linux.git/drivers/media/rc/rc-loopback.c, branch v5.8

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37+00:00

Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman

media: rc: Remove init_ir_raw_event and DEFINE_IR_RAW_EVENT macros

2018-10-04T18:22:27+00:00

This can be done with c99 initializers, which makes the code cleaner
and more transparent. It does require gcc 4.6, because of this bug
in earlier versions:

	https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676

Since commit cafa0010cd51 ("Raise the minimum required gcc version to
4.6"), this is the case.

Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab

media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*

2017-08-20T14:02:48+00:00

RC_TYPE is confusing and it's just the protocol. So rename it.

Suggested-by: Hans Verkuil 
Signed-off-by: Sean Young 
Acked-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: rc-core: rename input_name to device_name

2017-08-20T13:43:52+00:00

When an ir-spi is registered, you get this message.

rc rc0: Unspecified device as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0

"Unspecified device" refers to input_name, which makes no sense for IR
TX only devices. So, rename to device_name.

Also make driver_name const char* so that no casts are needed anywhere.

Now ir-spi reports:

rc rc0: IR SPI as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0

Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab

[media] rc-main: assign driver type during allocation

2017-01-30T15:59:57+00:00

The driver type can be assigned immediately when an RC device
requests to the framework to allocate the device.

This is an 'enum rc_driver_type' data type and specifies whether
the device is a raw receiver or scancode receiver. The type will
be given as parameter to the rc_allocate_device device.

Change accordingly all the drivers calling rc_allocate_device()
so that the device type is specified during the rc device
allocation. Whenever the device type is not specified, it will be
set as RC_DRIVER_SCANCODE which was the default '0' value.

Suggested-by: Sean Young 
Signed-off-by: Andi Shyti 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab

[media] rc: rc-loopback: Add loopback of filter scancodes

2017-01-30T15:56:21+00:00

Add the s_wakeup_filter callback to the rc-loopback driver, which instead
of setting the filter just feeds the scancode back through the input
device so that it can be verified.

Signed-off-by: James Hogan 
Signed-off-by: Antti Seppälä 
Signed-off-by: Sean Young 
Cc: David Härdeman 
Signed-off-by: Mauro Carvalho Chehab

[media] rc: raw IR drivers cannot handle cec, unknown or other

2017-01-30T14:40:50+00:00

unknown and other are for IR protocols for which we have no decoder,
so the raw IR drivers have no chance of generating them. cec is not
an IR protocol.

Signed-off-by: Sean Young 
Cc: Jiri Kosina 
Cc: Benjamin Tissoires 
Cc: Bruno Prémont 
Signed-off-by: Mauro Carvalho Chehab

[media] media: Drop FSF's postal address from the source code files

2017-01-27T13:38:09+00:00

Drop the FSF's postal address from the source code files that typically
contain mostly the license text. Of the 628 removed instances, 578 are
outdated.

The patch has been created with the following command without manual edits:

git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \
	drivers/media/ include/media|while read i; do i=$i perl -e '
open(F,"< $ENV{i}");
$a=join("", );
$a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m
	&& $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m;
close(F);
open(F, "> $ENV{i}");
print F $a;
close(F);'; done

Signed-off-by: Sakari Ailus

Revert "[media] rc: rc-loopback: Add loopback of filter scancodes"

2015-08-19T10:02:53+00:00

This reverts commit 2e4ebde269236da2a41183522127715b6d9d80ce.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.

Signed-off-by: David Härdeman 
Acked-by: Antti Seppälä 
Signed-off-by: Mauro Carvalho Chehab

[media] rc: rc-loopback: Add loopback of filter scancodes

2015-05-14T17:35:59+00:00

Add the s_wakeup_filter callback to the rc-loopback driver, which instead of
setting the filter just feeds the scancode back through the input device
so that it can be verified.

Signed-off-by: James Hogan 
Signed-off-by: Antti Seppälä 
Cc: David Härdeman 
Signed-off-by: Mauro Carvalho Chehab