibm,drc-info devtree property
  powerpc/pseries: Fix duplicate firmware feature for DRC_INFO
  ocxl: Fix potential bad errno on irq allocation
  powerpc/eeh: Fix crashes in eeh_report_resume()

Pull char/misc driver fixes from Greg KH:
 "Here are a handful of char/misc driver fixes for 4.16-rc3.

  There are some binder driver fixes to resolve reported issues in
  stress testing the recent binder changes, some extcon driver fixes,
  and a few mei driver fixes and new device ids.

  All of these, with the exception of the mei driver id additions, have
  been in linux-next for a while. I forgot to push out the mei driver id
  additions to kernel.org until today, but all build tests pass with
  them enabled"

* tag 'char-misc-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: me: add cannon point device ids for 4th device
  mei: me: add cannon point device ids
  mei: set device client to the disconnected state upon suspend.
  ANDROID: binder: synchronize_rcu() when using POLLFREE.
  binder: replace "%p" with "%pK"
  ANDROID: binder: remove WARN() for redundant txn error
  binder: check for binder_thread allocation failure in binder_poll()
  extcon: int3496: process id-pin first so that we start with the right status
  Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()"
  extcon: axp288: Constify the axp288_pwr_up_down_info array

Fix some issues found by a static checker:

When allocating an AFU interrupt, if the driver cannot copy the output
parameters to userland, the errno value was not set to EFAULT

Remove a (now) useless cast.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add cannon point device ids for 4th (itouch) device.

Cc: <stable@vger.kernel.org> 4.14+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add CNP LP and CNP H device ids for cannon lake
and coffee lake platforms.

Cc: <stable@vger.kernel.org> 4.14+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes regression introduced by
commit 8d52af6795c0 ("mei: speed up the power down flow")

In mei_cldev_disable during device power down flow, such as
suspend or system power off, it jumps over disconnecting function
to speed up the power down process, however, because the client is
unlinked from the file_list (mei_cl_unlink) mei_cl_set_disconnected
is not called from mei_cl_all_disconnect leaving resource leaking.
The most visible is reference counter on underlying HW module is
not decreased preventing to remove modules after suspend/resume cycles.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Fixes: 8d52af6795c0 ("mei: speed up the power down flow")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull powerpc fixes from Michael Ellerman:
 "A larger batch of fixes than we'd like. Roughly 1/3 fixes for new
  code, 1/3 fixes for stable and 1/3 minor things.

  There's four commits fixing bugs when using 16GB huge pages on hash,
  caused by some of the preparatory changes for pkeys.

  Two fixes for bugs in the enhanced IRQ soft masking for local_t, one
  of which broke KVM in some circumstances.

  Four fixes for Power9. The most bizarre being a bug where futexes
  stopped working because a NULL pointer dereference didn't trap during
  early boot (it aliased the kernel mapping). A fix for memory hotplug
  when using the Radix MMU, and a fix for live migration of guests using
  the Radix MMU.

  Two fixes for hotplug on pseries machines. One where we weren't
  correctly updating NUMA info when CPUs are added and removed. And the
  other fixes crashes/hangs seen when doing memory hot remove during
  boot, which is apparently a thing people do.

  Finally a handful of build fixes for obscure configs and other minor
  fixes.

  Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Balbir Singh, Colin
  Ian King, Daniel Henrique Barboza, Florian Weimer, Guenter Roeck,
  Harish, Laurent Vivier, Madhavan Srinivasan, Mauricio Faria de
  Oliveira, Nathan Fontenot, Nicholas Piggin, Sam Bobroff"

* tag 'powerpc-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix to use ucontext_t instead of struct ucontext
  powerpc/kdump: Fix powernv build break when KEXEC_CORE=n
  powerpc/pseries: Fix build break for SPLPAR=n and CPU hotplug
  powerpc/mm/hash64: Zero PGD pages on allocation
  powerpc/mm/hash64: Store the slot information at the right offset for hugetlb
  powerpc/mm/hash64: Allocate larger PMD table if hugetlb config is enabled
  powerpc/mm: Fix crashes with 16G huge pages
  powerpc/mm: Flush radix process translations when setting MMU type
  powerpc/vas: Don't set uses_vas for kernel windows
  powerpc/pseries: Enable RAS hotplug events later
  powerpc/mm/radix: Split linear mapping on hot-unplug
  powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID
  ocxl: fix signed comparison with less than zero
  powerpc/64s: Fix may_hard_irq_enable() for PMI soft masking
  powerpc/64s: Fix MASKABLE_RELON_EXCEPTION_HV_OOL macro
  powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull virtio/vhost updates from Michael Tsirkin:
 "virtio, vhost: fixes, cleanups, features

  This includes the disk/cache memory stats for for the virtio balloon,
  as well as multiple fixes and cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: don't hold onto file pointer for VHOST_SET_LOG_FD
  vhost: don't hold onto file pointer for VHOST_SET_VRING_ERR
  vhost: don't hold onto file pointer for VHOST_SET_VRING_CALL
  ringtest: ring.c malloc & memset to calloc
  virtio_vop: don't kfree device on register failure
  virtio_pci: don't kfree device on register failure
  virtio: split device_register into device_initialize and device_add
  vhost: remove unused lock check flag in vhost_dev_cleanup()
  vhost: Remove the unused variable.
  virtio_blk: print capacity at probe time
  virtio: make VIRTIO a menuconfig to ease disabling it all
  virtio/ringtest: virtio_ring: fix up need_event math
  virtio/ringtest: fix up need_event math
  virtio: virtio_mmio: make of_device_ids const.
  firmware: Use PTR_ERR_OR_ZERO()
  virtio-mmio: Use PTR_ERR_OR_ZERO()
  vhost/scsi: Improve a size determination in four functions
  virtio_balloon: include disk/file caches memory statistics

Currently the comparison of used < 0 is always false because
uses is a size_t. Fix this by making used a ssize_t type.

Detected by Coccinelle:
drivers/misc/ocxl/file.c:320:6-10: WARNING: Unsigned expression
compared with zero: used < 0

Fixes: 5ef3166e8a32 ("ocxl: Driver code for 'generic' opencapi devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>