Pull OMAP3 updates from Mauro Carvalho Chehab:
 "Some driver improvements on OMAP3.  This series depend on some iommu
  patches already merged"

* 'topic/omap3isp' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (26 commits)
  [media] omap3isp: Rename isp_buffer isp_addr field to dma
  [media] omap3isp: Move to videobuf2
  [media] v4l: vb2: Add a function to discard all DONE buffers
  [media] omap3isp: Cancel all queued buffers when stopping the video stream
  [media] omap3isp: Move buffer irqlist to isp_buffer structure
  [media] omap3isp: Move queue irqlock to isp_video structure
  [media] omap3isp: Move queue mutex to isp_video structure
  [media] omap3isp: queue: Don't build scatterlist for kernel buffer
  [media] omap3isp: Use the ARM DMA IOMMU-aware operations
  [media] omap3isp: queue: Use sg_alloc_table_from_pages()
  [media] omap3isp: queue: Map PFNMAP buffers to device
  [media] omap3isp: queue: Fix the dma_map_sg() return value check
  [media] omap3isp: queue: Allocate kernel buffers with dma_alloc_coherent
  [media] omap3isp: queue: Inline the ispmmu_v(un)map functions
  [media] omap3isp: queue: Merge the prepare and sglist functions
  [media] omap3isp: queue: Use sg_table structure
  [media] omap3isp: queue: Move IOMMU handling code to the queue
  [media] omap3isp: video: Set the buffer bytesused field at completion time
  [media] omap3isp: ccdc: Use the DMA API for FPC
  [media] omap3isp: ccdc: Use the DMA API for LSC
  ...

Pull updates and DT support for media engines from Mauro Carvalho Chehab.

For Analog Devices ADV7604 and the Renesas VSP1 video processing engines.

* 'topic/vsp1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] v4l: vsp1: Add DT support
  [media] v4l: vsp1: Add DT bindings documentation
  [media] v4l: vsp1: Add BRU support
  [media] v4l: vsp1: Support multi-input entities
  [media] v4l: vsp1: uds: Enable scaling of alpha layer
  [media] v4l: vsp1: Remove unexisting rt clocks

* 'topic/adv76xx' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (21 commits)
  [media] adv7604: Add LLC polarity configuration
  [media] adv7604: Set HPD GPIO direction to output
  [media] adv7604: Add endpoint properties to DT bindings
  [media] adv7604: Add DT support
  [media] adv7604: Specify the default input through platform data
  [media] adv7604: Support hot-plug detect control through a GPIO
  [media] adv7604: Sort headers alphabetically
  [media] adv7604: Replace *_and_or() functions with *_clr_set()
  [media] adv7604: Store I2C addresses and clients in arrays
  [media] adv7604: Inline the to_sd function
  [media] v4l: subdev: Remove deprecated video-level DV timings operations
  [media] adv7604: Remove deprecated video-level DV timings operations
  [media] adv7604: Add pad-level DV timings support
  [media] adv7604: Make output format configurable through pad format operations
  [media] adv7604: Add sink pads
  [media] adv7604: Remove subdev control handlers
  [media] adv7604: Add adv7611 support
  [media] adv7604: Cache register contents when reading multiple bits
  [media] adv7604: Add 16-bit read functions for CP and HDMI
  [media] adv7604: Don't put info string arrays on the stack
  ...

Pull media updates from Mauro Carvalho Chehab:
 "This contains:
   - a new frontend/tuner driver set for si2168 and sa2157
   - Videobuf 2 core now supports DVB too
   - A new gspca sub-driver (dtcs033)
   - saa7134 is now converted to use videobuf2
   - add support for 4K timings
   - several other driver fixes and improvements

  PS.  This pull request is shorter than usual, partly because I have
  some other patches on topic branches that I'll be sending you later
  this week"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (286 commits)
  [media] au0828-dvb: restore its permission to 644
  [media] xc5000: delay tuner sleep to 5 seconds
  [media] xc5000: Don't use whitespace before tabs
  [media] xc5000: fix CamelCase
  [media] xc5000: Don't wrap msleep()
  [media] xc5000: get rid of positive error codes
  [media] au0828: reset streaming when a new frequency is set
  [media] au0828: Improve debug messages for urb_completion
  [media] au0828: Cancel stream-restart operation if frontend is disconnected
  [media] dib0700: fix RC support on Hauppauge Nova-TD
  [media] USB: as102_usb_drv.c: Remove useless return variables
  [media] v4l: Fix documentation of V4L2_PIX_FMT_H264_MVC and VP8 pixel formats
  [media] m5mols: Replace missing header
  [media] staging: lirc: Fix sparse warnings
  [media] fix mceusb endpoint type identification/handling
  [media] az6027: Added the PID for a new revision of the Elgato EyeTV Sat DVB-S Tuner
  [media] DocBook media: fix typo
  [media] adv7604: Add missing include to linux/types.h
  [media] v4l: Validate fields in the core code for subdev EDID ioctls
  [media] v4l: Add support for DV timings ioctls on subdev nodes
  ...

A previous patch mistakenly changed the file permission to 755.
Restore it to 644.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Pull core locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - reduced/streamlined smp_mb__*() interface that allows more usecases
     and makes the existing ones less buggy, especially in rarer
     architectures

   - add rwsem implementation comments

   - bump up lockdep limits"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  rwsem: Add comments to explain the meaning of the rwsem's count field
  lockdep: Increase static allocations
  arch: Mass conversion of smp_mb__*()
  arch,doc: Convert smp_mb__*()
  arch,xtensa: Convert smp_mb__*()
  arch,x86: Convert smp_mb__*()
  arch,tile: Convert smp_mb__*()
  arch,sparc: Convert smp_mb__*()
  arch,sh: Convert smp_mb__*()
  arch,score: Convert smp_mb__*()
  arch,s390: Convert smp_mb__*()
  arch,powerpc: Convert smp_mb__*()
  arch,parisc: Convert smp_mb__*()
  arch,openrisc: Convert smp_mb__*()
  arch,mn10300: Convert smp_mb__*()
  arch,mips: Convert smp_mb__*()
  arch,metag: Convert smp_mb__*()
  arch,m68k: Convert smp_mb__*()
  arch,m32r: Convert smp_mb__*()
  arch,ia64: Convert smp_mb__*()
  ...

Pull USB driver updates from Greg KH:
 "Here is the big USB driver pull request for 3.16-rc1.

  Nothing huge here, but lots of little things in the USB core, and in
  lots of drivers.  Hopefully the USB power management will be work
  better now that it has been reworked to do per-port power control
  dynamically.  There's also a raft of gadget driver updates and fixes,
  CONFIG_USB_DEBUG is finally gone now that everything has been
  converted over to the dynamic debug inteface, the last hold-out
  drivers were cleaned up and the config option removed.  There were
  also other minor things all through the drivers/usb/ tree, the
  shortlog shows this pretty well.

  All have been in linux-next, including the very last patch, which came
  from linux-next to fix a build issue on some platforms"

* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
  usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
  USB: orinoco_usb: remove CONFIG_USB_DEBUG support
  USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
  USB: media: streamzap: remove CONFIG_USB_DEBUG
  USB: media: redrat3: remove CONFIG_USB_DEBUG usage
  USB: media: redrat3: remove unneeded tracing macro
  usb: qcserial: add additional Sierra Wireless QMI devices
  usb: host: max3421-hcd: Use module_spi_driver
  usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
  usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
  usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
  usb: qcserial: add Netgear AirCard 341U
  Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
  usb: host: xhci-plat: add xhci_plat_start()
  usb: host: max3421-hcd: Fix potential NULL urb dereference
  Revert "usb: gadget: net2280: Add support for PLX USB338X"
  USB: usbip: remove CONFIG_USB_DEBUG reference
  USB: remove CONFIG_USB_DEBUG from defconfig files
  usb: resume child device when port is powered on
  usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
  ...

It wasn't even being used for anything, so remove the test for the
config option (as the config option isn't present anymore), and remove
the unused module parameter "debug" so as to not confuse anyone.

Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: "Antti Seppälä" <a.seppala@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the dev_dbg dynamic infrastructure instead of rolling our own custom
debug logic.  This is needed as CONFIG_USB_DEBUG is now gone.

Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Sean Young <sean@mess.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jonathan McCrohan <jmccrohan@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The rr3_ftr function duplicates the in-kernel tracing logic, so remove
it.

This is step 1 of of removing the CONFIG_USB_DEBUG depandancy in this
driver.

Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Sean Young <sean@mess.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jonathan McCrohan <jmccrohan@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some drivers, like au0828 are very sensitive to tuner sleep and may
break if the sleep happens too fast. Also, by keeping the tuner alive
for a while could speedup tuning process during channel scan. So,
change the logic to delay the actual sleep to 5 seconds after its
command.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>