linux.git/drivers/media, branch v2.6.16

[PATCH] Kconfig: swap VIDEO_CX88_ALSA and VIDEO_CX88_DVB

2006-03-18T20:12:18+00:00

VIDEO_CX88_ALSA should not be between VIDEO_CX88_DVB and
VIDEO_CX88_DVB_ALL_FRONTENDS

When cx88-alsa was added to cx88/Kconfig, it was added in between
VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS.  This caused
undesireable effects to the appearance of the menu options in
menuconfig.

This fix reorders cx88-alsa and cx88-dvb in Kconfig, to match saa7134,
and restore the correct menuconfig appearance.

Signed-off-by: Michael Krufky 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Linus Torvalds

[PATCH] Fixed em28xx based system lockup

2006-03-18T18:52:45+00:00

Fixed em28xx based system lockup, device needs to be initialized before
starting the isoc transfer otherwise the system will completly lock up.

Signed-off-by: Markus Rechberger 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Linus Torvalds

[PATCH] Restore tuning capabilities in V4L2 MXB driver

2006-03-14T15:57:17+00:00

The behaviour of the all-in-one Video4Linux tuner driver apparently
changed.  It now wants to know the tv standard, otherwise it refuses to
tune.

Restore tuning functionality in my driver for the "Multimedia eXtension
Board".  The all-in-one tuner driver apparently changed its behaviour.

Signed-off-by: Michael Hunold 
Cc: Mauro Carvalho Chehab 
Cc: Johannes Stezenbach 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

V4L/DVB (3413): Typos grab bag of the month

2006-03-08T15:30:19+00:00

Typos grab bag of the month.
Eyeballed by jmc@ in OpenBSD.

Signed-off-by: Alexey Dobriyan 
Signed-off-by: Oliver Endriss 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3403): Workaround to fix initialization for Nexus CA

2006-03-08T15:29:08+00:00

Workaround for Nexus CA: Debi test fails unless first debi write is repeated.

Signed-off-by: Marco Schluessler 
Signed-off-by: Oliver Endriss 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3395): Fixed Pinnacle 300i DVB-T support

2006-03-03T17:18:23+00:00

- fixed tda9886 port 2 setting
- turned remote control receiver off via saa7134 GPIO to avoid i2c hangs
- modified tda9886 client calls to direct i2c access to allow proper return
  to analog mode
- allow mode change to V4L2_TUNER_DIGITAL_TV in tuner VIDIOC_S_FREQUENCY
  client call

Signed-off-by: Hartmut Hackmann 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3399): ELSA EX-VISION 500TV: fix incorrect PCI subsystem ID

2006-03-03T17:18:19+00:00

- ELSA EX-VISION 500TV was incorrectly programmed to have the same
  subsystem ID as ELSA EX-VISION 300TV, (1048:226b)
- This changeset replaces the incorrect subsystem ID (1048:226b)
  with the correct one (1048:226a) for the ELSA EX-VISION 500TV.

Signed-off-by: Michael Krufky 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3382): Fix stv0297 for qam128 on tt c1500 (saa7146)

2006-03-03T17:18:16+00:00

I have a TT C1500 card (saa7146, STV0297) which had problems tuning
channels at QAM128 (like the ones in the Finnish HTV / Welho network).
A fix which seems to work perfectly so far is to change the delay for
QAM128 to the same values as for QAM256 in stv0297_set_frontend(),

Signed-off-by: Mattias Nordstrom 
Signed-off-by: Michael Krufky 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3385): Dvb: fix init/exit section references in av7110 driver

2006-03-03T17:18:10+00:00

use __devinit/__devexit/__devexit_p() where appropriate

Signed-off-by: Johannes Stezenbach 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3378): Restore power on defaults of tda9887 after tda8290 probe

2006-03-03T17:18:07+00:00

The probing code for tda8290 changes the state of the tda9887 GP ports.
The patch assumes that if probing for tda8290 failed, this must be a 
tda9887 and restores its power on defaults.
This should solve the module load order issue with some pinnacle cards.

Signed-off-by: Hartmut Hackmann 
Signed-off-by: Mauro Carvalho Chehab