linux.git/drivers/media/dvb, branch v2.6.18 Linux kernel source tree V4L/DVB (4608b): i2c deps fix on DVB 2006-09-10T16:45:58+00:00 Andrew de Quincey adq_dvb@lidskialf.net 2006-09-10T16:43:40+00:00 c482d4f6e87932092c0a30da8e6403b23544f894 Several DVB modules depends on I2C Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Several DVB modules depends on I2C

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4431): Add several error checks to dst 2006-08-08T18:53:04+00:00 Yeasah Pell yeasah@schwide.com 2006-08-08T12:10:18+00:00 0851fb48486c044476b019029245cb9b348fca33 Signed-off-by: Yeasah Pell <yeasah@shwide.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Signed-off-by: Yeasah Pell <yeasah@shwide.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4411): Fix minor errors in build files 2006-08-08T18:53:03+00:00 Trent Piepho xyzzy@speakeasy.org 2006-08-08T12:10:12+00:00 b02dc515914bc37f5e406cc6f622fc06991eb779 In pwc Kconfig, change 'depends' to 'depends on' In dvb-core Makefile, change '=' to ':=' Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
In pwc Kconfig, change 'depends' to 'depends on'
In dvb-core Makefile, change '=' to ':='

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4322): Fix dvb-pll autoprobing 2006-07-29T20:22:26+00:00 Andrew de Quincey adq_dvb@lidskialf.net 2006-07-18T19:37:13+00:00 95faba22d8b81f0cd85b995232b7d05c45a26f3e Trent Piepho pointed out that the pll test i2c transmission is slightly wrong; it was transmitting a zero length message, and then reading from the PLL. This was wrong; it should only be transmitting a single read i2c message. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Trent Piepho pointed out that the pll test i2c transmission is slightly
wrong; it was transmitting a zero length message, and then reading from the
PLL. This was wrong; it should only be transmitting a single read i2c message.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4311): Fix possible dvb-pll oops 2006-07-29T20:22:25+00:00 Andrew de Quincey adq_dvb@lidskialf.net 2006-07-16T22:41:41+00:00 55c05b6d226f68266d1f88dd81795b04d096b1c8 Supplying a NULL i2c adapter to dvb_pll_attach is allowed, for example with mt352 demods. However, the pll i2c probe will segfault because it does not check for this. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Supplying a NULL i2c adapter to dvb_pll_attach is allowed, for example with
mt352 demods. However, the pll i2c probe will segfault because it does not
check for this.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4323): [budget/budget-av/budget-ci/budget-patch drivers] fixed DMA start/stop code 2006-07-29T20:22:23+00:00 Oliver Endriss o.endriss@gmx.de 2006-07-19T01:55:23+00:00 32e4c3a5622e832938aa0272e21a292564ff090a Fix bug reported by Andrew de Quincey: After cold boot the saa7146 DMA did not start if the demuxer was opened before the frontend has locked to the signal. DMA transfers will be started now if (and only if) the frontend is locked and data should be sent to the demuxer. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Fix bug reported by Andrew de Quincey:
After cold boot the saa7146 DMA did not start if the demuxer was opened
before the frontend has locked to the signal.
DMA transfers will be started now if (and only if)
the frontend is locked and data should be sent to the demuxer.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4295): Fix typo in comment for TDA9819 2006-07-29T20:22:12+00:00 Marco Schluessler marco@lordzodiac.de 2006-07-10T06:34:16+00:00 6a85774741f1ef1a47ba0670e99c97e892930cad Fix typo in comment for TDA9819 Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Fix typo in comment for TDA9819

Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4294): Fix broken tda665x PLL definition. 2006-07-29T20:22:11+00:00 Andrew de Quincey adq_dvb@lidskialf.net 2006-07-10T06:34:15+00:00 93e2b1ae97dedd66ca0cb8ac1a5ceb4904631091 It was pointed out on the mailing list that this PLL definition is broken. I went back to the original dibusb driver and confirmed it used to use these settings, as well as consulting the datasheet. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
It was pointed out on the mailing list that this PLL definition is broken. I
went back to the original dibusb driver and confirmed it used to use these
settings, as well as consulting the datasheet.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4293): Fix unstable DISEQC behaviour on budget cards. 2006-07-29T20:22:10+00:00 Andrew de Quincey adq_dvb@lidskialf.net 2006-07-10T06:34:15+00:00 f2813093810276a2a3c1f116f23baf2ab7a669bd Use the stv0299 native DISEQC implementation instead of the bitbanging one as required by the ves1893. This was originally found by Oliver Endriss. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Use the stv0299 native DISEQC implementation instead of the bitbanging one
as required by the ves1893. This was originally found by Oliver Endriss.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4292): Fix DISEQC regression 2006-07-29T20:22:09+00:00 Andrew de Quincey adq_dvb@lidskialf.net 2006-07-10T06:34:14+00:00 04c56d0e5b27f1f65e4d20b46731d55341d42a6a The changes to add frontend reinitialisation moved the position where the init() op is called into the frontend thread. Unfortunately, since DISEQC operations do not use the frontend thread, this meant that DISEQC could be called against an uninitalised frontend, leading to all sorts of trouble. Patch fixes this by reinstating the original fronted intialisation call. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
The changes to add frontend reinitialisation moved the position where the
init() op is called into the frontend thread. Unfortunately, since DISEQC
operations do not use the frontend thread, this meant that DISEQC could be
called against an uninitalised frontend, leading to all sorts of trouble.
Patch fixes this by reinstating the original fronted intialisation call.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>