When CONFIG_OF is disabled, the 'data' variable is not used at all
because of_match_node() turns into a dummy macro:

drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c: In function 'mdp_comp_sub_create':
drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:1038:36: error: unused variable 'data' [-Werror=unused-variable]
 1038 |  const struct mtk_mdp_driver_data *data = mdp->mdp_data;
      |                                    ^~~~

Remove the variable again by moving the pointer dereference into the
of_match_node call.

Fixes: b385b991ef2f ("media: platform: mtk-mdp3: chip config split about subcomponents")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

gcc warns about some functions being unused when CONFIG_PM_SLEEP
is disabled:

drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c:328:12: error: 'mxc_isi_pm_resume' defined but not used [-Werror=unused-function]
  328 | static int mxc_isi_pm_resume(struct device *dev)
      |            ^~~~~~~~~~~~~~~~~
drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c:314:12: error: 'mxc_isi_pm_suspend' defined but not used [-Werror=unused-function]
  314 | static int mxc_isi_pm_suspend(struct device *dev)
      |            ^~~~~~~~~~~~~~~~~~

Use the modern SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() helpers in place
of the old SET_SYSTEM_SLEEP_PM_OPS()/SET_RUNTIME_PM_OPS() ones.

By convention, use pm_ptr() to guard the reference to the operations.
This makes no difference as long as the driver requires CONFIG_PM,
but is what users of SET_RUNTIME_PM_OPS() are supposed to do.

Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

When adding proper support for V4L2_FIELD_ALTERNATE it was missed that
this field format should trigger an interrupt for each field, not just
for the whole frame. Fix this by marking it as progressive in the
capture setup, which will then select the correct interrupt mode.

Tested on both Gen2 and Gen3 with the result of a doubling of the frame
rate for V4L2_FIELD_ALTERNATE. From a PAL video source the frame rate is
now 50, which is expected for alternate field capture.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

When doing format validation for NV12 the width and height should be
aligned to 32 pixels.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

The VIN modules on Gen3 can not scale NV12, fail format validation if
the user tries. Currently no frames are produced if this is attempted.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

The #if check is wrong, leading to a build failure:

  drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c: In function 'mxc_isi_channel_set_inbuf':
  drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:33:5: error: "CONFIG_ARCH_DMA_ADDR_T_64BIT" is not defined, evaluates to 0 [-Werror=undef]
     33 | #if CONFIG_ARCH_DMA_ADDR_T_64BIT
        |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

This could just be an #ifdef, but it seems nicer to just remove the
check entirely.  Apparently the only reason for the #ifdef is to avoid
another warning:

  drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:55:24: error: right shift count >= width of type [-Werror=shift-count-overflow]

But this is best avoided by using the lower_32_bits()/upper_32_bits()
helpers.

Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull iommu updates from Joerg Roedel:

 - Convert to platform remove callback returning void

 - Extend changing default domain to normal group

 - Intel VT-d updates:
     - Remove VT-d virtual command interface and IOASID
     - Allow the VT-d driver to support non-PRI IOPF
     - Remove PASID supervisor request support
     - Various small and misc cleanups

 - ARM SMMU updates:
     - Device-tree binding updates:
         * Allow Qualcomm GPU SMMUs to accept relevant clock properties
         * Document Qualcomm 8550 SoC as implementing an MMU-500
         * Favour new "qcom,smmu-500" binding for Adreno SMMUs

     - Fix S2CR quirk detection on non-architectural Qualcomm SMMU
       implementations

     - Acknowledge SMMUv3 PRI queue overflow when consuming events

     - Document (in a comment) why ATS is disabled for bypass streams

 - AMD IOMMU updates:
     - 5-level page-table support
     - NUMA awareness for memory allocations

 - Unisoc driver: Support for reattaching an existing domain

 - Rockchip driver: Add missing set_platform_dma_ops callback

 - Mediatek driver: Adjust the dma-ranges

 - Various other small fixes and cleanups

* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
  iommu: Remove iommu_group_get_by_id()
  iommu: Make iommu_release_device() static
  iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
  iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
  iommu/vt-d: Remove BUG_ON in map/unmap()
  iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
  iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
  iommu/vt-d: Remove BUG_ON on checking valid pfn range
  iommu/vt-d: Make size of operands same in bitwise operations
  iommu/vt-d: Remove PASID supervisor request support
  iommu/vt-d: Use non-privileged mode for all PASIDs
  iommu/vt-d: Remove extern from function prototypes
  iommu/vt-d: Do not use GFP_ATOMIC when not needed
  iommu/vt-d: Remove unnecessary checks in iopf disabling path
  iommu/vt-d: Move PRI handling to IOPF feature path
  iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
  iommu/vt-d: Move iopf code from SVA to IOPF enabling path
  iommu/vt-d: Allow SVA with device-specific IOPF
  dmaengine: idxd: Add enable/disable device IOPF feature
  arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
  ...

Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.4-rc1.

  Once again, a busy development cycle, with lots of changes happening
  in the driver core in the quest to be able to move "struct bus" and
  "struct class" into read-only memory, a task now complete with these
  changes.

  This will make the future rust interactions with the driver core more
  "provably correct" as well as providing more obvious lifetime rules
  for all busses and classes in the kernel.

  The changes required for this did touch many individual classes and
  busses as many callbacks were changed to take const * parameters
  instead. All of these changes have been submitted to the various
  subsystem maintainers, giving them plenty of time to review, and most
  of them actually did so.

  Other than those changes, included in here are a small set of other
  things:

   - kobject logging improvements

   - cacheinfo improvements and updates

   - obligatory fw_devlink updates and fixes

   - documentation updates

   - device property cleanups and const * changes

   - firwmare loader dependency fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
  device property: make device_property functions take const device *
  driver core: update comments in device_rename()
  driver core: Don't require dynamic_debug for initcall_debug probe timing
  firmware_loader: rework crypto dependencies
  firmware_loader: Strip off \n from customized path
  zram: fix up permission for the hot_add sysfs file
  cacheinfo: Add use_arch[|_cache]_info field/function
  arch_topology: Remove early cacheinfo error message if -ENOENT
  cacheinfo: Check cache properties are present in DT
  cacheinfo: Check sib_leaf in cache_leaves_are_shared()
  cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
  cacheinfo: Add arm64 early level initializer implementation
  cacheinfo: Add arch specific early level initializer
  tty: make tty_class a static const structure
  driver core: class: remove struct class_interface * from callbacks
  driver core: class: mark the struct class in struct class_interface constant
  driver core: class: make class_register() take a const *
  driver core: class: mark class_release() as taking a const *
  driver core: remove incorrect comment for device_create*
  MIPS: vpe-cmp: remove module owner pointer from struct class usage.
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the large set of USB and Thunderbolt changes for 6.4-rc1.

  The "biggest" thing in here is the removal of two obsolete drivers,
  u132-hcd and ftdi-elan, making this a net-removal of code overall.

  Other than the driver removals, included in here are:

   - Thunderbolt updates for new hardware and features

   - xhci driver updates and fixes

   - dwc3 driver updates and fixes

   - gadget core and driver updates and features added

   - mtu3 driver updates

   - dwc2 driver fixes and updates

   - usb-serial driver updates

   - typec driver updates and fixes

   - platform remove callback changes

   - dts updates and conversions

   - other small changes

  All have been in linux-next for a while with no reported problems"

* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
  usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
  usb: dwc3: gadget: Execute gadget stop after halting the controller
  media: radio-shark: Add endpoint checks
  USB: sisusbvga: Add endpoint checks
  USB: core: Add routines for endpoint checks in old drivers
  usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
  dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
  usb: dwc3: core: add support for disabling High-speed park mode
  dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
  usb: mtu3: add optional clock xhci_ck and frmcnt_ck
  dt-bindings: usb: mtu3: add two optional clocks
  usb: mtu3: expose role-switch control to userspace
  usb: mtu3: unlock @mtu->lock just before giving back request
  usb: mtu3: fix kernel panic at qmu transfer done irq handler
  usb: mtu3: use boolean return value
  usb: mtu3: give back request when rx error happens
  usb: chipidea: fix missing goto in `ci_hdrc_probe`
  usb: gadget: udc: core: Prevent redundant calls to pullup
  usb: gadget: udc: core: Invoke usb_gadget_connect only when started
  usb: typec: ucsi: don't print PPM init deferred errors
  ...

Pull gpio updates from Bartosz Golaszewski:
 "We have some new drivers, significant refactoring of existing intel
  platforms, lots of improvements all around, mass conversion to using
  immutable irqchips by drivers that had not been converted individually
  yet and some changes in the core library code.

  Summary:

  New drivers:
   - add a driver for the Loongson GPIO controller
   - add a driver for the fxl6408 I2C GPIO expander
   - add a GPIO module containing code common for Intel Elkhart Lake and
     Merrifield platforms
   - add a driver for the Intel Elkhart Lake platform reusing the code
     from the intel tangier library

  GPIOLIB core:
   - GPIO ACPI improvements
   - simplify gpiochip_add_data_with_keys() fwnode handling
   - cleanup header inclusions (remove unneeded ones, order the rest
     alphabetically)
   - remove duplicate code (reuse krealloc() instead of open-coding it,
     drop a duplicated check in gpiod_find_and_request())
   - reshuffle the code to remove unnecessary forward declarations
   - coding style cleanups and improvements
   - add a helper for accessing device fwnodes
   - small updates in docs

  Driver improvements:
   - convert all remaining GPIO irqchip drivers to using immutable
     irqchips
   - drop unnecessary of_match_ptr() macro expansions
   - shrink the code in gpio-merrifield significantly by reusing the
     code from gpio-tangier + minor tweaks to the driver code
   - remove MODULE_LICENSE() from drivers that can only be built-in
   - add device-tree support to gpio-loongson1
   - use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
   - minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
     gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
   - shrink code in gpio-ich and gpio-pxa
   - Kconfig tweak for gpio-pmic-eic-sprd"

* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
  gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
  gpiolib: Add gpiochip_set_data() helper
  gpiolib: Move gpiochip_get_data() higher in the code
  gpiolib: Check array_info for NULL only once in gpiod_get_array()
  gpiolib: Replace open coded krealloc()
  gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
  gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
  gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
  gpio: mm-lantiq: Fix typo in the newly added header filename
  sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
  powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
  gpio: xlp: Convert to immutable irq_chip
  gpio: xilinx: Convert to immutable irq_chip
  gpio: xgs-iproc: Convert to immutable irq_chip
  gpio: visconti: Convert to immutable irq_chip
  gpio: tqmx86: Convert to immutable irq_chip
  gpio: thunderx: Convert to immutable irq_chip
  gpio: stmpe: Convert to immutable irq_chip
  gpio: siox: Convert to immutable irq_chip
  gpio: rda: Convert to immutable irq_chip
  ...