Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ...
QCOM_UBWC_CONFIG is about to depend on QCOM_SMEM. Guard the
VIDEO_QCOM_IRIS select with 'if ARCH_QCOM && QCOM_SMEM', and add
'depends on QCOM_SMEM || QCOM_SMEM=n' so a built-in driver is never
selected against a missing or modular SMEM.
Fixes: c43207553867 ("media: iris: retrieve UBWC platform configuration")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More Qualcomm driver updates for v7.3 Add SMEM parsing for DDR configuration data and use its highest bank address bit to select the appropriate UBWC configuration. Enable generic PAS trusted-zone APIs for the Iris and Venus media drivers. Fix SCM probe retry state, reserved-memory cleanup, and an early IRQ-handler NULL dereference. Enable QSEECOM EFI variable access on the Asus Zenbook A16. Correct GENI firmware-size validation using the hardware CFG RAM depth and correct the PMIC GLINK Thunderbolt extradata layout. Document the Nord AOSS side channel and the IMEM minidump SRAM property. Clean up Qualcomm statistics macros and the WCNSS binding schema. * tag 'qcom-drivers-for-7.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: media: qcom: Switch to generic PAS TZ APIs dt-bindings: soc: qcom,aoss-qmp: Document Nord AOSS side channel dt-bindings: sram: qcom,imem: Add minidump-sram pattern property soc: qcom: qcom_stats: Replace CLIENT_VOTES_OFFSET macro with sizeof() soc: qcom: qcom_stats: Remove unused macro definitions soc: qcom: ubwc: Get HBB from SMEM soc: qcom: smem: Expose DDR data from SMEM soc: qcom: smem: Use 'unsigned int' instead of 'unsigned' firmware: qcom: scm: Fix tzmem state on probe retry firmware: qcom: scm: Fix reserved memory cleanup on probe failure firmware: qcom: scm: Fix NULL dereference in IRQ handler before __scm is published firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A16 (UX3607OA) soc: qcom: geni-se: Use HW PROG_RAM_DEPTH to validate firmware size soc: qcom: pmic_glink_altmode: Define the TBT extradata properly dt-bindings: soc: qcom,wcnss: Drop redundant $ref of firmware-name property Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Switch qcom media client drivers over to generic PAS TZ APIs. Generic PAS TZ service allows to support multiple TZ implementation backends like QTEE based SCM PAS service, OP-TEE based PAS service and any further future TZ backend service. Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Tested-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> # Lemans Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260702115835.167602-10-sumit.garg@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ISPIF_VFE_m_RDI_INTF_n_PACK_CFG_0_CID_c_PLAIN() macro declares a parameter named 'c' but uses 'cid' in the macro body instead. Rename the parameter to match the identifier used in the macro body and silence the checkpatch warning: WARNING: Argument 'c' is not used in function-like macro No functional change intended. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Hungyu Lin <dennylin0707@gmail.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The iris encoder driver was not sending HFI_PROP_TIME_DELTA_BASED_RATE_CONTROL to the firmware during encoder initialization. Without this property, the firmware defaults to time-delta-based rate control (enabled), which calculates the output bitrate from actual frame timing rather than following the configured bitrate target. This caused variable bitrate (VBR) encoding to produce ~5x configured bitrate. For example, with video_bitrate=896000 (896 Kbps), the output is ~4.4 Mbps instead of the expected ~896 Kbps. Time-delta-based rate control is designed for variable frame rate (VFR) scenarios where the encoder adapts to actual frame timing. However, when an application explicitly configures a bitrate target, the firmware must follow that target regardless of frame timing. Fix this by adding the TIME_DELTA_BASED_RC capability with a default value of 0 (disabled) and sending HFI_PROP_TIME_DELTA_BASED_RATE_CONTROL = 0 to the firmware during stream-on, allowing the firmware to use the configured bitrate as the target. Signed-off-by: Gourav Kumar <gouravk@qti.qualcomm.com> Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com> Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add support for the Milos Iris codec. This only supports the variant found on the SM7635-AB that has half of it's pipes disabled via efuse. Signed-off-by: Alexander Koskovich <akoskovich@pm.me> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add request key frame support for both gen1 and gen2 encoders by enabling V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com> Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com> Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Some Iris platforms support both Gen1 and Gen2 HFI firmware images. Update the firmware loading logic to handle this generically by preferring Gen2 when available, while safely falling back to Gen1 when required. The firmware loading logic is updated with the following priority: 1. Device Tree (`firmware-name`): If specified, load unconditionally. 2. Gen2 default : If no DT override exists, select the Gen2 firmware descriptor when present and attempt to load the corresponding firmware image. 3. Gen1 Fallback: If loading the Gen2 firmware fails and a Gen1 descriptor is available, retry with the Gen1 firmware image. When a platform provides both Gen1 and Gen2 firmware descriptors and the firmware is loaded via a DT override, the driver detects the firmware generation at runtime before authentication by inspecting the firmware data. The firmware is classified as Gen2 if the QC_IMAGE_VERSION_STRING starts with "vfw" or matches the "video-firmware.N.M" format with N >= 2. If a Gen1 firmware image is detected in this case, the driver switches to the Gen1 firmware descriptor and associated platform data so that the correct HFI implementation is used. This change makes firmware generation detection platform‑agnostic, preserves DT overrides, prefers newer Gen2 firmware when available, and maintains compatibility with platforms that only support Gen1. Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com> Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com> Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add __counted_by() annotations to flexible array members: - hfi_capabilities::data, counted by num_capabilities - hfi_profile_level_supported::profile_level, counted by profile_count - hfi_resource_ocmem_requirement_info::requirements, counted by num_entries This improves run-time bounds checking via CONFIG_UBSAN_BOUNDS and compile-time object size resolution via __builtin_dynamic_object_size(). Assisted-by: Claude:claude-opus-4 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Mohammed EL Kadiri <med08elkadiri@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org>