Pull ARM SoC driver updates from Kevin Hilman:
 "Some of these are for drivers/soc, where we're now putting
  SoC-specific drivers these days.  Some are for other driver subsystems
  where we have received acks from the appropriate maintainers.

  Some highlights:

   - simple-mfd: document DT bindings and misc updates
   - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
   - memory: support for Tegra132 SoC
   - memory: introduce tegra EMC driver for scaling memory frequency
   - misc. updates for ARM CCI and CCN busses"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: soc: sunxi: Introduce SoC driver to map SRAMs
  arm-cci: Add aliases for PMU events
  arm-cci: Add CCI-500 PMU support
  arm-cci: Sanitise CCI400 PMU driver specific code
  arm-cci: Abstract handling for CCI events
  arm-cci: Abstract out the PMU counter details
  arm-cci: Cleanup PMU driver code
  arm-cci: Do not enable CCI-400 PMU by default
  firmware: qcom: scm: Add HDCP Support
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: remove useless chip and system ctrl compatibles
  clk: berlin: drop direct of_iomap of nodes reg property
  ARM: berlin: move BG2Q clock node
  ARM: berlin: move BG2CD clock node
  ARM: berlin: move BG2 clock node
  clk: berlin: prepare simple-mfd conversion
  pinctrl: berlin: drop SoC stub provided regmap
  ARM: berlin: move pinctrl to simple-mfd nodes
  pinctrl: berlin: prepare to use regmap provided by syscon
  reset: berlin: drop arch_initcall initialization
  ...

We support decoding the bootloader values if DEBUG is defined.
But we also need to change the struct omap_hwmod flags to have
HWMOD_INIT_NO_RESET to avoid the GPMC being reset during the
boot. Otherwise just the default timings will be displayed
instead of the bootloader configured timings.

This also allows us to clean up the various GPMC related
hwmod flags. For debugging, we only need HWMOD_INIT_NO_RESET,
and HWMOD_INIT_NO_IDLE is not needed.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Merge "ARM: tegra: Add EMC driver for v4.2-rc1" from Thierry Reding:

This introduces the EMC driver that's required to scale the external
memory frequency.

* tag 'tegra-for-4.2-emc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  memory: tegra: Add EMC frequency debugfs entry
  memory: tegra: Add EMC (external memory controller) driver
  memory: tegra: Add API needed by the EMC driver
  of: Add Tegra124 EMC bindings
  of: Document timings subnode of nvidia,tegra-mc

This file in debugfs can be used to get or set the EMC frequency.
Reading the file will return the currently set frequency in Hz, while
writing the file sets the specified frequency rounded to the next
highest frequency supported by the board.

Will be very useful when tuning memory scaling.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
[treding@nvidia.com: add "emc" debugfs directory]
Signed-off-by: Thierry Reding <treding@nvidia.com>

Implements functionality needed to change the rate of the memory bus
clock.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The EMC driver needs to know the number of external memory devices and
also needs to update the EMEM configuration based on the new rate of the
memory bus.

To know how to update the EMEM config, looks up the values of the burst
regs in the DT, for a given timing.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

As this interrupt is just for development purposes, as the TRM says, and
the sheer amount of interrupts fired can seriously disrupt userspace
when testing the lower frequencies supported by the EMC.

From the TRM:

"There is one performance warning type interrupt: ARBITRATION_EMEM. It
fires when the MC detects that a request has been pending in the Row
Sorter long enough to hit the DEADLOCK_PREVENTION_SLACK_THRESHOLD. In
addition to true performance problems, this interrupt may fire in
situations such as clock-change where the EMC backpressures pending
traffic for long periods of time. This interrupt helps developers
identify and debug performance issues and configuration issues."

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The memory controller on Tegra132 is very similar to the one found on
Tegra124. But the Denver CPUs don't have an outer cache, so dcache
maintenance is done slightly differently.

Signed-off-by: Thierry Reding <treding@nvidia.com>

Subsequent patches will add debugfs files that print the status of the
SWGROUPs. Add a new names field and complement the SoC tables with the
names of the individual SWGROUPs.

Signed-off-by: Thierry Reding <treding@nvidia.com>

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for v4.1.  Some of these are for drivers/soc, where we
  find more and more SoC-specific drivers these days.  Some are for
  other driver subsystems where we have received acks from the
  appropriate maintainers.

  The larger parts of this branch are:

   - MediaTek support for their PMIC wrapper interface, a high-level
     interface for talking to the system PMIC over a dedicated I2C
     interface.

   - Qualcomm SCM driver has been moved to drivers/firmware.  It's used
     for CPU up/down and needs to be in a shared location for arm/arm64
     common code.

   - cleanup of ARM-CCI PMU code.

   - another set of cleanusp to the OMAP GPMC code"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  soc/mediatek: Remove unused variables
  clocksource: atmel-st: select MFD_SYSCON
  soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs
  arm-cci: Fix CCI PMU event validation
  arm-cci: Split the code for PMU vs driver support
  arm-cci: Get rid of secure transactions for PMU driver
  arm-cci: Abstract the CCI400 PMU specific definitions
  arm-cci: Rearrange code for splitting PMU vs driver code
  drivers: cci: reject groups spanning multiple HW PMUs
  ARM: at91: remove useless include
  clocksource: atmel-st: remove mach/hardware dependency
  clocksource: atmel-st: use syscon/regmap
  ARM: at91: time: move the system timer driver to drivers/clocksource
  ARM: at91: properly initialize timer
  ARM: at91: at91rm9200: remove deprecated arm_pm_restart
  watchdog: at91rm9200: implement restart handler
  watchdog: at91rm9200: use the system timer syscon
  mfd: syscon: Add atmel system timer registers definition
  ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  soc: qcom: gsbi: Add support for ADM CRCI muxing
  ...