linux.git/drivers/media/dvb/frontends, branch master

[media] move the dvb/frontends to drivers/media/dvb-frontends

2012-08-14T02:13:41+00:00

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab

[media] dvb: move the dvb core one level up

2012-08-14T02:08:14+00:00

just like the V4L2 core, move the DVB core to drivers/media, as the
intention is to get rid of both "video" and "dvb" directories.

Signed-off-by: Mauro Carvalho Chehab

[media] dvb: frontends: use %*ph to dump small buffers

2012-08-13T19:38:19+00:00

Signed-off-by: Andy Shevchenko 
Acked-by: Antti Palosaari 
Signed-off-by: Mauro Carvalho Chehab

[media] add DTMB support for DVB API

2012-08-13T19:01:17+00:00

Cc: Patrick Boettcher 
Cc: Andreas Oberritter 
Cc: Mauro Carvalho Chehab 
Acked-by: Patrick Boettcher 
Signed-off-by: Antti Palosaari 
Signed-off-by: Mauro Carvalho Chehab

[media] dvb: nxt200x: apply levels to the printk()s

2012-08-12T14:58:58+00:00

Signed-off-by: Andy Shevchenko 
Signed-off-by: Mauro Carvalho Chehab

[media] m88rs2000: add missing FE_HAS_SYNC flag

2012-08-12T10:55:57+00:00

Cc: Malcolm Priestley 
Signed-off-by: Antti Palosaari 
Signed-off-by: Mauro Carvalho Chehab

[media] dvb: add support for Thomson DTT7520X

2012-08-12T02:26:37+00:00

Add support for Thomson DTT7520X pll needed by
ngene card Terratec Cynergy 2400i DT

Signed-off-by: Patrice Chotard 
Signed-off-by: Mauro Carvalho Chehab

[media] au0828: prevent i2c gate from being kept open while in analog mode

2012-08-09T23:37:56+00:00

The original implementation of the analog support would use an
i2c_gate_ctrl function when using the digital side of the au8522, but on
the analog side we would always just force the gate open and leave it
open all the time.

This can have adverse effects on the xc5000 given the tuner is receiving
all the spurious i2c traffic (a problem which can be exaggerated due to
bugs in the au0828 i2c hardware implementation).

Rework the existing hack to only open/close the gate when actually
talking to the tuner.

This logic might need to be reworked a bit if anybody ever tries to add
support for a board that has the au0828/au8522 but doesn't have digital
support implemented (because the i2c_gate_ctrl callback is being set in
the DVB attach).  However given how few different models are in
circulation, this can be deferred until such a situation arises (if
ever).

Signed-off-by: Devin Heitmueller 
Signed-off-by: Mauro Carvalho Chehab

[media] au8522: fix regression in logging introduced by separation of modules

2012-08-09T23:35:55+00:00

The au8522 driver was broken into three modules (dig, decoder, common),
and as a result the debug modprobe option doesn't work for any of the
common functions.

Copy the module macros over to the common module so that the debug
option works again.

Signed-off-by: Devin Heitmueller 
Signed-off-by: Mauro Carvalho Chehab

[media] au8522: Fix off-by-one in SNR table for QAM256

2012-08-09T23:29:43+00:00

The table of valid SNR values for QAM 256 is off by one, and as a result
if the SNR is oscillating between 40.0 and 39.9 dB, tools like azap show
it going back and forth between 40.0 and 0 (misleading some people,
including myself, to think signal lock is being lost or there is a
problem with register reads).

Fix the table so that 40.0 dB is properly represented.

Cc: Steven Toth 
Signed-off-by: Devin Heitmueller 
Signed-off-by: Mauro Carvalho Chehab