Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull ARM SoC updates from Arnd Bergmann:
 "One new platform gets added, the Realtek RTD1195, which is an older
  Cortex-a7 based relative of the RTD12xx chips that are already
  supported in arch/arm64. The platform may also be extended to support
  running 32-bit kernels on those 64-bit chips for memory-constrained
  machines.

  In the Renesas shmobile platform, we gain support for "RZ/G1H" or
  R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
  originally released in 2016 as one of the last high-end 32-bit
  designs.

  There is ongoing cleanup for the integrator, tegra, imx, and omap2
  platforms, with integrator getting very close to the goal of having
  zero code in arch/arm/, and omap2 moving more of the chip specifics
  from old board code into device tree files.

  The Versatile Express platform is made more modular, with built-in
  drivers now becoming loadable modules. This is part of a greater
  effort for the Android OS to have a common kernel binary for all
  platforms and any platform specific code in loadable modules.

  The PXA platform drops support for Compulab's pxa2xx boards that had
  rather unusual flash and PCI drivers but no known users remaining. All
  device drivers specific to those boards can now get removed as well.

  Across platforms, there is ongoing cleanup, with Geert and Rob
  revisiting some a lot of Kconfig options"

* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
  ARM: omap2: fix omap5_realtime_timer_init definition
  ARM: zynq: Don't select CONFIG_ICST
  ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
  clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
  ARM: davinci: fix build failure without I2C
  power: reset: vexpress: fix build issue
  power: vexpress: cleanup: use builtin_platform_driver
  power: vexpress: add suppress_bind_attrs to true
  Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
  MAINTAINERS: pxa: remove Compulab arm/pxa support
  ARM: pxa: remove Compulab pxa2xx boards
  bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
  soc: imx: move cpu code to drivers/soc/imx
  ARM: imx: move cpu definitions into a header
  ARM: imx: use device_initcall for imx_soc_device_init
  ARM: imx: pcm037: make pcm970_sja1000_platform_data static
  bus: ti-sysc: Timers no longer need legacy quirk handling
  ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
  ARM: dts: Configure system timers for omap2
  ARM: dts: Configure system timers for ti81xx
  ...

Add MFD driver for mt6360 pmic chip include Battery Charger/
USB_PD/Flash, LED/RGB and LED/LDO/Buck

Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mp2629 is a highly-integrated switching-mode battery charge management
device for single-cell Li-ion or Li-polymer battery.

Add MFD core enables chip access for ADC driver for battery readings,
and a power supply battery-charger driver

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The Gateworks System Controller (GSC) is an I2C slave controller
implemented with an MSP430 micro-controller whose firmware embeds the
following features:
 - I/O expander (16 GPIO's) using PCA955x protocol
 - Real Time Clock using DS1672 protocol
 - User EEPROM using AT24 protocol
 - HWMON using custom protocol
 - Interrupt controller with tamper detect, user pushbotton
 - Watchdog controller capable of full board power-cycle
 - Power Control capable of full board power-cycle

see http://trac.gateworks.com/wiki/gsc for more details

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Enable building the vexpress-sysreg driver as a module.

As deferred probe between the vexpress components works now, we don't
need to create struct devices early with of_platform_device_create().

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Nothing in the VExpress sysregs nor the MFD child drivers use
CONFIG_CLKSRC_MMIO. There's the 24MHz counter, but that's handled by
drivers/clocksource/timer-versatile.c which doesn't use
CONFIG_CLKSRC_MMIO either. So let's just drop CONFIG_CLKSRC_MMIO.

As the !ARCH_USES_GETTIMEOFFSET dependency was added for
CONFIG_CLKSRC_MMIO, that can be dropped, too.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

This driver only creates a bunch of platform devices sharing resources
belonging to the PMC device. This is pretty much what MFD subsystem is
for so move the driver there, renaming it to intel_pmc_bxt.c which
should be more clear what it is.

MFD subsystem provides nice helper APIs for subdevice creation so
convert the driver to use those. Unfortunately the ACPI device includes
separate resources for most of the subdevices so we cannot simply call
mfd_add_devices() to create all of them but instead we need to call it
separately for each device.

The new MFD driver continues to expose two sysfs attributes that allow
userspace to send IPC commands to the PMC/SCU to avoid breaking any
existing applications that may use these. Generally this is bad idea so
document this in the ABI documentation.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The SCU IPC functionality is usable outside of Intel MID devices. For
example modern Intel CPUs include the same thing but now it is called
PMC (Power Management Controller) instead of SCU. To make the IPC
available for those split the driver into core part (intel_scu_ipc.c)
and the SCU PCI driver part (intel_scu_pcidrv.c) which then calls the
former before it goes and creates rest of the SCU devices. The SCU IPC
will also register a new class that gets assigned to the device that is
created under the parent PCI device.

We also split the Kconfig symbols so that INTEL_SCU_IPC enables the SCU
IPC library and INTEL_SCU_PCI the SCU driver and convert the users
accordingly. While there remove default y from the INTEL_SCU_PCI symbol
as it is already selected by X86_INTEL_MID.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>