linux.git/drivers/media/rc/keymaps, branch v4.5

[media] lmedm04: NEC scancode cleanup

2015-07-06T11:26:15+00:00

This changes the keymap back to the state before commit 616a4b83
and changes the driver to use full NEC32 scancodes following the
instructions provided by Malcolm Priestley .

Signed-off-by: David Härdeman 
Signed-off-by: Mauro Carvalho Chehab

[media] rc-core: remove the LIRC "protocol"

2015-07-06T11:26:15+00:00

The LIRC protocol was always a bad fit and if we're ever going to expose
protocol numbers in a user-space API, it'd be better to get rid of the
LIRC "protocol" first.

The sysfs API is kept backwards compatible by always listing the lirc
protocol as present and enabled.

Signed-off-by: David Härdeman 
Signed-off-by: Mauro Carvalho Chehab

[media] rc/keymaps: add keytable for Twinhan DTV CAB CI

2015-06-10T14:52:25+00:00

This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.

Signed-off-by: Jan Klötzke 
Signed-off-by: Mauro Carvalho Chehab

[media] rc/keymaps: add keytable for Terratec Cinergy S2 HD

2015-06-10T14:51:41+00:00

This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.

Signed-off-by: Jan Klötzke 
Signed-off-by: Mauro Carvalho Chehab

[media] rc/keymaps: add keytable for Terratec Cinergy C PCI

2015-06-10T14:51:01+00:00

This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.

Signed-off-by: Jan Klötzke 
Signed-off-by: Mauro Carvalho Chehab

[media] rc/keymaps: add RC keytable for TechniSat TS35

2015-06-10T14:50:04+00:00

The TS35 remote is distributed with TechniSat CableStar HD2 cards (mantis
chipset). The exact protocol type is unknown, making this rc map probably only
usable by mantis cards.

Signed-off-by: Jan Klötzke 
Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2014-10-11T02:04:49+00:00

Pull media updates from Mauro Carvalho Chehab:

 - new IR driver: hix5hd2-ir

 - the virtual test driver (vivi) was replaced by vivid, with has an
   almost complete set of features to emulate most v4l2 devices and
   properly test all sorts of userspace apps

 - the as102 driver had several bugs fixed and was properly split into a
   frontend and a core driver.  With that, it got promoted from staging
   into mainstream

 - one new CI driver got added for CIMaX SP2/SP2HF (sp2 driver)

 - one new frontend driver for Toshiba ISDB-T/ISDB-S demod (tc90522)

 - one new PCI driver for ISDB-T/ISDB-S (pt3 driver)

 - saa7134 driver got support for go7007-based devices

 - added a new PCI driver for Techwell 68xx chipsets (tw68)

 - a new platform driver was added (coda)

 - new tuner drivers: mxl301rf and qm1d1c0042

 - a new DVB USB driver was added for DVBSky S860 & similar devices

 - added a new SDR driver (hackrf)

 - usbtv got audio support

 - several platform drivers are now compiled with COMPILE_TEST

 - a series of compiler fixup patches, making sparse/spatch happier with
   the media stuff and removing several warnings, especially on those
   platform drivers that didn't use to compile on x86

 - Support for several new modern devices got added

 - lots of other fixes, improvements and cleanups

* tag 'media/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits)
  [media] ir-hix5hd2: fix build on c6x arch
  [media] pt3: fix DTV FE I2C driver load error paths
  Revert "[media] media: em28xx - remove reset_resume interface"
  [media] exynos4-is: fix some warnings when compiling on arm64
  [media] usb drivers: use %zu instead of %zd
  [media] pci drivers: use %zu instead of %zd
  [media] dvb-frontends: use %zu instead of %zd
  [media] s5p-mfc: Fix several printk warnings
  [media] s5p_mfc_opr: Fix warnings
  [media] ti-vpe: Fix typecast
  [media] s3c-camif: fix dma_addr_t printks
  [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits
  [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64
  [media] em28xx: Fix identation
  [media] drxd: remove a dead code
  [media] saa7146: remove return after BUG()
  [media] cx88: remove return after BUG()
  [media] cx88: fix cards table CodingStyle
  [media] radio-sf16fmr2: declare some structs as static
  [media] radio-sf16fmi: declare pnp_attached as static
  ...

Documentation: fix broken v4l-utils URL

2014-10-03T13:49:57+00:00

This replaces http://git.linuxtv.org/v4l-utils/ (broken link)
by http://git.linuxtv.org/cgit.cgi/v4l-utils.git/

Signed-off-by: Michael Opdenacker 
Signed-off-by: Jiri Kosina

[media] rc: add a map for DVBSky devices.

2014-09-23T19:13:50+00:00

This is a RC5 remote controller map for DVBSky S860/960 devices.

Signed-off-by: Nibble Max 
Signed-off-by: Mauro Carvalho Chehab

[media] ati_remote: Better default keycodes

2014-07-26T02:59:06+00:00

This tries to make them more like other remotes, and/or
the button labels.

Notably, the (>>) button is made KEY_FASTFORWARD, which is the
correct opposite of (<<)'s KEY_REVERSE.  (It was KEY_FORWARD,
something else entirely.)

Likewise, KEY_STOP is the Sun keyboard "interrupt program" key;
the media key is KEY_STOPCD.

A restriction is that I try to avoid keycodes above 255, as the X11
client/server protocol is limited to 8-bit key codes.  If not for
this, I would have used the KEY_NUMERIC_x codes for the numbers.

Signed-off-by: George Spelvin 
Signed-off-by: Mauro Carvalho Chehab