linux.git/drivers/misc/eeprom, branch v4.14-rc4

eeprom: idt_89hpesx: Support both ACPI and OF probing

2017-08-31T16:49:41+00:00

Allow the idt_89hpesx driver to get information from child nodes from
both OF and ACPI by using more generic fwnode_property_read*() functions.

Below is an example of instantiating idt_89hpesx driver via ACPI Table:

Device(IDT0) {
 Name(_HID, "PRP0001")
 Name(_CID, "PRP0001")
 Name(_CCA, ONE)
 Name(_STR, Unicode("IDT SW I2C Slave"))
 Name(_CRS, ResourceTemplate () {
  I2cSerialBus (0x74, ControllerInitiated, 1000,
   AddressingMode7Bit, "\\_SB.I2CS",
   0x00, ResourceConsumer, ,
  )
 })
 Name (_DSD, Package () {
  ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
  Package () {
   Package () {"compatible", "idt,89hpes32nt8ag2"},
  },
 })
 Device (EPR0) {
  Name (_DSD, Package () {
   ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
   Package () {
    Package () {"compatible", "onsemi,24c64"},
    Package () {"reg", 0x50},
   }
  })
 }
}

Signed-off-by: Huy Duong 
Acked-by: Serge Semin 
Signed-off-by: Greg Kroah-Hartman

misc: Convert to using %pOF instead of full_name

2017-08-28T14:55:49+00:00

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring 
Cc: Arnd Bergmann 
Cc: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

MISC: add const to bin_attribute structures

2017-08-28T14:55:48+00:00

Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file. The arguments passed are of
type const, so declare the structures to be const.

Done using Coccinelle.

@m disable optional_qualifier@
identifier s;
position p;
@@
static struct bin_attribute s@p={...};

@okay1@
position p;
identifier m.s;
@@
(
sysfs_create_bin_file(...,&s@p,...)
|
sysfs_remove_bin_file(...,&s@p,...)
)

@bad@
position p!={m.p,okay1.p};
identifier m.s;
@@
s@p

@change depends on !bad disable optional_qualifier@
identifier m.s;
@@
static
+const
struct bin_attribute s={...};

Signed-off-by: Bhumika Goyal 
Reviewed-by: Jean Delvare 
Signed-off-by: Greg Kroah-Hartman

misc: eeprom_93xx46: Simplify the usage of gpiod API

2017-08-28T14:55:47+00:00

Commit 3ca9b1ac28398c ("misc: eeprom_93xx46: Add support for a GPIO
'select' line.") introduced the optional usage of 'select-gpios'
by using the gpiod API in a convoluted way.

Rewrite the gpiod handling to make the code simpler.

Signed-off-by: Fabio Estevam 
Signed-off-by: Greg Kroah-Hartman

eeprom: idt_89hpesx: Add OF device ID table

2017-04-08T16:22:59+00:00

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas 
Acked-by: Arnd Bergmann 
Acked-by: Serge Semin 
Signed-off-by: Greg Kroah-Hartman

sched/headers: Prepare to remove inclusion from

2017-03-02T07:42:31+00:00

Add #include  dependencies to all .c files rely on sched.h
doing that for them.

Note that even if the count where we need to add extra headers seems high,
it's still a net win, because  is included in over
2,200 files ...

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

Merge branch 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2017-02-25T22:21:18+00:00

Pull i2c updates from Wolfram Sang:
 "I2C has for you two new drivers (Tegra BPMP and STM32F4), interrupt
  support for pca954x muxes, and a bunch of driver bugfixes and
  improvements. Nothing really special this cycle.

  A few commits have been added to my tree just recently. Those are the
  Tegra BPMP driver and a few straightforward bugfixes or cleanups which
  I prefer to have upstream rather soonish. The rest had proper
  linux-next exposure"

* 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (25 commits)
  i2c: thunderx: Replace pci_enable_msix()
  i2c: exynos5: fix arbitration lost handling
  i2c: exynos5: disable fifo-almost-empty irq signal when necessary
  i2c: at91: ensure state is restored after suspending
  i2c: bcm2835: Avoid possible NULL ptr dereference
  i2c: Add Tegra BPMP I2C proxy driver
  dt-bindings: Add Tegra186 BPMP I2C binding
  misc: eeprom: at24: use device_property_*() functions instead of of_get_property()
  i2c: mux: pca954x: Add interrupt controller support
  dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
  i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
  i2c: riic: correctly finish transfers
  i2c: i801: Add support for Intel Gemini Lake
  i2c: mux: pca9541: Export OF device ID table as module aliases
  i2c: mux: pca954x: Export OF device ID table as module aliases
  i2c: mux: mlxcpld: remove unused including 
  i2c: busses: constify i2c_algorithm structures
  i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio
  i2c: sh_mobile: document support for r8a7796 (R-Car M3-W)
  i2c: i2c-cros-ec-tunnel: Reduce logging noise
  ...

misc: eeprom: at24: use device_property_*() functions instead of of_get_property()

2017-02-11T20:23:43+00:00

Allow the at24 driver to get configuration information from both OF and
ACPI by using the more generic device_property functions.
This change was inspired by the at25.c driver.

I have a custom board with a ST M24C02 EEPROM attached to an I2C bus.
With the following ACPI construct, this patch instantiates a working
instance of the driver.

Device (EEP0) {
 Name (_HID, "PRP0001")
 Name (_DSD, Package () {
  ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
  Package () {
   Package () {"compatible", Package () {"st,24c02"}},
   Package () {"pagesize", 16},
  },
 })
 Name (_CRS, ResourceTemplate () {
  I2cSerialBus (
   0x0057, ControllerInitiated, 400000,
   AddressingMode7Bit, "\\_SB.PCI0.I2C3", 0x00,
   ResourceConsumer,,)
 })
}

Signed-off-by: Ben Gardner 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Wolfram Sang

eeprom: idt_89hpesx: Drop kfree for memory allocated with devm_kzalloc

2017-01-27T08:13:57+00:00

It's not necessary to free memory allocated with devm_kzalloc
and using kfree leads to a double free.

Fixes: cfad6425382e ("eeprom: Add IDT 89HPESx EEPROM/CSR driver")
Signed-off-by: Wei Yongjun 
Signed-off-by: Dan Carpenter 
Acked-by: Serge Semin 
Signed-off-by: Greg Kroah-Hartman

eeprom: idt_89hpesx: Discard memory freeing allocated by devm_kmalloc

2017-01-27T08:13:57+00:00

Indeed, the data structure is allocated by device resource manager,
so the driver doesn't need to free anything on remove() callback.

Reported-by: Julia Lawall 
Signed-off-by: Serge Semin 
Signed-off-by: Greg Kroah-Hartman