linux.git/drivers/media/common, branch v2.6.31

V4L/DVB (12394): cx88: Disable xc3028 power management for Geniatech x8000

2009-08-13T23:39:07+00:00

A user discovered that the Geniatech x8000 encountered a regression when
the xc3028 power management was introduced.  The xc3028 never recovers after
setting the powerdown register, which is probably because the xc3028 reset
GPIO is not properly configured.  Since I do not have access to the hardware
and thus cannot determine the correct GPIO configuration, just disable xc3028
power management on this board, which fixes the regression.

Thanks to user "ritec" for reporting the issue and testing the fix.

Cc: rictec 
Signed-off-by: Devin Heitmueller 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12341): zl10353 and qt1010: fix stack corruption bug

2009-08-13T23:39:02+00:00

Fixes stack corruption bug present in dump_regs function of zl10353 and
qt1010 drivers: the buffer buf was one byte smaller than required -
there are 4 chars for address prefix, 16 * 3 chars for dump of 16 eeprom
bytes per line and 1 byte for zero ending the string required, i.e. 53
bytes, but only 52 were provided.

The one byte missing in stack based buffer buf can cause stack
corruption possibly leading to kernel oops, as discovered originally
with af9015 driver (af9015: fix stack corruption bug).

Signed-off-by: Jan Nikitenko 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12167): tuner-xc2028: Fix 7 MHz DVB-T

2009-07-05T17:29:57+00:00

The following patch should fix 7 MHz DVB-T with the XC3028 using the
DTV7 firmware from the xc3028-v27.fw firmware image.

Tested-by: Terry Wu 
[mchehab@redhat.com: thanks to John Ferlito, we have a real test in Australia]
Signed-off-by: Andy Walls 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12102): em28xx: add Remote control support for EVGA inDtube

2009-06-23T06:14:25+00:00

Add an IR profile for the EVGA inDtube remote control (which is an NEC type
remote)

Signed-off-by: Devin Heitmueller 
Signed-off-by: Mauro Carvalho Chehab

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

2009-06-17T04:15:42+00:00

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (425 commits)
  V4L/DVB (11870): gspca - main: VIDIOC_ENUM_FRAMESIZES ioctl added.
  V4L/DVB (12004): poll method lose race condition
  V4L/DVB (11894): flexcop-pci: dmesg visible names broken
  V4L/DVB (11892): Siano: smsendian - declare function as extern
  V4L/DVB (11891): Siano: smscore - bind the GPIO SMS protocol
  V4L/DVB (11890): Siano: smscore - remove redundant code
  V4L/DVB (11889): Siano: smsdvb - add DVB v3 events
  V4L/DVB (11888): Siano: smsusb - remove redundant ifdef
  V4L/DVB (11887): Siano: smscards - add board (target) events
  V4L/DVB (11886): Siano: smscore - fix some new GPIO definitions names
  V4L/DVB (11885): Siano: Add new GPIO management interface
  V4L/DVB (11884): Siano: smssdio - revert to stand alone module
  V4L/DVB (11883): Siano: cards - add two additional (USB) devices
  V4L/DVB (11824): Siano: smsusb - change exit func debug msg
  V4L/DVB (11823): Siano: smsusb - fix typo in module description
  V4L/DVB (11822): Siano: smscore - bug fix at get_device_mode
  V4L/DVB (11821): Siano: smscore - fix isdb-t firmware name
  V4L/DVB (11820): Siano: smscore - fix byte ordering bug
  V4L/DVB (11819): Siano: smscore - fix get_common_buffer bug
  V4L/DVB (11818): Siano: smscards - assign gpio to HPG targets
  ...

V4L/DVB (11934): Change order for FM tune

2009-06-16T22:07:25+00:00

Change order data of buffer in FM simple_tune function. It is usefull for:

1. Set data of tuner with CP bit UP. 0xCE for MK5 or 0xC6 for MK3
2. When call simple_fm_tune, read this byte from config and overwrite
this byte in function simple_radio_bandswitch for set CP bit to OFF.

Of course it can be usefull for other tuner for overwrite default
settings of FM.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11933): tuner-simple, tveeprom: Add Philips FQ1216LME MK3 analog tuner

2009-06-16T22:07:25+00:00

Signed-off-by: Andy Walls 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11922): tuner-xc2028: cleanup: better use tuner type defines

2009-06-16T22:07:18+00:00

Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11918): tuner-xc2028: Fix offset frequencies for DVB @ 6MHz

2009-06-16T22:07:18+00:00

Both ATSC and DVB @ 6MHz bandwidth require the same offset.

While we're fixing it, let's cleanup the bandwidth setup to better
reflect the fact that it is a function of the bandwidth.

Thanks to Terry Wu  for pointing this issue and
to Andy Walls  for an initial patch for this fix.

Cc: Terry Wu 
Acked-by: Andy Walls 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11917): Fix firmware load for DVB-T @ 6MHz bandwidth for xc3028/xc3028L

2009-06-16T22:07:17+00:00

The only two countries that are known to use 6MHz bandwidth are Taiwan
and Uruguay. Both use QAM subcarriers at OFTM.

This patch fixes the firmware load for such countries, where the
required firmware is the QAM one.

This also confirms the previous tests where it was noticed that the 6MHz
QAM firmware doesn't work for cable. So, this patch also removes support
for DVB-C, instead of just printing a warning.

Thanks to Terry Wu  for pointing this issue and
to Andy Walls  for an initial patch for this fix.

Cc: Terry Wu 
Acked-by: Andy Walls 
Signed-off-by: Mauro Carvalho Chehab