linux.git/drivers/media/platform/vimc/vimc-capture.c, branch v5.6

media: vimc: Make capture devices and subdevices use different link_validates

2019-11-05T13:32:14+00:00

Instead of validating the links to capture devices and subdevices with
the same function, use the default v4l function for links between
subdevices and only use a different function for validating between
capture device and subdevice.
This change should also ease future work to associate multiple mbus
codes for the same pixelformat in vimc_pix_map.

These changes were tested with
v4l2-compliance SHA: 3f806630e2ecbcebe31872b865c5c4b42f111a99, 64 bits
and passed all tests:
Grand Total for vimc device /dev/media0: 451, Succeeded: 451, Failed: 0, Warnings: 0

Signed-off-by: Nícolas F. R. A. Prado 
Acked-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: move the dev field of each entity to vimc_ent_dev

2019-10-24T22:04:00+00:00

Since the 'struct device *dev' field exists in each of the
entity structs, it can be moved to the common struct vimc_ent_devevice.
It is then used to replace 'pr_err' with 'dev_err' in the streamer
code.

Signed-off-by: Dafna Hirschfeld 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: embed the pads of entities in the entities' structs

2019-10-24T22:03:28+00:00

since the pads array is of known small size, there is no reason to
allocate it separately. Instead, it is embedded in the entity struct.
This also conforms to the media controller doc:
'Most drivers will embed the pads array in a driver-specific structure,
avoiding dynamic allocation.'

Signed-off-by: Dafna Hirschfeld 
[hverkuil-cisco@xs4all.nl: remove unused vimc_pads_init()]
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: move media_entity_cleanup to release callbacks

2019-10-24T22:01:03+00:00

according to the docs, this function must be called during
the cleanup phase after unregistering the entity.

Signed-off-by: Dafna Hirschfeld 
Acked-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: Collapse component structure into a single monolithic driver

2019-10-01T15:34:13+00:00

vimc uses Component API to split the driver into functional components.
The real hardware resembles a monolith structure than component and
component structure added a level of complexity making it hard to
maintain without adding any real benefit.

The sensor is one vimc component that would makes sense to be a separate
module to closely align with the real hardware. It would be easier to
collapse vimc into single monolithic driver first and then split the
sensor off as a separate module.

Collapse it into a single monolithic driver removing the Component API.
This patch removes the component API and makes minimal changes to the
code base preserving the functional division of the code structure.
Preserving the functional structure allows us to split the sensor off
as a separate module in the future.

Major design elements in this change are:
- Use existing struct vimc_ent_config and struct vimc_pipeline_config
  to drive the initialization of the functional components.
- Make vimc_device and vimc_ent_config global by moving them to
  vimc-common.h
- Add two new hooks add and rm to initialize and register, unregister
  and free subdevs.
- All component API is now gone and bind and unbind hooks are modified
  to do "add" and "rm" with minimal changes to just add and rm subdevs.
- vimc-core's bind and unbind are now register and unregister.
- Add a new field to vimc_device structure for saving the pointers to
  struct vimc_ent_device(s) subdevs create in their "add" hooks. These
  get used to create links and removing the subdevs. vimc-core allocates
  this array which sized to number of entries in the topology defined in
  the vimc_pipeline_config structure.
- vimc-core invokes "add" hooks from its vimc_register_devices().
  The "add" hooks remain the same and register subdevs. They don't
  create platform devices of their own and use vimc's pdev.dev as
  their reference device. Each "add" hook returns pointer to its struct
  vimc_ent_device. This is saved in the vimc_device ent_devs array.
- vimc-core invokes "rm" hooks from its unregister to unregister subdevs
  and cleanup.
- vimc-core invokes "add" and "rm" hooks with pointer to struct vimc_device
  and the corresponding vimc_ent_device saved in the ent_devs.

The following configure and stream test works on all devices.

media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'

v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81

v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3

Signed-off-by: Shuah Khan 
Acked-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: Revert "media: vimc: propagate pixel format in the stream"

2019-08-13T14:40:38+00:00

This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799.

The requested pixelformat is being propagated from the capture to the
tpg in the sensor.

This was a bad design choice, as we start having the following issues:

* We set a pixelformat in the capture;
* We set matching media bus formats in the subdevices pads;
* Link validate looks fine (sizes matches, media bus formats matches);
* Issue: if some of the subdevice doesn't know how to generate the
requested pixelformat in the capture, then stream_on fails. This is bad
because capture says it supports that pixelformat, everything looks
fine, but it is not, and there is no way to find it out through the
links.

This patch was implemented so we could request any pixelformat from the
pipeline regardeless of the media bus format configured between pads.
Not all pixelformat can be mapped into a media bus code (e.g.
multiplanar formats), so with this patch we could request those
pixelformats from the tpg.

Solution: map pixelformats to media bus codes as before, and implement
conversions to other pixelformats in the capture to support multiplanar.

So first step to this solution is to revert this patch.

Signed-off-by: Helen Koike 
Signed-off-by: Lucas A. M. Magalhaes 
Tested-by: André Almeida 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: cap: check v4l2_fill_pixfmt return value

2019-06-24T18:58:40+00:00

v4l2_fill_pixfmt() returns -EINVAL if the pixelformat used as parameter is
invalid or if the user is trying to use a multiplanar format with the
singleplanar API. Currently, the vimc_cap_try_fmt_vid_cap() returns such
value, but vimc_cap_s_fmt_vid_cap() is ignoring it. Fix that and returns
an error value if vimc_cap_try_fmt_vid_cap() has failed.

Signed-off-by: André Almeida 
Suggested-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37+00:00

Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman

media: vimc: propagate pixel format in the stream

2019-04-22T14:58:51+00:00

Media bus codes were being mapped to pixelformats, which causes a
limitation on vimc because not all pixelformats can be mapped to media
bus codes.
Also, media bus codes are an internal configuration from the device.
Userspace only assures media bus codes matches between pads and expects
the image in a given pixelformat. So we can allow almost any media bus
format to be configured between pads, except for debayer that expects a
media bus code of type bayer in the sink pad.

[hverkuil-cisco@xs4all.nl: drop use of v4l2_get_fourcc_name: not yet available]
[hverkuil-cisco@xs4all.nl: made vimc_mbus_list static]

Signed-off-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: cap: fix step width/height in enum framesize

2019-03-19T19:28:26+00:00

The type V4L2_FRMSIZE_TYPE_CONTINUOUS expects a step of 1.
This fixes v4l2-compliance test error:

        fail: v4l2-test-formats.cpp(184): invalid step_width/height for continuous framesize
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL

Signed-off-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab